Un46c8000x

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • abdekader
    Senior Member
    • Jul 2014
    • 73
    • Turkey
    #1

    Un46c8000x

    Hello

    I have UN46C8000X Samsung TV , I have short circuit in power supply "PSLF251B02A" in these components ( ICM891=G5207 , QM891=230N06L ,QM892=STD452S)
    we don't have these components in the Turkey So, I want datasheet to these component or power supply schematic or any information about these components please , I want your help friends
    Attached Files
    Electronic Engineer from Syria,Aleppo
    Tags: None
    • abdekader
      Senior Member
      • Jul 2014
      • 73
      • Turkey
      #2
      Re: Un46c8000x

      no help , no one known information about these components ?
      Electronic Engineer from Syria,Aleppo

        Comment

        • abdekader
          Senior Member
          • Jul 2014
          • 73
          • Turkey
          #3
          Re: Un46c8000x

          no help , no one known information about these components ?
          Electronic Engineer from Syria,Aleppo

            Comment

            • budm
              Badcaps Legend
              • Feb 2010
              • 40746
              • USA
              #4
              Re: Un46c8000x

              https://cdn.badcaps-static.com/pdfs/...1931b51c26.pdf

              STD4525:

              230N06L:

              Did you even try searching the web at all at least?
              Last edited by budm; 05-28-2015, 02:22 PM.
              Never stop learning
              Basic LCD TV and Monitor troubleshooting guides.
              http://www.badcaps.net/forum/showthr...956#post305956

              Voltage Regulator (LDO) testing:
              http://www.badcaps.net/forum/showthr...999#post300999

              Inverter testing using old CFL:
              http://www.badcaps.net/forum/showthr...er+testing+cfl

              Tear down pictures : Hit the ">" Show Albums and stories" on the left side
              http://s807.photobucket.com/user/budm/library/

              TV Factory reset codes listing:
              http://www.badcaps.net/forum/showthread.php?t=24809

                Comment

                • abdekader
                  Senior Member
                  • Jul 2014
                  • 73
                  • Turkey
                  #5
                  Re: Un46c8000x

                  thank you budm , but i don't find this IC G5207 in Turkey , Do you know IC the same work this IC please
                  Electronic Engineer from Syria,Aleppo

                    Comment

                    • tibimakai
                      Badcaps Legend
                      • Jan 2012
                      • 3680
                      • USA
                      #6
                      Re: Un46c8000x

                      Some components are available, only from China.

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • Tynan Dill
                          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                          by Tynan Dill
                          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                          Upon bringing it home and plugging it up, it showed a standby light.

                          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                          The screen seems to blackout and stay black, but with a flashlight I can see the display.

                          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                          Assuming...
                          ORIGINAL POWER SUPPLY BOARD
                          7 Photos
                          11-22-2024, 01:46 PM
                        • sam_sam_sam
                          Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
                          by sam_sam_sam
                          I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

                          One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
                          03-31-2024, 02:12 PM
                        • cheeky2
                          Samsung BN44-00262A H37F1-9SS power supply help finding blown value components!
                          by cheeky2
                          This Samsung combined power supply and inverter was replaced a while ago from a Samsung 37inch LE37B530P7W TV. However I would like to repair this one.
                          I have replaced the Mosfets Q1820 and Q1821 ( FDPF7N50U) which were both blown and the fuse FM802S. The schematic for this power supply that is attached doesn't relate to this power supply as the driving transistors and diodes are D1830, D1831, D1832, D1833, Q1811 & Q1810 are nowhere on the schematic!
                          Does anyone know what the components for D1830, D1831, D1832, D1833, Q1811 & Q1810 should be? I ask as I did change the Mosfets...
                          06-15-2025, 05:12 AM
                        • sam_sam_sam
                          Modification to a ZD-987 desoldering/soldering station using a external switching power supply
                          by sam_sam_sam
                          I have been working on this concept for quite some time now with limited success but recently I found a switching power supply that is setup for the voltage that this soldering station needs to operate at however it also needs part of the secondary circuit from the original switching power because you need several voltage rails

                          I once tried to get a ZD-915 desoldering station to work on a 18 volt battery power supply but unfortunately things did not go well but I did find a work around but I might try this idea again but going at a little differently more about this another time...
                          07-01-2024, 06:34 AM
                        • JimBanville
                          Definitive technology SC 2000 subwoofer amp's power supply clicking and popping
                          by JimBanville
                          The sub developed a constant popping every couple seconds from woofer and power LED flickering with nothing but wall AC connected. Connecting an audio cable didn't change anything. It doesn't play but a second or two of audio in between the pops.
                          Opened it up and discovered the power supply is making a faint clicking or ticking sound.
                          I measured the amp's output to the woofer and it pulses up to 50mv DC to be driver. The pulses coincide with the power supply ticking/clicking.
                          I measured the power supply output going to the amp board and it too has this pulsing. Voltage cycles...
                          09-13-2023, 07:21 AM
                        • Loading...
                        • No more items.
                        Working...