Help! My Panasonic TC-P65ZT60 wont turn on!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • thelouisman
    New Member
    • Jul 2016
    • 7
    • USA

    #1

    Help! My Panasonic TC-P65ZT60 wont turn on!

    Hi all! New to badcaps forum...but I have a big problem that I'm hoping all of you can help me troubleshoot figure out.

    I had a really bad storm here in WV area this week. The power never went out, but our house shook every time there was thunder/lightning. Storm was on top of us. it was bad.

    all my components plugged into my surge protector survived - save one. my Panasonic 65 inch ZT plasma will not power on.

    The red light on front of tv isn't even visible - even after unplugging tv and plugging back in, trying a different outlet, etc.

    i am so pissed. i love this tv.

    i have squaretrade for this set - they ordered a new main board and power board for it, but they called me a day later and said the parts for this are on extended backorder, which they won't allow a claim to stay on extended backorder for parts. of course, they offered a replacement, which i don't want, and of course, the set they offered was a vizio 4k led set, which I really dont want.

    The ZT plasma is a one of a kind. I don't want to lose it.

    so, no red light at all on front of tv set. The tv won't power on/does nothing at all when you press power button.

    Does that sound like the main board to you (the "A" board the main board I believe)? or is the power supply board? Or both?

    if so, any idea where i can get one (the main board)? i have searched online but have been unsuccessful so far.

    any help you could provide would be most appreciated. sick to my stomach over this. first step is to identify what part went wrong since squaretrade wont send anyone out to examine the set since they say the parts are on extended backorder.

    thank you all!
  • Moreno83
    Badcaps Legend
    • Jun 2014
    • 2008
    • The Netherlands

    #2
    Re: Help! My Panasonic TC-P65ZT60 wont turn on!

    Sounds like a bad mainboard. Could you please take some pictures of the backside with all the boards and take a picture of the mainboard?
    I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

    Comment

    • tw2005
      Badcaps Legend
      • Oct 2011
      • 6457
      • Australia

      #3
      Re: Help! My Panasonic TC-P65ZT60 wont turn on!

      P and sub P boards you can get from Shopjimmy. A little over $100 for both. I would not get these and hope, I'd see what can be done with the main as I think that could be the culprit

      Contact encompass and see if these are available as they show ship date 09 Aug2016, that may be just an automated estimate.

      https://www.encompassparts.com/item/...UUUUS/Pc_Board

      Looking at the prices with labour it could be $700 or more.

      If there is no way of getting new, try contacting

      http://www.ptselectronicsinc.com/

      They do rebuilds but do not list these so they may not have any way to test, worth a go.

      If they can, then I would seek a payout , keep it, and try replacing the boards yourself which is easy enough.

      I would see if they will let you keep it anyway. get a replacement and hope an opportunity arises for some parts but I would presume these models are rare.

      Don't think a VIVO would be a satifactory brand though. I'd want at least the same brand, maybe a main stream brand at least.
      Last edited by tw2005; 07-30-2016, 01:31 AM.

      Comment

      • joshnz
        Badcaps Veteran
        • Feb 2011
        • 969
        • New Zealand

        #4
        Re: Help! My Panasonic TC-P65ZT60 wont turn on!

        I would test the power supply first by checking the standby supply is working
        My pc
        CPU : AMD PHENOM II x4 @ 3.5Ghz
        MB : ASUS M4A89TD PRO USB3
        RAM : Kingston ValueRAM 16gb DDR3
        PSU : Cooler Master 850W Silent Pro
        GPU : ATI Radeon HD 6850

        Comment

        • Moreno83
          Badcaps Legend
          • Jun 2014
          • 2008
          • The Netherlands

          #5
          Re: Help! My Panasonic TC-P65ZT60 wont turn on!

          I have not looked at the schematics yet but the mainboard on the 50VT50 turns on the 5stby on the powersupply so dont get fooled by that.

          Whats the partnumber? I might know a place to get them.

          I can get you a brand new TXN-A1APVE TNPH1043 for 100 euro. Thats about $110.
          I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

          Comment

          • thelouisman
            New Member
            • Jul 2016
            • 7
            • USA

            #6
            Re: Help! My Panasonic TC-P65ZT60 wont turn on!

            Originally posted by Moreno83
            Sounds like a bad mainboard. Could you please take some pictures of the backside with all the boards and take a picture of the mainboard?
            i would love to, but i canrt get tv off the wall mount on my own,. the set is 120 pounds and huge. i will take pics when i can recruit help, which might be a few days

            Comment

            • thelouisman
              New Member
              • Jul 2016
              • 7
              • USA

              #7
              Re: Help! My Panasonic TC-P65ZT60 wont turn on!

