Panasonic TX- P42G10E

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • realfoxx
    New Member
    • Apr 2016
    • 9
    • Serbia
    #1

    Panasonic TX- P42G10E

    Hello to all
    I have Pansonic plasma TX- P42G10E since october 2009. Since couple of weks
    I noted strange changes in picture and sam flickering on motion especially on movie TV channels. It seems the refresh rate is not 100hz,something like that.
    Also there are problems in some background like rings around or twirl, especially when is flashlight on scene.
    There are some pictures of problems:
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Tags: None
    • ReeceyBurger123
      Never Give Up !
      • May 2014
      • 7325
      • Britain
      #2
      Re: Panasonic TX- P42G10E

      I have had some issues out of the mainboards on these sets. This uses the TNPH-0784 board which is prone to developing issues with the Bga solder breaking on the processor Ic's can cause symptoms like this or 14 blink error. Will link my thread if you want. Have you tried resetting the Tv ?
      Last edited by ReeceyBurger123; 04-14-2016, 04:59 PM.
      Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

      https://www.facebook.com/Telford-Tel...7894576335359/

        Comment

        • realfoxx
          New Member
          • Apr 2016
          • 9
          • Serbia
          #3
          Re: Panasonic TX- P42G10E

          Thanks for the quick answer. Yes, I was resseted and install a new firmware but the problems are there, all is the same.

            Comment

            • ReeceyBurger123
              Never Give Up !
              • May 2014
              • 7325
              • Britain
              #4
              Re: Panasonic TX- P42G10E

              Hmm maybe take the back off and push on the Bga Ic's see if it improves. You cant really run test patterns on these either as the control board is built into the mainboard so it might still be distorted. Link to my thread:

              https://www.badcaps.net/forum/showthread.php?t=49721
              Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

              https://www.facebook.com/Telford-Tel...7894576335359/

                Comment

                • realfoxx
                  New Member
                  • Apr 2016
                  • 9
                  • Serbia
                  #5
                  Re: Panasonic TX- P42G10E

                  Thanks for link to your thread

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • BigPete
                      Panasonic Heatpump Dryer Repair
                      by BigPete
                      I picked up a Panasonic NH-P70G2, though it would apply to the NH-P80G2, NH-P70G1 and NH-P80G1 models as well, as maybe some other models. This one was coming up with a H86 error. After lots of testing and googling it was an error with one of the thermistors in the condenser area.
                      The attached French service manuals is incorrect, TH11 is gray and is a 95k thermistor and TH12 is black and is a 35k thermistor.
                      In my case TH12 was bad. I was able to get a 35k thermistor on AliExpress. It's 6mm in diameter.
                      Unfortunately the whole machine has to come apart to fix it.
                      I have...
                      11-01-2025, 06:40 PM
                    • Andre Gilbert
                      Panasonic TC-P55ST50 8 blinks then no blinks
                      by Andre Gilbert
                      Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing herešŸ¤”?
                      Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting šŸ˜‚.

                      TV Model: Panasonic TC-P55ST50
                      ...
                      1 Photo
                      11-20-2024, 08:52 PM
                    • jean luc ferre
                      laptop hp g72 b52sf screen problems
                      by jean luc ferre
                      Hello,
                      on this laptop hp g72 b52sf i have screen problems as you can see with the photo joined in attachments.
                      the used graphic card is "intel hd graphics" and the id of the integrated screen is : "monitor/SEC3354".
                      i verified the driver of the pƩripherals and they are ok. i verified the definition and settings of the graphic card and of the screen : definition 1600x900 and refreshment frequency :60hz. (they are the sames for the graphic card and the screen).
                      i don't understand the reasons of the white stripe at the bottom of the screen below the task...
                      06-07-2025, 03:27 PM
                    • Hondaman
                      USB problems?
                      by Hondaman
                      Recently I discovered my SSD died (OCZ/Toshiba 240 GB). It was in a USB enclosure, attached to the Linksys WRT-AC1200 router. Since then I removed the USB enclosure and attached it to my Win7 PC (AMD 8150 CPU, 970 chipset, 64 GB RAM). I also gathered one or two other USB enclosures to figure out what is going on.

                      (I suspect that I lost quite a few MP3 and FLAC files I recently ripped from my audio CDs, I think I lost very little un-replaceable stuff.)

                      I think it is IMPOSSIBLE for Win7 to have any problems with a USB enclosure as long as Win7 knows how to speak to the...
                      08-12-2024, 03:26 PM
                    • stecos
                      Panasonic Plasma main board repair (ST30 GT30 VT30 ST50 GT50 VT50),LED with 3 blincks
                      by stecos
                      Hi everyone!
                      I happened several times, in the search for help from the web, to consult this very interesting forum.
                      So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.

                      Having said that I come to the gist of my post on the forum as the title suggests.
                      For my passion for technology I'm now collecting several...
                      11-28-2022, 11:39 AM
                    • Loading...
                    • No more items.
                    Working...