Panasonic TC-P42S30 - Would someone mind helping me confirm SN?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Malachi
    Badcaps Legend
    • Dec 2015
    • 1077
    • Usa

    #21
    Re: Panasonic TC-P42S30 - Would someone mind helping me confirm SN?

    Ok, that's not who I used. Thanks.

    Comment

    • tw2005
      Badcaps Legend
      • Oct 2011
      • 6458
      • Australia

      #22
      Re: Panasonic TC-P42S30 - Would someone mind helping me confirm SN?

      Originally posted by RCA2000
      TW_-you seem to be very knowledgeable on PDP sets...So is it NOT advisable to buy boards form a broken screen plasma set ?

      WIll it hurt MORE than the Y-buffers--I KNOW from the sound of a busted panel--is sounds like it is HARD on them...the loud "buzz" they make... WIll the Y-sustains (or sc board) get whacked ALSO? How about the Z_(or called SS or X in some sets ) ALSO get killed in a busted panel?
      Hard to generalise so I can only comment on experience and that being predominantly Panny PDP.

      Buying any board used is a risk in the beginning for it means the TV is unsalvageable in the first place and that generally would be bad panel.

      I've purchased 2 complete board sets of the 2010 FHD series, both cracked panels so you know in that condition they were powered and that generally means the panel shorts.

      Both had shorted Sd boards but all else were good.

      Damaged in transit new TVs are going to be good(never powered)

      Defective panel but running shpuld be ok

      And then you have the rest from junked TVs and unless whoever sells them knows what they're doing and invests time checking, it will be a gamble .

      As a rule I make sure i use paypal and if DOA contact seller, if that goes belly up, paypal claim.

      have not lost a penny yet.

      Comment

      • 850csi
        Member
        • Jan 2016
        • 23
        • USA

        #23
        Re: Panasonic TC-P42S30 - Would someone mind helping me confirm SN?

        Originally posted by Malachi
        Ok, that's not who I used. Thanks.
        No problem. My big mistake was not using by credit card to pay for it. So no fraud protection.

        Still not getting any reply from this great business, so I'm back to searching on ebay for another SN board and hoping it doesn't arrive "pre-shorted"!

        Comment

        • syaoran123
          Senior Member
          • Jun 2014
          • 178
          • Australia

          #24
          Re: Panasonic TC-P42S30 - Would someone mind helping me confirm SN?

          Happened to me also when I bought a cracked screen TV, moved the SN across and then 7 blinks still. Better to repair your own SN board, change the screws and add heatsinks to prevent from happening again.

          The SN board from the cracked screen TV had a short circuit across C482 (one of the long capacitors). There is no repair kit for this kind of repair.

          Comment

          • saxmonster
            New Member
            • Apr 2016
            • 5
            • USA

            #25
            Re: Panasonic TC-P42S30 - Would someone mind helping me confirm SN?

            I received an SN board off of ebay from a "non working tv with a cracked screened" and it did not work. Got a full refund and I sent it to

            PTS Electronics, Inc.
            http://www.ptselectronicsinc.com/

            they said they could repair it even if it is the IC buffers. I had 6 blinking lights. So we shall see. They just got it yesterday so they should start working on it soon. Will post back here with the details if anything goes wrong. I found them via this site so fingers crossed it works out.

            -Scott

            Comment

            • saxmonster
              New Member
              • Apr 2016
              • 5
              • USA

              #26
              Re: Panasonic TC-P42S30 - Would someone mind helping me confirm SN?

              My original board was already worked on by my brother inlaw so thats why I didn't send that in. I knew the buffers where bad on that one, cause he changed the parts but when he started the tv up there were lines and he tried to fix the ribbon cables / lines on tv with it on. A big no no, hahahah

              Comment

              • flocko
                Badcaps Legend
                • Nov 2012
                • 1121
                • uk

                #27
                Re: Panasonic TC-P42S30 - Would someone mind helping me confirm SN?

                If the panel ribbons were adjusted with the set powered on, the PDP will almost certainly be damaged and leave your set beyond repair

                Comment

                • saxmonster
                  New Member
                  • Apr 2016
                  • 5
                  • USA

                  #28
                  Re: Panasonic TC-P42S30 - Would someone mind helping me confirm SN?

                  what is the PDP, The display panel? I guess its too late now that they received the board. If the SN board is unrepairable I will just take the tv to the recycle center now knowing this little fact.