              Originally posted by Moreno83
              I have not looked at the schematics yet but the mainboard on the 50VT50 turns on the 5stby on the powersupply so dont get fooled by that.

              Whats the partnumber? I might know a place to get them.

              I can get you a brand new TXN-A1APVE TNPH1043 for 100 euro. Thats about $110.

              i appreciate the offer, but the main board A part number in the U.S. for this Panny is TXN/A1UUUUS (TNPH1043UE).

              you're quoting me the euro version of this part. aren't there going to be differences operationally when you stick the euro board into the U.S. version of the tv set?

              like i said, part number i THINK i need is Panasonic TXN/A1UUUUS (TNPH1043UE) A Board for TC-P60ZT60

              Comment

              • thelouisman
                New Member
                • Jul 2016
                • 7
                • USA

                #8
                Re: Help! My Panasonic TC-P65ZT60 wont turn on!

                Originally posted by joshnz
                I would test the power supply first by checking the standby supply is working
                how would i do this? apologies, i genuinely don't know.

                Comment

                • Moreno83
                  Badcaps Legend
                  • Jun 2014
                  • 2008
                  • The Netherlands

                  #9
                  Re: Help! My Panasonic TC-P65ZT60 wont turn on!

                  I just got it from a dutch site where you can order the part. Its not my board haha.

                  The tv would work i think , might just be firmware related. I got a UK mainboard in my VT50.
                  I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

                  Comment

                  • thelouisman
                    New Member
                    • Jul 2016
                    • 7
                    • USA

                    #10
                    Re: Help! My Panasonic TC-P65ZT60 wont turn on!

                    Originally posted by Moreno83
                    I just got it from a dutch site where you can order the part. Its not my board haha.

                    The tv would work i think , might just be firmware related. I got a UK mainboard in my VT50.
                    i understand. i appreciate the help. i just want to buy the main board I KNOW will work for this, the US version.

                    anyone else able to help out here? power supply probably not culprit since i dont even have the red light on the front of the set?

                    Comment

                    • tw2005
                      Badcaps Legend
                      • Oct 2011
                      • 6457
                      • Australia

                      #11
                      Re: Help! My Panasonic TC-P65ZT60 wont turn on!

                      Originally posted by thelouisman
                      i understand. i appreciate the help. i just want to buy the main board I KNOW will work for this, the US version.

                      anyone else able to help out here? power supply probably not culprit since i dont even have the red light on the front of the set?
                      did you read my post #3?

                      Comment

                      • Moreno83
                        Badcaps Legend
                        • Jun 2014
                        • 2008
                        • The Netherlands

                        #12
                        Re: Help! My Panasonic TC-P65ZT60 wont turn on!

                        I found the service manual for the 65VT60 , similar as the ZT.

                        Its acting the same as on my VT50.
                        There must be 5V on the power supply , check if you have 1 pin on P6 that has 5V. I'ts probably the only thing you are going to measure on P6. I think its pin 6 on P6 , labeled as EV5V.

                        5V is going to the mainboard to IC5000 which turns on the 5VSTBY on the power supply.

                        Can you check that? Could you also take some pictures of the boards? We don't see these tv's on this forum.....
                        I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

                        Comment

                        • Moreno83
                          Badcaps Legend
                          • Jun 2014
                          • 2008
                          • The Netherlands

                          #13
                          Re: Help! My Panasonic TC-P65ZT60 wont turn on!

                          On that IC5000 you must measure the EV5V and if that ic works you will also measure 3.3v. Im sure you won't measure 3.3v as its turning on the front panel led.

                          I hope you got 5V on P6.
                          I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

                          Comment

                          • thelouisman
                            New Member
                            • Jul 2016
                            • 7
                            • USA

                            #14
                            Re: Help! My Panasonic TC-P65ZT60 wont turn on!

                            Originally posted by tw2005
                            did you read my post #3?
                            i did. thank you for the suggestions. i have contacted both; no responses yet due to the weekend.

                            i think i'm going to ignore all boards excelt for the main board and possibly the power supply for now. if thise dont work, once i ever find a main board, then i will look at the other boards.

                            Comment

                            • djw43
                              Senior Member
                              • Mar 2015
                              • 95
                              • United States

                              #15
                              Re: Help! My Panasonic TC-P65ZT60 wont turn on!

                              Hi, I am jumping in this thread having seen this TV.
                              As the OP noted, the TV was zapped by a power surge, the A board was fried.
                              He replaced the A board with the board for the p65vt60 and spliced the fan connections into the 6 pin jack. The fans work, picture is good, but there is no audio. I updated the software, and still no audio, the audio select is set to auto. Could there be another setting I am missing? Would anyone know if the card for the VT (TNPH1043UC) can be compatible with the ZT audio system. The correct card for the 65ZT is TNPH1043UE.
                              Thanks very much for any details, the ZT card is nearly impossible to find.

