Philips 42pfl5405 solarized image

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kastilio
    Member
    • Aug 2015
    • 13
    • Belgium

    #1

    Philips 42pfl5405 solarized image

    Hi all,

    I have this tv displaying a solarized image.
    The source of the problem wasa distroyed capacitor because of the water. I replace it with another capacitor having the same size only, don' t have a clue about the value.
    After that, i still have some vertical lines în the screen, and when black, i can see the image flickere.
    Attached Files
  • ReeceyBurger123
    Never Give Up !
    • May 2014
    • 7325
    • Britain

    #2
    Re: Philips 42pfl5405 solarized image

    More than likely the Lcd tab bond driver is corroded as well, probably not fixable.
    Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

    https://www.facebook.com/Telford-Tel...7894576335359/

    Comment

    • kastilio
      Member
      • Aug 2015
      • 13
      • Belgium

      #3
      Re: Philips 42pfl5405 solarized image

      I don't mind the lines, while it's running you can hardly observe it.
      But the flickering is annoying.

      Comment

      • ReeceyBurger123
        Never Give Up !
        • May 2014
        • 7325
        • Britain

        #4
        Re: Philips 42pfl5405 solarized image

        Do you know how to preform a tab bond repair it could be a lose connection caused by the corroded copper trace ?
        Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

        https://www.facebook.com/Telford-Tel...7894576335359/

        Comment

        • kastilio
          Member
          • Aug 2015
          • 13
          • Belgium

          #5
          Re: Philips 42pfl5405 solarized image

          I have pushed on the tab bond but no change on the image.
          I don't know how to repair that. Any suggestions?

          P.S
          I found this one:
          http://www.avsforum.com/forum/166-lc...ab-repair.html
          Last edited by kastilio; 10-22-2015, 03:09 AM.

          Comment

          • ReeceyBurger123
            Never Give Up !
            • May 2014
            • 7325
            • Britain

            #6
            Re: Philips 42pfl5405 solarized image

            Ok have you tried cleaning the area with Ipa ?
            Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

            https://www.facebook.com/Telford-Tel...7894576335359/

            Comment

            • kastilio
              Member
              • Aug 2015
              • 13
              • Belgium

              #7
              Re: Philips 42pfl5405 solarized image

              Yes. but no change in image.

              Comment

              Related Topics

              Collapse

              • reach7458
                philips 37pf8404 solarized image (changed as15f already)
                by reach7458
                I got here an philips 37pf8404 with a solarized image. image one

                First guess its a bad as15f. so I replaced it with another. Same issues
                So I replaced it again with a rm5101. Same issues

                Problem is that is projecting a solarized image irregularly. When I pull the hdmi cable and put it back all is okay for a undetermined time. It also helps if I change the input from one hdmi port and back.

                One thing thats weird and I don't remember if it was the case with the previous tvs I repaired.

                When the image is solarized it doesn't affect...
                08-03-2020, 08:27 AM
              • malekservis
                Philips 58PUS8536/12 Backlight ok, no image
                by malekservis
                Hello,
                the TV turns on fine, seems to be working, but shows no image outside of a thick white vertical line as it turns on that also disappears almost instantly, and then it's just backlight. I've tried unplugging either side, but still can't get an image. I suspect it's a panel issue, but thought i'd ask some smarter people to confirm. I haven't found any weird readings, but then again i'm just randomly poking around with a multimeter.

                Any information would be appreciated....
                08-07-2024, 07:48 AM
              • Document Archive
                HP Elite Slice G2 + Image Load & Asset Tag Elite Slice i5-7500T Specification for Upgrade or Repair
                by Document Archive
                This specification for the HP Elite Slice G2 + Image Load & Asset Tag can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Elite Slice G2 + Image Load & Asset Tag boardview and Elite Slice G2 + Image Load & Asset Tag schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please...
                09-12-2024, 02:20 PM
              • Kartowl
                philips 47pfl6158k/12 image faded away, sound still coming from TV
                by Kartowl
                Hi, my TV image started showing those lines and the image faded away, but sound is still coming from it, what could be the cause and is it fixable? I thought it could be the tcon board but I red on the internet that it could be a failing panel

                ...
                04-23-2024, 12:57 AM
              • Raulnn
                Tv Philips 55PUS6031 no image, backlight ok
                by Raulnn
                good night! I have this TV, with quite poor build quality. It has a tcon integrated into the panel, a single flex from the tcon to the panel, and the 2 panel controller boards joined by glued flexes. There is no way to separate them.

                The symptom is that the image is not visible, but the backlight works. How to know if the problem is in the main or in the tcon-panel? I can't override zones.
                05-14-2024, 02:11 PM
              • Loading...
              • No more items.
              Working...