                  Comment

                  • saxmonster
                    New Member
                    • Apr 2016
                    • 5
                    • USA

                    #29
                    Re: Panasonic TC-P42S30 - Would someone mind helping me confirm SN?

                    Well I got my SN board back and all is good. It's been on for a couple of hours now and working perfect!!!! I highly recommend PTS electronics inc to fix these boards. Cost $75 to fix it and a 6month warranty too!!!!!. I think I will put my non working one on ebay as is and try to get some of my shipping money back from when i sent to PTS. Don't use USPS box to ship it, it was so expensive around $18m highway rip off. Also PTS has free shipping through UPS back to you. Sent on friday got it on monday. Great company.

                    -Scott

                    Comment

                    • tw2005
                      Badcaps Legend
                      • Oct 2011
                      • 6458
                      • Australia

                      #30
                      Re: Panasonic TC-P42S30 - Would someone mind helping me confirm SN?

                      Originally posted by saxmonster
                      Well I got my SN board back and all is good. It's been on for a couple of hours now and working perfect!!!! I highly recommend PTS electronics inc to fix these boards. Cost $75 to fix it and a 6month warranty too!!!!!. I think I will put my non working one on ebay as is and try to get some of my shipping money back from when i sent to PTS. Don't use USPS box to ship it, it was so expensive around $18m highway rip off. Also PTS has free shipping through UPS back to you. Sent on friday got it on monday. Great company.

                      -Scott
                      Sounds good. If you consider what you'd have to pay a tech to diagnose, remove, install and warrant the repair, less than a $100 is still good or alternatively the price of a new TV.

                      Given how rare these would be , I've seen broken boards around $20-30 , would suit those who repair them for business.

                      Comment

                      • Electronic Handyman
                        Senior Member
                        • Apr 2016
                        • 58
                        • Canada

                        #31
                        Re: Panasonic TC-P42S30 - Would someone mind helping me confirm SN?

                        I've used boards from busted screens like buffer boards y-sustain boards and other boards, it's only happened I believe once that a board didn't work.In my opinion if you consider what ppl are spending on these type of boards especially y-sustain boards and buffer boards buying a set with a busted panel usually is a lot cheaper.
                        O ne post mentions that some repair service on ebay ripped them off for their board as long as you don't wait longer then 45 days to complain to ebay and paypal usually you can get your money back but not sure how they handle property theft.I'd think that thy'd compare the value of a new functional board via ebay sellers etc to figure out what a non-functioning board would be worth. Note that if the ebayer doesn't have the funds in their account or get any cash in it ,the purchaser maybe out of pocket.You should at least put in a complaint and comments to try and prevent others from getting ripped off.

                        Comment

                        • 850csi
                          Member
                          • Jan 2016
                          • 23
                          • USA

                          #32
                          Re: Panasonic TC-P42S30 - Would someone mind helping me confirm SN?

                          Originally posted by Electronic Handyman
                          O ne post mentions that some repair service on ebay ripped them off for their board as long as you don't wait longer then 45 days to complain to ebay and paypal usually you can get your money back but not sure how they handle property theft.I'd think that thy'd compare the value of a new functional board via ebay sellers etc to figure out what a non-functioning board would be worth. Note that if the ebayer doesn't have the funds in their account or get any cash in it ,the purchaser maybe out of pocket.You should at least put in a complaint and comments to try and prevent others from getting ripped off.

                          Ebay refused to do anything claiming that repair services aren't covered under any sort of buyer protection. Eventually they caught on to the scam and deactivated the seller's account but not before at least 4-5 of us got screwed.

                          I'm pursuing it now through my bank. Problem is even if I get the money back I still don't have a board. Anyone have a busted board they want to part with?

                          If only I had not been an idiot and just gone through PTS.
                          Last edited by 850csi; 05-10-2016, 01:55 PM.

                          Comment

                          • Malachi
                            Badcaps Legend
                            • Dec 2015
                            • 1077
                            • Usa

                            #33
                            Re: Panasonic TC-P42S30 - Would someone mind helping me confirm SN?

                            Originally posted by 850csi
                            Ebay refused to do anything claiming that repair services aren't covered under any sort of buyer protection. Eventually they caught on to the scam and deactivated the seller's account but not before at least 4-5 of us got screwed.

                            I'm pursuing it now through my bank. Problem is even if I get the money back I still don't have a board. Anyone have a busted board they want to part with?

                            If only I had not been an idiot and just gone through PTS.
                            I may have one soon.

                            Comment

                            • 850csi
                              Member
                              • Jan 2016
                              • 23
                              • USA

                              #34
                              Re: Panasonic TC-P42S30 - Would someone mind helping me confirm SN?

                              Managed to get my hands on a new board that was purportedly a Panasonic repair... Fingers crossed. Haven't tried putting it in yet but there's no continuity across SN2 pins so that's a start!

                              I'm still terrified that there's something else going on with my TV (or with my installation) that will short a perfectly good SN board. As in here, where apparently SS was causing SN to fail: https://www.badcaps.net/forum/showthread.php?t=23815

                              An SS board is only $20 - worth getting a new one before testing the new SN board and possibly risking a short? I'm just not sure if last time out the board I used was fried when I got it or was shorted out inside my own TV.
                              Last edited by 850csi; 05-17-2016, 11:41 AM.

                              Comment

                              • 850csi
                                Member
                                • Jan 2016
                                • 23
                                • USA

                                #35
                                Re: Panasonic TC-P42S30 - Would someone mind helping me confirm SN?

                                Just to close the loop: I still have no idea if the SS board was actually at fault, but I replaced both the SN and SS boards and everything works great! So glad to have my tv back. Here's hoping it'll last another few years until OLEDs get reasonable.

                                Comment

                                Related Topics

                                Collapse

                                • Andre Gilbert
                                  Panasonic TC-P55ST50 8 blinks then no blinks
                                  by Andre Gilbert
                                  Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
                                  Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.

                                  TV Model: Panasonic TC-P55ST50
                                  ...
                                  11-20-2024, 08:52 PM
                                • AquaMan Ua
                                  Problem with PANASONIC CF53 laptop after changing BIOS settings
                                  by AquaMan Ua
                                  Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...
                                  05-17-2025, 09:40 AM
                                • stecos
                                  Panasonic Plasma main board repair (ST30 GT30 VT30 ST50 GT50 VT50),LED with 3 blincks
                                  by stecos
                                  Hi everyone!
                                  I happened several times, in the search for help from the web, to consult this very interesting forum.
                                  So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.

                                  Having said that I come to the gist of my post on the forum as the title suggests.
                                  For my passion for technology I'm now collecting several...
                                  11-28-2022, 11:39 AM
                                • H H
                                  3090 FE Part Confirm/Identification
                                  by H H
                                  Hello,

                                  I'm hoping someone could help me confirm if I have identified the following parts correctly.

                                  Apparently the DP cable became stuck inside the graphics card and was yanked out. This caused some sort of short which burned the DP contacts and blew some resistors and ferrite beads.

                                  The parts needing replacement are on the back of the board behind the HDMI input.

                                  I have identified the parts as the following:

                                  C6037: MLCC 0.1uf/16v(0402)x7R W05

                                  R6016: RES 499 OHM 1/16W (0402) 1%

                                  LB10911: Ferrite Bead (0402)...
                                  02-16-2025, 01:09 PM
                                • aa10aa10
                                  Panasonic Toughbook CF-33 mk1 BIOS repair
                                  by aa10aa10
                                  Good day,

                                  I have tried to remove BIOS supervisor password from Panasonic Toughbook CF-33 mk1. Model number CF-33AENABTG, unfortunately I don't have any other info.

                                  I read the BIOS using afuwin, edited it and tried to flash new edited BIOS using afuwin. Unsuccessfully. Afuwin showed "Error: Problem erasing flash." starting with 0x00040000 and stoped. Then I tried many other options to flash BIOS from Windows without any luck. Finally i rebooted the device - and no post. Afterwards I have read the corrupted bios chip (MX25L12873F) using EZP2010 programmer....
                                  01-21-2025, 06:13 AM
                                • Loading...
                                • No more items.
                                Working...