Lg 50pc3d psu

[Malachi]

I have this psu that has bulging leaking capacitors.
I went to mouser to look some up to purchase.
They are 10v 3300uf. I selected the Panasonic brand because I read in the forum here that they are a good brand, but there is more than one type.
I don't know which kind it needs.
Could I get some advice?

I thought at one time I had seen a sticky about recommended brands but can't find it.
I found the sticky and I see rubycon is the top one. the caps are about 24mm tall and about 12 mm in diameter.
Would this work? CAP ALUM 3300UF 20% 10V RADIAL
The difference seems to be something called ripple current and impedance.

[RCA2000]

Re: Lg 50pc3d psu

Well I would get a 16V 105C cap to replace the old ones. Should NOT be trouble fitting them


DO NOT--get 85C caps...they DO NOT last in flat sats..or for that matter standard CRT sets too well either...

[ReeceyBurger123]

Re: Lg 50pc3d psu

Why go 16v ? The old ones on them are a common fault to fail which is not due to them being 10v rated. You should use the Panasonic FR series which will work great on that Psu. Replace any other that cap that is branded by Samwha with the Wb or Wl series.

[Malachi]

Re: Lg 50pc3d psu

I don't think I can do it myself. Someone offered to do it for $50 if I supply the parts.
Panasonic fr for the 10v 3300uf and Panasonic Wb or Wi series for all the others?