Test Equipment

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dick_barton
    Badcaps Legend
    • Aug 2015
    • 6642
    • Wales
    #1

    Test Equipment

    Came across an article advertising this websites product which could prove to be of use when repairing sets. Isolation of 600V, wireless and the ability to log the data it receives.

    https://moosh.im/mooshimeter/
    Willing to help but I'm no expert.
    Tags: None
    • retiredcaps
      Badcaps Legend
      • Apr 2010
      • 9271
      #2
      Re: Test Equipment

      Lots of discussion over at eevblog

      http://www.eevblog.com/forum/suggest...or-your-phone/

      http://www.eevblog.com/forum/testgear/mooshimeter/

      http://www.eevblog.com/forum/testgea...more-a-gadget/

      http://www.eevblog.com/forum/crowd-f...ne-multimetre/
      --- begin sig file ---

      If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

      We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

      Please do not post inline and offsite as they slow down the loading of pages.

      --- end sig file ---

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Fritter
          Your most useful test equipment.
          by Fritter
          Hi All,
          For some background, I passed an OND in electronics in the 80's. Life took me elsewhere, and I've finally got around to using it practically. My interest is in vintage electronics.
          My question is, other than a multimeter, what is the most used and useful piece of test equipment ?
          Thanks !
          06-07-2023, 12:23 PM
        • chth96
          How Can I test PWM DM0365R?
          by chth96
          Hello
          I have power adaptor(220V/input, 12V 1.2A/output) which has symptom of fluctuating output DC voltage between 11.5V-12.2V.
          So I opened its plastic case and when switched it on, I heard constant tik tik sound from inside its PCB.
          I measured DC voltage between negative and positive pin of the largest capacitor(400v 10uf) and it was measured contant 300V.
          I also measured ESR value of all capacitors and I noticed that one of capacitor(KMG 16v 470uf), which located in the secondary side, have high ESR value(10 ohm),So I replaced it with same specification NXH capacitor....
          06-18-2025, 04:14 PM
        • khelane
          test active pfc power with lamp test
          by khelane
          Hello
          I have a big problem and that is that in some cases when repairing active pfc power supplies I cannot work with a test lamp. I can only get help with 5 volts standby and for starting and starting I have to work without a lamp and this way there is a possibility of parts exploding and other parts being added.
          Sometimes with a multimeter test the problems can be reduced to some extent, but I had several cases that had to be tested on and online and recently two varistors exploded. They had terrible resistance because the power supplies were over 800 watts.
          Is there a way...
          06-03-2025, 01:00 AM
        • chronic519
          Mats / mods: detected and repaired GPU fault. Cant seem to test after!
          by chronic519
          Hello.

          GPU came in, green lines. Spent lots of time using to get the Mats / mods drive working (found on youtube).
          Found issue with a RAM block
          Replaced, green lines gone.
          Trying to test again, assuming getting the false positive. Originally had over 1K on a single bank. Now getting tosses low between banks.
          Used a good card to test and same results low errors 32+.

          I am just search for some form of command to do a full test on the GPU.
          I just ran the mats command with my good GPU and passed after roughly 40 min.
          The repaired one, ran...
          05-20-2025, 07:56 PM
        • alltvrepairs
          Lg TCon test pins for screen test
          by alltvrepairs
          Hi,
          i have a 65 Panasonic TX-65HX710E using vestel 17MB170 main and Lg tcon.

          Few drops of water fell probably near COF and have no display. Tried removing tabs but no.part of display present as if tcon fuse open. However 12v is present and tcon can be felt warm enough that supplies are present. Backlight and sound ok.

          Anyone knows if this TCon 6870c-0805A has any special test pins for rgb test?

          Appreciate your help....
          2 Photos
          06-13-2025, 06:33 AM
        • Loading...
        • No more items.
        Working...