Sony KDL-55EX720

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • AFajitas
    Senior Member
    • Dec 2014
    • 183
    • USA

    #21
    Re: Sony KDL-55EX720

    Welp, I screwed up and knocked the resistor off the board. My soldering tip is probably too blunt for work this small. So I put a dab of solder on the remaining contacts where the resistor used to be. Tv powers on, but the backlights are still turning off.

    Comment

    • AFajitas
      Senior Member
      • Dec 2014
      • 183
      • USA

      #22
      Re: Sony KDL-55EX720

      Managed to grab the driver board for $28 @ ebay. Will update the thread when i get it. Thanks for all the help so far.

      Comment

      • AFajitas
        Senior Member
        • Dec 2014
        • 183
        • USA

        #23
        Re: Sony KDL-55EX720

        Driver board fixed it, thanks guys.. This is a nice tv.

        Comment

        • budm
          Badcaps Legend
          • Feb 2010
          • 40746
          • USA

          #24
          Re: Sony KDL-55EX720

          Great! Thanks for the follow-up.
          Never stop learning
          Basic LCD TV and Monitor troubleshooting guides.
          http://www.badcaps.net/forum/showthr...956#post305956

          Voltage Regulator (LDO) testing:
          http://www.badcaps.net/forum/showthr...999#post300999

          Inverter testing using old CFL:
          http://www.badcaps.net/forum/showthr...er+testing+cfl

          Tear down pictures : Hit the ">" Show Albums and stories" on the left side
          http://s807.photobucket.com/user/budm/library/

          TV Factory reset codes listing:
          http://www.badcaps.net/forum/showthread.php?t=24809

          Comment

          Related Topics

          Collapse

          • brithepi2k
            Sony KD-65XE8596 no standby light
            by brithepi2k
            Hi,

            I’ve got a Sony KD-65XE8596 here that has no standby light coming on. I’ve tested the power board with the test meter, the TV needs 3.4 for the standby but only getting 2.4. Anything that I can change/check on the board to get it working? Pictures of the board are included.

            cheers...
            09-06-2025, 02:22 PM
          • matwan
            Sony XR-55X90J 5 blinks
            by matwan
            Hello,

            I have problem with SONY 55X90J. After several check status is as below;
            1. Running power board as stand alone:

            TCON_12V =~ 12.6V
            EVDD V On Max 24V= 19V.

            2.
            Running power board with TCON as stand alone:

            Effect as below, attched.

            3. When bottom LVDS cable is disconnected no blinks, but of course no TCON 12V and EVDD.
            "I'm almost sure it's a defective panel, but maybe someone has encountered a similar issue on their screen.

            Best regards....
            09-28-2025, 04:26 AM
          • GoodCapDude
            Sony XBR-75X940E intermittent 6 blinks error code
            by GoodCapDude
            Hi everyone. First post on Badcaps!

            I am trying to fix a Sony 940E from 2017 that either starts normally (and works perfectly until turned off) or goes straight to the 6 blinks error code without showing anything on the screen. It is frustrating to know that it can still work perfectly but is barely usable because of the difficulty starting it up. I am willing to try to short the BL_ERR but I would like to avoid that if possible. Does anyone have a view on this? Thanks a lot....
            09-20-2025, 06:07 AM
          • Seb932
            LG 49UB850V not switching on / standby LED off / LD701 blinks 5x
            by Seb932
            Hi,

            i'would like to fix my not working LG 49UB850V tv.

            Symptoms:
            -AC plugged in, Standby LED not working
            -Switching on, Standby LED blinks 3x. LD2300 on mainbord lights up and after ~30s LD701 on PWS board starts to blink 5x repetetive

            Checked already:
            -Powersupply Output in Standby => 3.5V ok
            -Switching On => PWR_On on P201 goes high and 3.5/12/24V are present on P201

            Any suggestions what to check next?

            Thanks in advance!
            09-14-2023, 06:28 AM
          • AK_777
            Sony KD-65A1 Repair – 4 Red Blinks Error
            by AK_777
            Hi everyone!
            I have a Sony KD-65A1 TV with a fault – 4 red LED blinks. After disassembly and visual inspection, I found that the G76 power board and DKA board had been replaced. It is also possible that TCON was replaced, but I am not sure – there are a few marker marks that could be factory-made.

            Based on assumptions, the previous service attempted to solve the issue by replacing potentially faulty components. I decided to investigate further, found a service manual, and figured out a way to power up the power supply unit autonomously and put the OLED panel and...
            02-20-2025, 04:15 PM
          • Loading...
          • No more items.
          Working...