Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Thank you!!. That Dump really works!...
-
-
-
-
Re: TOSHIBA C50-A544 Bios Dump Please..
Hello, thanks for sharing the BIOS. This motherboard has two chips. One of 2M, and the other of 4M. Well, in the 2M, there is the ME Region. I have downloaded both files from here, I have cleaned ME, and now, I share it with you.
In Summary.... I attached both files, and the smaller one, containing ME Region, is clean. Thank you!!....
Leave a comment:
-
-
Re: Need:Medion Akoya MD E6232 bios dump
Hi, I Need EC BIOS Dump Please....
Leave a comment:
-
Re: E5-573 da0zrtmb6d0 need brd files and audio problem
thank youLast edited by SMDFlea; 11-19-2021, 03:47 PM.
Leave a comment:
-
Re: Panasonic Toughbook CF-53 Mk3 BIOS Password Removal
Hello, I have done what you indicate, and it has worked for me. It asked me for a password to enter the BIOS, and now it no longer asks me for it. Thanks a lot!!!...
Leave a comment:
-
Re: i need schematic HP 15-cc502nw DAG71MB16D0
I am attaching the boardview....
Leave a comment:
-
Re: i need schematic HP 15-cc502nw DAG71MB16D0
[url]https://www.badcaps.net/forum/showthread.php?t=77578[/url]Re: i need schematic HP 15-cc502nw D...?t=77578[/url]
Leave a comment:
-
Compal LA-E011P
Good morning, as I have downloaded many diagrams from this forum, I share this with you, that more than one has looked for it and has had to pay. Thanks for sharing!......
-
Re: Eeprom dump thread!
TD Systems K32DLM4H - K32DLM6H Firmware
Mainboard TP.S506.PB818.
[URL="http://gofile.me/6ojCY/PmTO1hxfr"]http://gofile.me/6ojCY/PmTO1hxfr[/URL]Re: Eeprom dump thread!
TD Systems K32DLM4H - K32DLM6H Firmware
Mainboard TP.S506.PB818.
[URL="http://gofile.me/6ojCY/PmTO1hxfr"]http://gofile.me/6ojCY/PmTO1hxfr[/URL]
Leave a comment:
-
-
Re: 6050A2371701-mb-a01 bios needed !
Hello colleagues, here I bring the BIOS with ME clean Inventec 6050a2371701.
I hope you take advantage of it. It is verified and it works.
[URL="https://mega.nz/#!ZsdWzSgB!JPZJUh5mHEh7U4EmH0mjIzMBb2NB9NzeL4nCy02SzQw"]6050a2371701 Clean ME[/URL]Re: 6050A2371701-mb-a01 bios needed !
Hello colleagues, here I bring the BIOS with ME clean Inventec 6050a2371701.
I hope you take advantage of it. It is verified and it works.
[URL="https://mega.nz/#!ZsdWzSgB!JPZJUh5mHEh7U4EmH0mjIzMBb2NB9NzeL4nCy02SzQw"]6050a2371701Last edited by joaquinmjuan; 04-25-2019, 11:12 PM.
Leave a comment:
-
Re: DELTA ADP-200DFB Imac 21,5" 2009 Power Supply
Hello, in the post I put the components that have replaced. The source is screen printed the names of the components, so you have no problem looking for them. I can not put pictures because ago much of this, and I have no source for photos.
Anyway, do not change for change ..... to repair, must be checked first.
Usually (but not always) fail components that handle "A lot of current" such as the mosfet switching diode bridge, etc. Check in your case, if any of these components is...
Leave a comment:
-
-
Mac Pro Early 2009 A1289 PSU 614-0454 bad
Hello, good afternoon. I tell you what I have ....
I purchased a Mac Pro A1289. The team has some LEDs Test. When I plug in a moment the first two come on and then go off.
If I plug while squeezed power, the LEDs remain lit, but only the first two. The third, which is PSUPWROK, not light.
From this, I conclude that the PSU is bad (if not, please correct me).
Now the first problem I have is that there is no human way to find the schema of this team .....
Then, there is no human form that appears around a pin out of the PSU, nor how to make it start ...
...
-
Re: Hp dv6 hpmh-41-ab6200-e00g
Thanks for the schematic!!!!!!...
Leave a comment:
-
Re: DELTA ADP-200DFB Imac 21,5" 2009 Power Supply
Hi, I have fixed the problem ..... had turned upside down the rectifier bridge. Typically, screen printing is left out, and the other side of the rectifier bridge, getting stuck to the heatsink. In this case, it is just the opposite, and not watch the polarity is marked on the plate, then put it wrong. Hence, Q2 is put in short.
In short, I replaced Q1 and Q3 that were in short, the rectifier bridge HS1 was short, and fuse F1.
The source, and operating normally.
Thank You !!
...
Leave a comment:
No activity results to display
Show More
Leave a comment: