Daewoo led model em46h1b tp.ms608 c13261 panel khv64002 dledm
Daewoo led model em46h1b tp.ms608 c13261 panel khv64002 dledm
Daewoo led model em46h1b tp.ms608 c13261 panel khv64002 dledm
-
-
DAEWOO LM32L1S Main Board-T MS6M181.1B 11223 PANEL LTA320AP05
DAEWOO LM32L1S Main Board-T MS6M181.1B 11223 PANEL LTA320AP05Comment
-
Daewoo LM32L1S Main Board T.MS6M181.1B 11223 Panel LTI320AP01
Daewoo LM32L1S Main Board T.MS6M181.1B 11223 Panel LTI320AP01Comment
-
daewoo.dw-3281 tp.sis231.pt85 hk315ledm-ehg8h
daewoo.dw-3281 tp.sis231.pt85 hk315ledm-ehg8hComment
-
em32a1b main ms6m181.a12021 panel lta320an12
em32a1b main ms6m181.a12021 panel lta320an12Comment
-
DAEWOO ET32R3B main;T.MSD309.B81B 12115 PANELMT3151A-1 ver .14
DAEWOO ET32R3B main;T.MSD309.B81B 12115 PANELMT3151A-1 ver .14Comment
-
Re: Eeprom dump thread!
useful software for17mb65Comment
-
Re: Eeprom dump thread!
useful soft for 17mb62Comment
-
Re: Eeprom dump thread!
useful soft for mb61Comment
-
Re: Eeprom dump thread!
please need a dump lg55eg910vComment
-
Re: Eeprom dump thread!
please dump lg55eg910vComment
-
Re: Eeprom dump thread!
TD Systems K32DLM4H - K32DLM6H Firmware
Mainboard TP.S506.PB818.
http://gofile.me/6ojCY/PmTO1hxfrComment
-
Re: Eeprom dump thread!
Looking for EEPROM dump from Element ELEFW504 U6
CV3393BH-A50 SY14409-6Comment
-
Re: Eeprom dump thread!
ThanksComment
-
Re: Eeprom dump thread!
Hi,
can you help me please, i need a firmware for this board :
17mb211 VESTEL
and the screen model was : VES550UNDL-2D-N11
Thanks for your help.Comment
-
Re: Eeprom dump thread!
sorry i forgot the model of TV : Hitachi 55hb16t72u
ThanksComment
-
Re: Eeprom dump thread!
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍Comment
-
Re: Eeprom dump thread!
Just had a Blaupunkt 43/134M-GB-11B-FEGUX-UK with main board TP.MS6486.PB711 and screen LC430DUY-SHA1
It required firmware which can be requested from here:
http://www.umc-poland.com/datasheet/...-11b-fegux-uk/
Use email to request it:
poland@blaupunkt-europe.com
Its 297MB in size so unable to upload here!
However looking at one of the files the 'UMC_KMODE.txt' contains details as to what is enabled ie PVR which is currently disabled so by changing these I have now enabled the PVR options on the TV. It works well now
Attached is the original file and modified one to enable the PVR options.
I would suggest if you wish to use the PVR that you use the 297MB file that UMC send you just substitute the 'UMC_KMODE.txt' file with the one in the modded folder.
The original and modded files are attached.
See attached pictures of PVR workingAttached FilesComment
-
-
Re: Eeprom dump thread!
hi would it be possible to supply a link to download for a usb flash for
JVC LT32C655C
17MB110
VES315WNDS-2D-N13
ThanksComment
-
Re: Eeprom dump thread!
Here, but it's for Orion. Same motherboard and same panel.
https://www.electronicforum.ro/viewt...S+2D+N13#p8752Comment
-
Hello, This might be a long shot, but I'm looking for an EEPROM dump for a HP Photosmart C4280 All-in-one printer.
The printer seems to be in cartridge alignment mode. Sometimes it print the alignment page and then hangs during the scanning step, sometimes it hangs during the printing process and sometimes it hangs during the boot process. If I let it idle for a while then it flashes the back-light of the top screen and there's a letter E. Bottom screen is asking me to restart it to no avail. I have to remove the power cable from the printer for a couple of minutes to make it work...02-17-2022, 09:09 PM -
Good day to every one,
I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
Does anybody have an eeprom dump file? I really appreciate any help.
Thanks in advance.07-01-2024, 09:04 PM -
P14s Gen 2
HT4B0/HP4B0/HT5B1/HT4B2
NM-D352 Rev 1.0
sn PF-35P15W
Requesting thunderbolt dump
also attached is the tbt dump. I extracted the bin from the cap file and modified it, not sure if it's correct. also didnt work.... -
Hi
I was working all day on a 42" with no backlight = Driver is bad . LED Tester. Image exists
As I was reassembling, I discovered faults on the screen ( used the LED Tester to power the strips).
Right distribution board, 2 Flexs, near them:
The one near the center has 1" line on screen. Pressing on the board-side or Panel side of the Flex bonding place results in some change, I sensed heating one time, but main fault line remains
The other, pressing on the Panel to the Chassey and the lines disappears 99.99%
I... -
Comment