Sceptre X332BV-HD, no backlight, I think it's an older model?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • googs
    Member
    • Jan 2016
    • 13
    • USA

    #1

    Sceptre X332BV-HD, no backlight, I think it's an older model?

    I have searched google, your forum, and three other sites for my exact TV. I have been unable to find it. I have seen other Sceptres with nearly the same model but different internals.

    My problem is that there is no back light. I can see the screen works when I shine a flashlight at it or through the back. Upon taking apart the TV it appears I only have a main board that I could maybe replace. There does not appear to be a specific back light/power board like others TVs appear to have.

    I will provide pictures of the components of my TV. I do not have the tools to check voltages like I have seen other posts referring to. Also I do not have the knowledge to do it if I even had the tools at this point.

    Any help would be appreciated.
    Attached Files
  • ReeceyBurger123
    Never Give Up !
    • May 2014
    • 7325
    • Britain

    #2
    Re: Sceptre X332BV-HD, no backlight, I think it's an older model?

    Probably a failed Led in my experience. You have a DMM ?
    Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

    https://www.facebook.com/Telford-Tel...7894576335359/

    Comment

    • googs
      Member
      • Jan 2016
      • 13
      • USA

      #3
      Re: Sceptre X332BV-HD, no backlight, I think it's an older model?

      I believe DMM is digital multi-meter? If so no I do not, but I could get one.

      Comment

      • CapLeaker
        Leaking Member
        • Dec 2014
        • 7973
        • Canada

        #4
        Re: Sceptre X332BV-HD, no backlight, I think it's an older model?

        yep, you need that.

        Comment

        • googs
          Member
          • Jan 2016
          • 13
          • USA

          #5
          Re: Sceptre X332BV-HD, no backlight, I think it's an older model?

          OK, I'll get one picked up in a week or so. Any suggestions on brand or any specific ones? Also where/what will I be testing on the TV with it? If you don't mind giving me a hint of sorts into what I should do once I get a DMM.

          Comment

          • vinceroger69
            Badcaps Legend
            • Mar 2012
            • 6714
            • uk

            #6
            Re: Sceptre X332BV-HD, no backlight, I think it's an older model?

            This is only a basic video but it shows you some of the things you might have to test on your tv.
            https://www.youtube.com/watch?v=JWWmz-dbakY

            Comment

            Related Topics

            Collapse

            • zaurus81
              Yashi All in one model AY62409 (Quantum S 24'') no image (backlight works)
              by zaurus81
              This chinese all in one computer gives an image when connected to an external vga monitor but only the backlight with integrated monitor (no image). Initially I thought it was an edid problem on the eeprom of the screen but then I saw that the monitor works correctly with another identical motherboard (model th410-d4, read by bios). Unfortunately the motherboard is chinese and has no brand or codes on the pcb. The format seems ITX. Nothing can be found online. The official yashi site provides drivers but not the bios. The electrical diagram is obviously unobtainable
              The board is equipped...
              01-16-2025, 03:54 AM
            • triplefour
              UN65TU700DF picture and sound but no backlight. BL tests ok but repl. PSU didnt fix!
              by triplefour
              this tv is throwing me for a loop. do samsung tvs no longer have the backlight self test feature built into the power supply?
              i tested the backlight with my LED tester and it lights up both strips. one of them reads 100v and the other reads 63.7v.
              unplugged mainboard from power supply but left backlight plugged in, and then plugged psu wall power in. expected to see backlights light up but see nothing.
              according to how ive diagnosed in the past, this would almost always be a bad power supply. replacement power supply was cheap like 20$ from ebay. but still i get not even...
              09-13-2023, 10:43 PM
            • spirittoo
              Sceptre 48" TV backlight LED`s
              by spirittoo
              Trying to fix a backlight problem with a Sceptre 48" TV.

              I found replacement strips with the same part number as the strips in the Sceptre, but the new backlight strips have 5 leds per strip and the ones in the tv has 6.

              So I decided to replace the leds instead. I found 3 bad ones. I had no problem removing the bad ones with a heat gun, they came right out. However the leds on the replacement strip would not come out with heat. I use my solder iron as well, they will not come off.

              Anyone know how I can remove those leds without damaging them?
              11-11-2023, 10:23 AM
            • TR103
              Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
              by TR103
              Hi, I have a Samsung UE50TU with:
              - sound and backlight, but no picture
              - when it arrived, it had a picture for a few seconds
              - it keeps rebooting
              - without ribbon cable between the two panel boards, it does not reboot but I have no picture
              - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
              - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

              - without cable between mainboard and lcd panel and with a jumpered...
              01-22-2025, 04:12 PM
            • DanPoka
              Guide me through repairing a Dell p2210f LCD ccfl backlight monitor
              by DanPoka
              I bought this p2210f dell monitor to fix. Schematic is the same as p2210.
              Behaviour is that monitors comes on but then backlight switches off almost instantly. If I look with flashlight I can still find the "No signal message". So definitely a backlight issue. Trying to advance the issue I proved that the protection circuit is switching off the backlight by shorting out C3 and resistor to disable the INL chip then re enable by removing the short.
              This is where it gets interesting. When I disassembled the monitor to solder leads on c3 capacitor I noticed the backlight flickered...
              02-15-2025, 05:05 AM
            • Loading...
            • No more items.
            Working...