Hello,

I'm hoping someone could help me confirm if I have identified the following parts correctly.

Apparently the DP cable became stuck inside the graphics card and was yanked out. This caused some sort of short which burned the DP contacts and blew some resistors and ferrite beads.

The parts needing replacement are on the back of the board behind the HDMI input.

I have identified the parts as the following:

C6037: MLCC 0.1uf/16v(0402)x7R W05

R6016: RES 499 OHM 1/16W (0402) 1%

LB10911: Ferrite Bead (0402)...