Sharp 60" LCD TV Aquos LC-60LE650U image issues

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Abe700
    Member
    • Feb 2015
    • 11
    • USA

    #1

    Sharp 60" LCD TV Aquos LC-60LE650U image issues

    Hi,
    I have a Sharp 60" TV Model LC-60LE650U LCD TV. The picture is darker, distorted and keeps getting horizontal dark flashing lines or bands.


    The things I have done:

    1. Tap and twist the edges screen, nothing happens and picture remained the same.
    2. Ordered new T-con card, problem remains.
    3. I thought of taking one ribbon out of the t-Con and turn the unit on, then half of the screen went white and the other half remained having the same problem.
    4. I put the one I disconnected back, and disconnected the other one ... then half of the screen went white, and the other have was perfectly fine nice picture.
    5. hm, that got me thinking may be the ribbon is the problem, so I switch ribbons, but that did not have any effect on the previous results. Ribbons acted the same when switched.

    Any idea what could be the problem? Since one half of the screen works perfectly when the defected half is disconnected, why when we connect both the whole screen goes bad?

    Thanks!
    Attached Files
  • freakaftr8
    Badcaps Legend
    • Oct 2012
    • 3743
    • USA

    #2
    Re: Sharp 60" LCD TV Aquos LC-60LE650U image issues

    Well sadly that is a sign of panel failure. Maybe at the very least you could try pressing on the tab bonds to see if the picture comes back.

    I'm surprised I don't see too many sharp panels fail. Mainly AUO and Samsung.
    Last edited by freakaftr8; 02-16-2015, 01:32 PM.
    Did I leave the soldering iron on?

    Comment

    • Abe700
      Member
      • Feb 2015
      • 11
      • USA

      #3
      Re: Sharp 60" LCD TV Aquos LC-60LE650U image issues

      Thank you freakaftr8 for your replay,
      If you look at the last picture, it shows half the panel working fine when the other half is unplugged. That made me rule out the panel failure. Pressing on the tab bonds does not make any difference.

      Comment

      • freakaftr8
        Badcaps Legend
        • Oct 2012
        • 3743
        • USA

        #4
        Re: Sharp 60" LCD TV Aquos LC-60LE650U image issues

        Yes but if there us a short in the panel on the bad side this will take down the drive voltages and functions that the tcon uses to drive the panel causing both sides to display the problem. Kind if like mirroring the image.
        Did I leave the soldering iron on?

        Comment

        • Abe700
          Member
          • Feb 2015
          • 11
          • USA

          #5
          Re: Sharp 60" LCD TV Aquos LC-60LE650U image issues

          Thank you very much for the info. I appreciate it.

          Comment

          • tibimakai
            Badcaps Legend
            • Jan 2012
            • 3680
            • USA

            #6
            Re: Sharp 60" LCD TV Aquos LC-60LE650U image issues

            Can't be some shorted capacitor on the panel's PCB?

            Comment

            • Abe700
              Member
              • Feb 2015
              • 11
              • USA

              #7
              Re: Sharp 60" LCD TV Aquos LC-60LE650U image issues

              Originally posted by freakaftr8
              Yes but if there us a short in the panel on the bad side this will take down the drive voltages and functions that the tcon uses to drive the panel causing both sides to display the problem. Kind if like mirroring the image.
              ----------------------
              freakaftr8 seemed to be confident that the panel was the problem. So I did not want to waste much more time on it. Decided to part it.

              Comment

              • Rpl313
                New Member
                • May 2016
                • 3
                • USA

                #8
                Re: Sharp 60" LCD TV Aquos LC-60LE650U image issues

                Hi i have the same exact tv and my tv is flashing 2 slow lights 5 fast lights, i have zero picture at all , when plugged into cable it shows sharp logo then goes black , i tried a new power supply board but didnt help i unplugged the tcon board and the screen lights up for a few then shuts off

                Comment

                • sputnikoff
                  Badcaps Veteran
                  • Feb 2016
                  • 203
                  • canada

                  #9
                  Re: Sharp 60" LCD TV Aquos LC-60LE650U image issues

                  I have same issue with right ribbon disconnected the tv remanis on only left side got video on right its primarily white.I gus theres a short beyond that point.Otherwise i have also 2 short and 5 long pulses and unit wont power up.Thanks for good info guys this site rocks.

                  Comment

                  • nomoresonys
                    Badcaps Legend
                    • Jan 2013
                    • 12145
                    • U.S.

                    #10
                    Re: Sharp 60" LCD TV Aquos LC-60LE650U image issues

                    May be a candidate for surgery, check the threads.

