Tnpa5063 in need of repairing

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Rickig
    Senior Member
    • Mar 2015
    • 112
    • England
    #1

    Tnpa5063 in need of repairing

    Any body out there repaired a tnpa5063 panasonic sc board?
    See a repair kit on eBay but it's in the usa.
    Could do with it being repaired or if someone has a replacement I can buy.
    Tags: None
    • sordids999
      Badcaps Legend
      • May 2013
      • 2149
      • uk
      #2
      Re: Tnpa5063 in need of repairing

      https://www.badcaps.net/forum/showthread.php?t=41542
      this may help more

        Comment

        • Rickig
          Senior Member
          • Mar 2015
          • 112
          • England
          #3
          Re: Tnpa5063 in need of repairing

          Thanks. This sort of electronic repair is beyond me. I need someone to repair the board for me. But thanks

            Comment

            • tom66
              EVs Rule
              • Apr 2011
              • 32560
              • UK
              #4
              Re: Tnpa5063 in need of repairing

              May want to ask GTVWatford on eBay - they do a lot of repairs of similar boards.
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Borse2008
                  Seeking Advice: Repairing Dell U3425WE Monitor with Faulty USB-C/Thunderbolt Ports
                  by Borse2008
                  Hi everyone,

                  Looking for some advice or opinions on what to do with a monitor issue I’ve run into. Apologies in advance is this crossovers a few forum categories.

                  I have a Dell U3425WE, which I've recently replaced with another model. That said, the original unit is still fully functional in terms of the display — it works perfectly over HDMI and DisplayPort. However, the USB-C and Thunderbolt 4 ports have stopped functioning correctly. The Issue:
                  • The 90W Thunderbolt 4 port (circled in the photo) no longer charges or powers any device, including laptops or MacBooks.
                  • There’s
                  ...
                  07-15-2025, 04:55 AM
                • subwagon
                  Repairing or replacing an LMB202E LCD Display
                  by subwagon
                  Hello everyone, I'm in the process of repairing a tabletop air cleaner, but am having difficulty repairing a failing LCD display.

                  3 years ago I ran a soldering iron over the ribbon cable and got the entire display to come back to life. Unfortunately it gradually failed again but this time I wasn't so lucky at getting it to revive with heat.

                  I believe that I may have gotten the ribbon too hot this time, so I'm looking for an alternative to an LMB202E. Unfortunately I am not having much luck. I did find an LMB202A, LMB202C, and LMB202D but I'm afraid the pin outs are...
                  10-27-2023, 01:39 PM
                • chronic519
                  Mats / mods: detected and repaired GPU fault. Cant seem to test after!
                  by chronic519
                  Hello.

                  GPU came in, green lines. Spent lots of time using to get the Mats / mods drive working (found on youtube).
                  Found issue with a RAM block
                  Replaced, green lines gone.
                  Trying to test again, assuming getting the false positive. Originally had over 1K on a single bank. Now getting tosses low between banks.
                  Used a good card to test and same results low errors 32+.

                  I am just search for some form of command to do a full test on the GPU.
                  I just ran the mats command with my good GPU and passed after roughly 40 min.
                  The repaired one, ran...
                  05-20-2025, 07:56 PM
                • h0m3w0rk
                  Repairing a Music Store Professional GO! SUB 18A
                  by h0m3w0rk
                  Hello everyone,

                  I'm working on repairing a Music Store Professional GO! SUB 18A bass subwoofer, and I need some help troubleshooting an issue with the power amplifier board. The board uses an IR2153 driver and originally had two SLW20N50C MOSFETs. Unfortunately, these MOSFETs burned out. I replaced them with two TK20J60W MOSFETs; however, these also failed almost immediately.

                  Here are some details:
                  • SLW20N50C (original):
                    • Rated for 500 V
                    • Typical RDS(ON): 0.21 Ω
                    • Continuous Drain Current: 20 A at 25°C (13 A at 100°C)
                    • Pulsed Drain Current: 80 A
                    • Avalanche
                  ...
                  02-27-2025, 07:42 AM
                • pastapoulos
                  Repairing GIGABYTE RTX 3070 TI GAMING OC 8GB Rev.1.0
                  by pastapoulos
                  Hi everyone,

                  I picked up this non-working graphics card with the intent of repairing it. I don't know the details of its failure, but the card is in near-perfect cosmetic condition. It had never been opened before I started working on it.

                  During my inspection, I didn't spot any obvious physical damage. However, when testing, I discovered the PCIe 12V line was open. I replaced the blown fuse and rechecked the measurements—no short circuits on the main lines.

                  When I tested the card in a system, it prevented the PC from booting. I checked the main voltages,...
                  11-22-2024, 08:57 AM
                • Loading...
                • No more items.
                Working...