Re: Eeprom dump thread!
Hi Friends,
I need firmware update for Hyundai DLH32285Smart.
Main board 17mb95s-1
thanks
Tom
Hi Friends,
I need firmware update for Hyundai DLH32285Smart.
Main board 17mb95s-1
thanks
Tom
-
-
Re: Eeprom dump thread!
Did you manage to get hold of a good dump for this main board from the model you stated? As it would be very helpful if you could upload the dump here? As I am after a good dump for the Technika LED40-248 Main board T.MSD306.69A 11345 with screen LTA400HM13
ThanksComment
-
Re: Eeprom dump thread!
please i want to update 17mb70-5 v1. tv cant start so if you can help me get the update file. thanksComment
-
Re: Eeprom dump thread!
can someone help me to get 17mb95m, update file and i want to know how the step are. thanksComment
-
Re: Eeprom dump thread!
Hi all,
Does anyone have a
dump for a COBY TFTV4028
Main Board---002-FV40-2812-00R
Panel---T400HW03 V.2
ThanksComment
-
Re: Eeprom dump thread!
looking for eeprom dump from U10 for toshiba 40D1333B board 17MB95S-1
screen type samsung LTA400HM23.
please, if anyone could help.
i have flashing red/green standby,Comment
-
Re: Eeprom dump thread!
HI. frends: i need dump imperial lcd tv 32 saverious c.i
cv109m v1.3 .. t315xw02 vl
thanks...Attached FilesComment
-
-
Eprom
Hk-t.rt2968p61 flash?Comment
-
Re: Eeprom dump thread!
Akai LT3223 TP.S506.PB818
Panel: V320BJ7-PE1Comment
-
Re: Eeprom dump thread!
any one has LG w2252s dump?Comment
-
Re: Eeprom dump thread!
Good Morning.
Can anyone get me the dump of memories (25Q32 and 25Q16)
for the tv Blaupunkt mod. 39 / 401I-GB-5B-1UHBKUP-EU with chassis T.MSD309.BTU87.
Thanks Rui SalguinhoComment
-
Re: Eeprom dump thread!
17MB211S and VES315WNDS-2D-N21
Flash dump or Full firmware?? PLEASE
https://drive.google.com/open?id=1-j...F9miuzfUUOS349Comment
-
Hello, This might be a long shot, but I'm looking for an EEPROM dump for a HP Photosmart C4280 All-in-one printer.
The printer seems to be in cartridge alignment mode. Sometimes it print the alignment page and then hangs during the scanning step, sometimes it hangs during the printing process and sometimes it hangs during the boot process. If I let it idle for a while then it flashes the back-light of the top screen and there's a letter E. Bottom screen is asking me to restart it to no avail. I have to remove the power cable from the printer for a couple of minutes to make it work...02-17-2022, 09:09 PM -
Good day to every one,
I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
Does anybody have an eeprom dump file? I really appreciate any help.
Thanks in advance.07-01-2024, 09:04 PM -
P14s Gen 2
HT4B0/HP4B0/HT5B1/HT4B2
NM-D352 Rev 1.0
sn PF-35P15W
Requesting thunderbolt dump
also attached is the tbt dump. I extracted the bin from the cap file and modified it, not sure if it's correct. also didnt work.... -
Hi
I was working all day on a 42" with no backlight = Driver is bad . LED Tester. Image exists
As I was reassembling, I discovered faults on the screen ( used the LED Tester to power the strips).
Right distribution board, 2 Flexs, near them:
The one near the center has 1" line on screen. Pressing on the board-side or Panel side of the Flex bonding place results in some change, I sensed heating one time, but main fault line remains
The other, pressing on the Panel to the Chassey and the lines disappears 99.99%
I... -
Comment