                    Comment

                    • Moreno83
                      Badcaps Legend
                      • Jun 2014
                      • 2008
                      • The Netherlands

                      #11
                      Re: Sharp 60" LCD TV Aquos LC-60LE650U image issues

                      You could remove the tabs on either the left or right side of the panel. You need to figure out wich side of the panel is bad and remove those tabs on the side ( 3 or 4 small tabs ).
                      I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

                      Comment

                      • sputnikoff
                        Badcaps Veteran
                        • Feb 2016
                        • 203
                        • canada

                        #12
                        Re: Sharp 60" LCD TV Aquos LC-60LE650U image issues

                        Mine was same as your pic abe700 tried switch to other side no luck.Saved all boards rest trashed

                        Comment

                        • Davi.p
                          Hobbist Tech
                          • Sep 2009
                          • 4318
                          • Italy - Milan

                          #13
                          Re: Sharp 60" LCD TV Aquos LC-60LE650U image issues

                          i think something can be made, if you want i had a similar issue and solved in a difficult manner, search for Sony kdl-60ex700 for info. Not sure if same problem, surely similar but different screen model.

                          Comment

                          • budwich
                            Badcaps Legend
                            • Jul 2015
                            • 3097
                            • Canada

                            #14
                            Re: Sharp 60" LCD TV Aquos LC-60LE650U image issues

                            that was likely a mistake.... but it depends on what you wanted to do with the set. This is a old thread... since then people have found easy ways to save the set. Just swapping tcon to panel cables isn't doing nothing other than checking which side of the set gives the "best" picture.... from there you need to remove the tabs of the offending side.
                            Anyways, the boards are probably OK.

                            Comment

                            Related Topics

                            Collapse

                            • scubacamper
                              Sharp Aquos LC-70C6400U Half Screen Dark
                              by scubacamper
                              I found another post on this site the other day which has been very helpful in troubleshooting this issue I am having with my tv. The left half of the screen is dark, and the other half is VERY slow to generate it's image - and it only generates part of its image at that.
                              Based on this yt video, I have narrowed it down to an issue (short?) on the left side of the display, somewhere in the system of ribbon cables.
                              when I remove the bezel and the rear cover, I can get the image to display correctly by manipulating the ribbon cables on the left side which connects the left lower display...
                              05-03-2025, 12:19 PM
                            • sefoster
                              Sharp Aquos Lc-80LE757U flashing Sharp on screen when plugged in
                              by sefoster
                              I have a Sharp Aquos LC-80LE757U that randomly made a loud popping noise when when watching TV one day. We found that the fuse blew and the thermistor. We ended up replacing the entire power supply board and have also replaced the TCON board. Now as soon as I plug the TV in it lights up and has the Sharp logo flashing on and off of the screen. If I unplug the ribbon cable from the TCON board to the main board I get the 2 long 5 short error code. Any ideas on where to go from here? We've tried resetting it but nothing has worked. If we plug it in and let it cycle through the flashing of the Sharp...
                              11-20-2022, 09:29 AM
                            • jonah1024
                              Sharp Aquos LC-40UG7252E LCD TV burn in?
                              by jonah1024
                              Hello!

                              I'm a few days old into this TV screens repair universe so please bear with me.

                              Recently, and all of a sudden my 40” 4K Sharp Aquos LCD TV turned on with colors all smudged in some places on the screen that remain like that even without any kind of video source. I do have image but the colors are smudged/tinted/ washed out in patches as per defects. This to me looks similar to burn in but I’m shore this is not an OLED.

                              - I did the classic unplug and hold power button to discharge the caps but it didn't help.
                              - I did a factory reset as well...
                              07-16-2024, 04:23 AM
                            • klassic
                              Sharp Aquos LC-60LE635E three blinks
                              by klassic
                              Hi community,

                              I will describe my problem with a TV in those short following terms to be the most precise :

                              What i have :
                              Sharp Aquos LC-60LE635E
                              power board DPS-162KP-1
                              main logic board QPWBXF733WJN2

                              symptoms :
                              white led light logo at startup,
                              after 2 minutes, blinking 3 times a row, repeating
                              no backlight (and apparently no picture, checked panel with flashlight)
                              no startup sound

                              powerboard investigations :

                              1-2 PNL : 0v
                              3-4 GND
                              5-6-7-8 UR : 13.15v
                              9-10-11-12...
                              10-24-2023, 01:39 PM
                            • Megan0
                              Sharp LC-70UD1U Half screen Normal half screen is white
                              by Megan0
                              My Sharp LC-70UD1U Screen is black and flashing, "I attached the video"

                              Well, I opened the back cover and as you can see in the picture, I unplugged 2 L (left) ribbon, TV turned ON, but half of screen (Right) is normal, and the other side (Left) is white. I continued to test...
                              Result:
                              I swapped the ribbons L<-->R = Blinking 2x power light, 5x timer light
                              Unplugged 2 R Plug 2 L = Blinking 2x power light, 5x timer light
                              Unplugged 2 L Plug 2 R = Blinking 2x power light, 5x timer light

                              Only in the first test, where I did not
                              ...
                              01-19-2022, 11:20 AM
                            • Loading...
                            • No more items.
                            Working...