Vizio TV E3D420VX, No picture, power led on+blink 1time+V logo shown=>turn off

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • budm
    Badcaps Legend
    • Feb 2010
    • 40746
    • USA

    #61
    Re: Vizio TV E3D420VX, No picture, power led on+blink 1time+V logo shown=>turn off

    That is the problem, we do not have the diagram of the board, otherwise you have to search lots of spec for the IC's.
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment

    • budm
      Badcaps Legend
      • Feb 2010
      • 40746
      • USA

      #62
      Re: Vizio TV E3D420VX, No picture, power led on+blink 1time+V logo shown=>turn off

      https://www.badcaps.net/forum/showthread.php?t=33209

      You may want to read post 9 by OP so you have to watch where you get the replacement board from.
      I hope that DKWILL will have the follow-up so we can ask him to check the 'LAMP STATUS' pin 13 DCV reading.
      Last edited by budm; 12-24-2015, 12:06 AM.
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

      Comment

      • djju
        Member
        • Dec 2015
        • 40
        • 미국

        #63
        Re: Vizio TV E3D420VX, No picture, power led on+blink 1time+V logo shown=>turn off

        Originally posted by budm
        https://www.badcaps.net/forum/showthread.php?t=33209

        You may want to read post 9 by OP so you have to watch where you get the replacement board from.
        I hope that DKWILL will have the follow-up so we can ask him to check the 'LAMP STATUS' pin 13 DCV reading.
        Thanks, Bud. But DKWILL's symptom is with audio. With audio means definitely main board works properly. That mean the initial stage of main board is passed and works main function but only screen problem.
        My problem is different. My problem is no picture, no sound, only showing v logo and completely power and backlight off. I hear no sound after having problem.

        By the way, thanks bud. I will ask him where to get the new board. I am going to buy new main board. I really hope that my problem will be solved by replacing new main board.

        Merry Christmas!!!

        Comment

        • budm
          Badcaps Legend
          • Feb 2010
          • 40746
          • USA

          #64
          Re: Vizio TV E3D420VX, No picture, power led on+blink 1time+V logo shown=>turn off

          I am refering to that when he put in the new board (defective board) it acts like your TV.
          Post 9:
          'One more piece of info. I ordered a new main board, board I got I think is defective cause with it installed, tv comes on, same as before, but after showing logo, whole tv shuts down. Power light goes off, this doesn't happen with original board, just loses back light.'
          Shopjimmy is where I get my boards.
          Never stop learning
          Basic LCD TV and Monitor troubleshooting guides.
          http://www.badcaps.net/forum/showthr...956#post305956

          Voltage Regulator (LDO) testing:
          http://www.badcaps.net/forum/showthr...999#post300999

          Inverter testing using old CFL:
          http://www.badcaps.net/forum/showthr...er+testing+cfl

          Tear down pictures : Hit the ">" Show Albums and stories" on the left side
          http://s807.photobucket.com/user/budm/library/

          TV Factory reset codes listing:
          http://www.badcaps.net/forum/showthread.php?t=24809

          Comment

          • djju
            Member
            • Dec 2015
            • 40
            • 미국

            #65
            Re: Vizio TV E3D420VX, No picture, power led on+blink 1time+V logo shown=>turn off

            Originally posted by budm
            I am refering to that when he put in the new board (defective board) it acts like your TV.
            Post 9:
            'One more piece of info. I ordered a new main board, board I got I think is defective cause with it installed, tv comes on, same as before, but after showing logo, whole tv shuts down. Power light goes off, this doesn't happen with original board, just loses back light.'
            Shopjimmy is where I get my boards.
            You mean, even though main board is replaced by new, the problem still remains. Therefore, it's not main board problem?

            Comment

            • djju
              Member
              • Dec 2015
              • 40
              • 미국

              #66
              Re: Vizio TV E3D420VX, No picture, power led on+blink 1time+V logo shown=>turn off

              Originally posted by djju
              You mean, even though main board is replaced by new, the problem still remains. Therefore, it's not main board problem?
              Hi. Bud. Your comments make me confused.
              Last edited by djju; 12-29-2015, 11:29 AM.

              Comment

              Related Topics

              Collapse

              • Joe24
                2070 Super with crazy power consumption numbers
                by Joe24
                Have a Gigabyte 2070 Super with some bonkers power draw readings. Card runs fine, other than some GPU throttling because of the power numbers. But GPU power always reads too high, more than the power reading for the entire card. And VRAM power always reads way too low, along with PCIe and 6-pin power readings. The 8-pin reading seems plausible.

                Typical readout while running 720p Furmark, 8x AA:

                GPU clock: 1590 MHz
                Mem clock: 1750 MHz
                GPU temp: 58.8 °C
                Hot spot: 71.8 °C
                Fan speed: 33% / 1000 rpm
                Mem used: 454 MB
                GPU load: 97%
                ...
                02-03-2023, 02:07 AM
              • usbdevice
                Acer X223HQ (Version Bbd) on/off-power-cycling
                by usbdevice
                Hi all

                There's two other threads about this monitor with seemingly the same problem. The problem was resolved in one case by replacing the entire PSU board and in the second one by replacing an unknown IC.

                https://www.badcaps.net/forum/showthread.php?t=50657
                https://www.badcaps.net/forum/showthread.php?t=40512

                The first one has pictures of the pcbs and I noticed that there's one IC and assorted caps not populated on mine (but the PCB itself looks identical) so I thought that'd warrant a new thread.

                It's my dad's old monitor. He...
                08-05-2022, 02:21 AM
              • zlr8r
                Dell inspiron 17 (7786) - DP/N 09P7JP - odd power issues, starting with no power LED
                by zlr8r
                hey guys, hoping for some pointers to repair an eBay bought "faulty" laptop.

                Ill try and give as much info as I can.

                Dell Inspiron 17 (7786) Laptop
                Service Tag: 5J0NHT2
                Bios: 1.9.0

                When I received this , it would only flicker on the KB backlight for a second, then off and on.
                Then it started getting weirder!
                Sometimes when attaching the AC power supply, and pressing various pre-boot diagnostic keyboard keys... it did try to boot, in fact out of a hundred attempts, the laptop did actually boot into the Bios ! but never has...
                12-12-2023, 09:31 PM
              • x_orange90_x
                Vizio E550i-A0 no power, no standby light
                by x_orange90_x
                I have a Vizio E550i-A0 that will not power on. It also does not display the standby light in the corner. I disconnected the main board cable to see if the backlights would light but they did not (maybe this is normal for this set?). I checked the voltages on the plug and they all read in mV or 0, so there's no voltage there. The fuses are ok, and the voltages of the 450v caps read about 160v. I see no visual damage on either the power supply or main board. I have read online that the main board is usually the culprit in this model, but not getting backlights with the main disconnected makes me...
                11-20-2023, 09:49 AM
              • proxneo
                iPad A2197 no power, A10 and other IC become warm, only 0.5A charge
                by proxneo
                Dear reader

                TL;DR: iPad not turning on, A10 and power IC become (very) warm when attempted to turn on but this power-on cycle has a 'cooldown' period wherein powering on doesn't work, does not take more than 0.5A charge.

                I am working on an iPad 7th generation 2197 from >2019 with no / limited charging and no boot issues. It is a refurbished purchase made in 2021. It appears the 'refurbish' company has either done prior motherboard work (all protective component shield layers are gone) or is one of the many trash refurbish companies (little screen adhesive left, component...
                12-01-2023, 04:14 AM
              • Loading...
              • No more items.
              Working...