LG PDP60R40000 No Signs Of Life

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Todd1
    New Member
    • Apr 2016
    • 4
    • Australia

    #1

    LG PDP60R40000 No Signs Of Life

    Hi, I have an LG that has no signs of life on the outside, no power LED, video, or sound. All output voltages on the power board EAX64276701 tested normal and per spec. The mainboard EAX64280504 has a constant red light at part LD500.

    The Tcon EBR73749601 has a flashing green light at D101 with repeated cycles of one long, one short.

    I have not sure about which direction to take troubleshooting this issue and any help would be appreciated. Thank you
  • tw2005
    Badcaps Legend
    • Oct 2011
    • 6458
    • Australia

    #2
    Re: LG PDP60R40000 No Signs Of Life

    don't know a lot about the LGs but on the logic control board ther are 2 pads marked auto-gen.

    I believe you can jumper those together, disconnect the LVDS ribbon from the main board, disconnect the power lead from the main board to the psu. plug it in and turn on at the wall it should auto turn on and then display a sequence of test patterns.

    Also the model , probably 60PAxxxx,

    Comment

    • Todd1
      New Member
      • Apr 2016
      • 4
      • Australia

      #3
      Re: LG PDP60R40000 No Signs Of Life

      Ok found it. Just not sure exactly what to jump, the orange circles or the resistors together?

      Comment

      • tw2005
        Badcaps Legend
        • Oct 2011
        • 6458
        • Australia

        #4
        Re: LG PDP60R40000 No Signs Of Life

        Originally posted by Todd1
        Ok found it. Just not sure exactly what to jump, the orange circles or the resistors together?
        The orange circles which should be copper pads

        Comment

        • Todd1
          New Member
          • Apr 2016
          • 4
          • Australia

          #5
          Re: LG PDP60R40000 No Signs Of Life

          Cheers, not too familiar with the terminologies haha. No change when I bridge the connection with a screwdriver.

          Comment

          • tw2005
            Badcaps Legend
            • Oct 2011
            • 6458
            • Australia

            #6
            Re: LG PDP60R40000 No Signs Of Life

            Originally posted by Todd1
            Cheers, not too familiar with the terminologies haha. No change when I bridge the connection with a screwdriver.
            did you follow all the steps? Can you be sure a screwdriver made contact? If you have a soldering iron I'd solder a wire link but if you're sure you did everything right then that would suggest it's in protection due to a failed driver board or buffers.

            Only thing to suggest would be to use a multimeter and go looking for shorted out transistors or shorted buffer boards. The transistors to check woulfd be the heatsinked items with positions labelled Qxxx, Dxxx are diodes.

            I'd start with the ysus board

            Comment

            • ReeceyBurger123
              Never Give Up !
              • May 2014
              • 7325
              • Britain

              #7
              Re: LG PDP60R40000 No Signs Of Life

              Images of the back of the set ?
              Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

              https://www.facebook.com/Telford-Tel...7894576335359/

              Comment

              Related Topics

              Collapse

              • KYBOSH
                Trying to Save - Samsung 65" The Frame (QN65LS03B) with no signs of life (One Connect Box)
                by KYBOSH
                I picked this one up today.
                Previous owner says no signs of life.
                TV looks immaculate and its a 2022 model year so I thought maybe the one connect cable was damaged.
                Got it home and put it on the Kill-A-Watt power meter and it was completely dead.

                The TV model is QN65LS03BAFXZA - version: CB06
                The One Connect Box BN44-01066D / BN96-54788Q / BN39-02470A.

                I immediately remembered EazyBone's Samsung The Frame TV no power....One Connect thread and am preparing myself to tear the One Connect open and hunt for dead parts.

                Will keep you all...
                04-05-2025, 08:32 PM
              • someonenotyou
                Dell Vostro 3501 - no signs of life after BIOS read
                by someonenotyou
                Hi.

                I have a laptop Dell Vostro 3501 which did not POST. When connected to power supply and turn it on, the keyboard backlight would turn on but nothing else. Sometimes there was 1 BEEP code indicating problems with BIOS.

                Then I disassembled it to read the BIOS chips. It had 2 - 64mbit and 128mbit. I connected CH341A (with 3.3v mod) to both of the chips (still soldered on main board) and read them.

                After I reassembled laptop back and tried to turn it on. Now there is no sign of life. Not even keyboard backlight.

                Then I took the motherboard out...
                01-27-2025, 05:15 AM
              • tranquility
                HP EliteBook 850 G5 without signs of life
                by tranquility
                hello, i have a problem with HP EliteBook 850 G5
                shoring no signs of life. led near charging port and on/off button are off.
                board it taking just a few mA..i think it was 10mA

                i measured some things but i don´t find anything

                the ACOK ? pin 24 FRWPG (pin 24) am ISL9538h is low with 0V
                but i dont know why

                i cant really understand what the mosfets in the pictures are doing for crazy things.
                i measuered voltage on coils....but now on mosfets near the coils too and they all had more than 10v i think one was there with 8v or something....so...
                12-02-2024, 05:57 AM
              • KYBOSH
                Trying to Save - Samsung UN40MU6300 - No Signs of Life
                by KYBOSH
                Picked this one up today.

                No signs of life whatsoever. No red led light from the IR module.

                Disconnected the mainboard to see if PSU was working and it was (LED backlights lit up).

                Checked the power button for continuity when buttons were pressed and I got readings.
                Disconnected various components (speaker, wifi module) with no difference.

                Checked mainboard's fuses (found 3) and they were all good.
                I looked on shopjimmy to see what components I may have been missing and I saw that they were selling EEPROMs.

                Then it dawned...
                10-12-2024, 11:20 PM
              • ongobongo
                Asus Rog Strix starts but no screen or other signs of life
                by ongobongo
                Hi Guys,
                I'm trying to repair this Asus ROG Strix notebook for a longer while now.
                Mainboard is G531GW rev. r1.6
                When attaching power notebook straight up turns on but no picture or similar signs of life. Voltages are all there (VCCCORE, VCCSA, NVVDD, 1.05V, 1.2V, 5V, 3V, 12V …. Only VCCGT is missing, but that is ok as far as I read), no obvious shorts on any rails. CPU gets hot quickly without heatsink, GPU gets moderately warm and PCH gets warm as well. EC should be good: power button responds to a long press and after a while the CPU fan kicks in.
                What I have found out...
                08-06-2024, 01:13 PM
              • Loading...
              • No more items.
              Working...