                              Comment

                              • Moreno83
                                Badcaps Legend
                                • Jun 2014
                                • 2008
                                • The Netherlands

                                #16
                                Re: Help! My Panasonic TC-P65ZT60 wont turn on!

                                Do you get sound from the headphone input? Not sure if this board has one.....
                                I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

                                Comment

                                • djw43
                                  Senior Member
                                  • Mar 2015
                                  • 95
                                  • United States

                                  #17
                                  Re: Help! My Panasonic TC-P65ZT60 wont turn on!

                                  Originally posted by Moreno83
                                  I just got it from a dutch site where you can order the part. Its not my board haha.

                                  The tv would work i think , might just be firmware related. I got a UK mainboard in my VT50.
                                  Hi Moreno83
                                  do you have any Euro or UK links for TNPH1043UE TXN/A1UUUUS
                                  for TC_P65ZT60?
                                  thanks!

                                  Comment

                                  • Moreno83
                                    Badcaps Legend
                                    • Jun 2014
                                    • 2008
                                    • The Netherlands

                                    #18
                                    Re: Help! My Panasonic TC-P65ZT60 wont turn on!

                                    Here you go! It's from a friend of mine , he has 2. Suffix sticker might be different.

                                    https://www.tvonderdelen.nl/detail.p...3%20&language=
                                    I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

                                    Comment

                                    • djw43
                                      Senior Member
                                      • Mar 2015
                                      • 95
                                      • United States

                                      #19
                                      Re: Help! My Panasonic TC-P65ZT60 wont turn on!

                                      Originally posted by Moreno83
                                      Do you get sound from the headphone input? Not sure if this board has one.....
                                      Hi
                                      I did not have time for any troubleshooting, at this point I only know there is no audio on the e-help self test page of the flowers.

                                      Thanks for the fast response!

                                      Comment

                                      • Moreno83
                                        Badcaps Legend
                                        • Jun 2014
                                        • 2008
                                        • The Netherlands

                                        #20
                                        Re: Help! My Panasonic TC-P65ZT60 wont turn on!

                                        Originally posted by djw43
                                        Hi
                                        I did not have time for any troubleshooting, at this point I only know there is no audio on the e-help self test page of the flowers.

                                        Thanks for the fast response!

                                        Haha your welcome , i am really jealous! Im still searching for a defective VT/ZT60 to replace my VT50.
                                        Do you use the swipe function on this model? And how does it work?
                                        I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

                                        Comment

                                        Related Topics

                                        Collapse

                                        • Tynan Dill
                                          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                                          by Tynan Dill
                                          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                                          Upon bringing it home and plugging it up, it showed a standby light.

                                          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                                          The screen seems to blackout and stay black, but with a flashlight I can see the display.

                                          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                                          Assuming...
                                          11-22-2024, 01:46 PM
                                        • m1ch43lzm
                                          HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                                          by m1ch43lzm
                                          Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                                          Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                                          05-12-2025, 08:37 PM
                                        • sam_sam_sam
                                          Panasonic switching power supply daughter board has two 27uf @ 50 volt capacitors which I do not keep in stock
                                          by sam_sam_sam
                                          I did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow

                                          This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board

                                          After all of...
                                          07-13-2024, 08:14 PM
                                        • canadaboy25
                                          Panasonic TC-P54VT25 No image. A or D board?
                                          by canadaboy25
                                          I have a Panasonic TC-P54VT25 that will power on and prime the display but there is no image at all.

                                          The panel is primed as there is a slight glow from the entire panel. This means the problem should be logic related. The service manual also confirms this and recommends replacing the A or the D board.

                                          I have tried to get the TV to display the test sequence but I have been unable to and I don't even know if this TV has a test sequence or not. I tried following tom66's instructions in post #3 on this thread https://www.badcaps.net/forum/showthread.php?t=26790. There was...
                                          01-17-2021, 01:06 AM
                                        • stecos
                                          Panasonic Plasma main board repair (ST30 GT30 VT30 ST50 GT50 VT50),LED with 3 blincks
                                          by stecos
                                          Hi everyone!
                                          I happened several times, in the search for help from the web, to consult this very interesting forum.
                                          So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.

                                          Having said that I come to the gist of my post on the forum as the title suggests.
                                          For my passion for technology I'm now collecting several...
                                          11-28-2022, 11:39 AM
                                        • Loading...
                                        • No more items.
                                        Working...