Apex LD4088 Wont Turn on & No Standby Light

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • rebelkustoms
    Senior Member
    • Sep 2015
    • 150
    • USA
    #1

    Apex LD4088 Wont Turn on & No Standby Light

    Ok Guys,
    I am at it again. Found another set, an Apex LD4088 that does not turn on and doesn't have a standby light when plugged in? I havent opened it up and poked at the capacitors yet, but power supplys are really cheap for these things. Should I test anything before taking a twenty something dollar shot on a Power supply?
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: Apex LD4088 Wont Turn on & No Standby Light

      Check the 5V standby output, PSON, etc.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • ReeceyBurger123
          Never Give Up !
          • May 2014
          • 7325
          • Britain
          #3
          Re: Apex LD4088 Wont Turn on & No Standby Light

          Unplug the inverter Pcb its can cause the Psu to go into overload if its shorted.
          Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

          https://www.facebook.com/Telford-Tel...7894576335359/

            Comment

            • rebelkustoms
              Senior Member
              • Sep 2015
              • 150
              • USA
              #4
              Re: Apex LD4088 Wont Turn on & No Standby Light

              OKay, I got it on the bench today and tested a few things. I dont see any visible bad caps. Noticed it does have an on/off rocker switch on the back, but that did not change anything. It still does nothing in any state. I unplugged the inverter and tried it in all states, didnt get any change. I unplugged the connector and tested the pinouts, I get nothing on STB and nothing on any of them for that matter except I get a 5v out of 5VSB (see pic ) I dont really know what that one is unless it stands for SOund Board 5V. ANyway let me know what you think.

              http://imageshack.com/a/img633/3423/oT4BbK.png
              Attached Files

                Comment

                • budm
                  Badcaps Legend
                  • Feb 2010
                  • 40746
                  • USA
                  #5
                  Re: Apex LD4088 Wont Turn on & No Standby Light

                  Can we get good clear pictures of the whole boards, the whole back side of the TV so we can see how all the boards are connected together?
                  Never stop learning
                  Basic LCD TV and Monitor troubleshooting guides.
                  http://www.badcaps.net/forum/showthr...956#post305956

                  Voltage Regulator (LDO) testing:
                  http://www.badcaps.net/forum/showthr...999#post300999

                  Inverter testing using old CFL:
                  http://www.badcaps.net/forum/showthr...er+testing+cfl

                  Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                  http://s807.photobucket.com/user/budm/library/

                  TV Factory reset codes listing:
                  http://www.badcaps.net/forum/showthread.php?t=24809

                    Comment

                    • rebelkustoms
                      Senior Member
                      • Sep 2015
                      • 150
                      • USA
                      #6
                      Re: Apex LD4088 Wont Turn on & No Standby Light

                      Here are some pics of the board setup
                      Attached Files

                        Comment

                        • rebelkustoms
                          Senior Member
                          • Sep 2015
                          • 150
                          • USA
                          #7
                          Re: Apex LD4088 Wont Turn on & No Standby Light

                          Giving this one a bump, probably going to order a PSB today.

                            Comment

                            • rebelkustoms
                              Senior Member
                              • Sep 2015
                              • 150
                              • USA
                              #8
                              Re: Apex LD4088 Wont Turn on & No Standby Light

                              Put a new PSB in this guy and it fired right up. It looks great and works like now, PSB was cheap. I'm Happy!! Thanks for all the Help.

                                Comment

                                Previous template Next

                                Related Topics

                                Collapse
                                • ChristianBr01
                                  LED TV Samsung The Frame 55 inch QE55LS03RAU Standby Light only
                                  by ChristianBr01
                                  Hello everyone,
                                  I got a Samsung The Frame 55 inch TV for free from uncle cause it is not turning on anymore. I am in the second year of training as an electrician so I have knowledge already but I am far away from to be a pro.
                                  The TV has Standby but ist not turning on. A Friend of mine owns a 50 inch Frame TV so I checked the One Connect Box and the One Connect Cable there. Both are good and working normally. I have opened the TV case and measured some voltages on the Board.
                                  What I already found is that the 12.8V are not an the connector to the main board connector to the power...
                                  04-23-2025, 01:48 AM
                                • Jackching
                                  Samsung UN46EH5000F wont turn on. Blinks red standby light continuously
                                  by Jackching
                                  I know for sure it has a bad cap and one cold solder joint. Just wondering before i order the Caps if anyone has any experience with this model? Just making sure there isnt a common component that goes bad besides the caps....
                                  04-15-2024, 05:14 PM
                                • PNI E.
                                  Samsung ue55tu7170u not turn on and no standby led main bn9650990e
                                  by PNI E.
                                  Hi guys, I’m back here my friend give me her tv, that doesn’t turn on and no standby red led. When u plug in the cord the red led of one two second is on, then turn off. If you push the power button or the remote the red led blinks but nothing happen. I give u some photo with voltage, don’t look the fuse….because I blow it for mistake nd I dint have the right replace so I just put it for test the tv. The standby voltage should be 11,88 volt on the diode, but I have 13 volts. I put in the photo the different volts I test and there are someone negative…I don’t know if it s normal. On...
                                  03-17-2025, 04:23 AM
                                • Kaar3l
                                  Samsung QLED QE65Q7FNAT only standby light
                                  by Kaar3l
                                  TV: Samsung QLED QE65Q7FNAT
                                  PSU: BN4400940A
                                  MB: BN94-12832K

                                  I got the tv in spring 2024. At that time it started, then ran 60 sec and poweroff. Seemed like reboot issue. I didn't have time and room to check it in summer so I plugged it in and now the standby light is on. I press button on remote, standby light goes off and tries to start?. No picture or backlight on LCD. I thought about removing diodes like in this thread: https://www.badcaps.net/forum/troubl...sung-qled-q60r...
                                  09-24-2024, 01:35 PM
                                • jasonbay13
                                  Philips 37HFL5682L/F7 no standby light, incomplete service manual?
                                  by jasonbay13
                                  picked up a tv and when the power is plugged, the standby light flashes real quick then goes off. of 3.3, 12, 24v is all there but i couldnt find any 5v on the back-end board. ON/OFF is low, which it seems is what turns on the backlight so i removed the wire at the back-end board and put a 10k resistor to the 3.3v, which when plugged in brings on the backlight for a split second and also a blue light "LED1" on the inverter board, which goes off after a short time.
                                  am i missing something to bring on the backlight or is the inverter/ccfl gone bad? would that cause the inverter board...
                                  http://cerealbargain.duckdns.org
                                  12-01-2023, 09:55 PM
                                • Loading...
                                • No more items.
                                Working...