M3D421SR main board replacement

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • twoj
    Member
    • Feb 2015
    • 25
    • USA

    #1

    M3D421SR main board replacement

    I can not find a new mainboard for this TV, its # is: TXBCB2K00603Q.

    Does anyone know its 'brother': #TXBCB2K00605Q would give me a problem?

    Thanks
  • splitcrete
    Badcaps Veteran
    • Dec 2012
    • 387
    • usa

    #2
    Re: M3D421SR main board replacement

    Google the part number...

    Comment

    • twoj
      Member
      • Feb 2015
      • 25
      • USA

      #3
      Re: M3D421SR main board replacement

      Originally posted by splitcrete
      Google the part number...
      I did, but I can not get a confirmation that this other part (5Q) will be exact replacement for (3Q). I received conflicting reports, one seller said that they are not compatible and another said that they will be fine.

      TXBCB2K00605Q is listed as a part that goes into M3D421SR, I'm just looking for some clarification (since Vizio does not provide any) from the field to make sure this will work.

      Thanks

      Comment

      • Moreno83
        Badcaps Legend
        • Jun 2014
        • 2008
        • The Netherlands

        #4
        Re: M3D421SR main board replacement

        A quick search on Ebay and i found that the boards below are for the M3D421SR model…..

        CBPFTXBC2K00601Q
        CBPFTXBC2K00602Q
        CBPFTXBC2K00603Q
        CBPFTXBC2K00604Q

        Did you compare them visually? It could be that 1 model is used for example a different country?
        I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

        Comment

        • twoj
          Member
          • Feb 2015
          • 25
          • USA

          #5
          Re: M3D421SR main board replacement

          I do not have the new 5Q board yet. So no visual comparison is possible yet.

          I looked all over, and no-one has a new 3Q in stock (but that one post on ebay #321476068404, board is 'used').
          I was also unable to find any further reference to the different flavors of the TXBCB2K0060XX. One seller said that as long as the the first set of number is: CBPFTXBC2K006 it should work, however another said that it will not.

          I ended up ordering a 'new' 5Q board, well see how it works when I get it. Trial by fire! :-)

          But, if anyone has any explanation to what these number signify, that would be great!

          Regards

          Comment

          • Moreno83
            Badcaps Legend
            • Jun 2014
            • 2008
            • The Netherlands

            #6
            Re: M3D421SR main board replacement

            Its not a problem that the board is used? Im thinking that these boards have minor differences.
            You could have googled for images of the 5Q board and compare it to yours

            good luck and let me know if the board works or not.
            I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

            Comment

            • twoj
              Member
              • Feb 2015
              • 25
              • USA

              #7
              Re: M3D421SR main board replacement

              From what I saw in the pics, I could not find any differences. Maybe I missed something.
              I was hoping to find manufacturer's x-ref sheet, but I think I may be dreaming here.

              I will definitely post back as to how it goes. It may help out the next guy.

              Comment

              • twoj
                Member
                • Feb 2015
                • 25
                • USA

                #8
                Re: M3D421SR main board replacement

                Here are my 2 board, I can not see any differences to my untrained eyes.

                Anybody care to take a quick peek?
                Attached Files

                Comment

                • twoj
                  Member
                  • Feb 2015
                  • 25
                  • USA

                  #9
                  Re: M3D421SR main board replacement

                  OK! I got the new board and I replaced it.

                  IT WORKED! :-)

                  Thank you and good luck! If anyone is interested in my old CBPFTXBC2K00603Q let me know.

                  Comment

                  • tvquestions
                    New Member
                    • Aug 2015
                    • 3
                    • usa

                    #10
                    Re: M3D421SR main board replacement

                    Hey, I see that you replaced your main board with the 5Q. Is it still in working order?

                    Comment

                    • twoj
                      Member
                      • Feb 2015
                      • 25
                      • USA

                      #11
                      Re: M3D421SR main board replacement

                      Working Great!

                      No problems at all! Got lucky this time.

                      Comment

                      • ecking767
                        Badcaps Veteran
                        • Oct 2009
                        • 492
                        • USA

                        #12
                        Re: M3D421SR main board replacement

                        This fix can help some with bad firmware, I can't find any information on the other board part number matching or being compatible with the M3D421SR

                        http://www.ernestos-electronics.com/...re-update-fix/

                        Comment

                        • twoj
                          Member
                          • Feb 2015
                          • 25
                          • USA

                          #13
                          Re: M3D421SR main board replacement

                          ecking767, this fix might work if your board is semi-fried; however my was partially working.
                          TV was functional, with the exception of HDMI signal inputs. All other inputs worked, including VIZO apps.

                          Comment

                          • ecking767
                            Badcaps Veteran
                            • Oct 2009
                            • 492
                            • USA

                            #14
                            Re: M3D421SR main board replacement

                            Originally posted by twoj
                            ecking767, this fix might work if your board is semi-fried; however my was partially working.
                            TV was functional, with the exception of HDMI signal inputs. All other inputs worked, including VIZO apps.
                            You will be surprise on how a bad Firmware can effect a main board. not just stuck on logo or not powering on problem. other problem like no picture and missing HDMI ports. Its a very importance part on a main board

                            Comment

                            • twoj
                              Member
                              • Feb 2015
                              • 25
                              • USA

                              #15
                              Re: M3D421SR main board replacement

                              So the firmware on these can get corrupted?

                              Have you ever seen it corrupt the HDMI inputs only?

                              Comment

                              • tvquestions
                                New Member
                                • Aug 2015
                                • 3
                                • usa

                                #16
                                Re: M3D421SR main board replacement

                                twoj, Thank you! I am trying to find the 5Q online and can't seem to find it. Could you tell me where you ordered yours from?

                                Comment

                                • twoj
                                  Member
                                  • Feb 2015
                                  • 25
                                  • USA

                                  #17
                                  Re: M3D421SR main board replacement

                                  I go mine on ebay. Seller was: usblu_ray626

                                  Contact him to see if has any more.
                                  OR try to reflash the firmware @ $35 seems reasonable.

                                  BTW, what is the problem with your TV?

                                  Comment

                                  • tvquestions
                                    New Member
                                    • Aug 2015
                                    • 3
                                    • usa

                                    #18
                                    Re: M3D421SR main board replacement

                                    Black screen. Won't turn on, but Vizio logo lights up when connected to a power source. I took it to the repairman, but he can find the part (main board) anywhere, so I thought I'd offer to help look (that way I wouldn't be charged markup on the part as well.

                                    Comment

                                    • twoj
                                      Member
                                      • Feb 2015
                                      • 25
                                      • USA

                                      #19
                                      Re: M3D421SR main board replacement

                                      I'd try ecking767 fix above... for $35 you can not beat it... I do not know enough to say it will/will not work, but $35 is a small price to find out.

                                      Keep looking on ebay, and I would try other number as well 3,4,5,6 in the series...

                                      Comment

                                      Related Topics

                                      Collapse

                                      • jb_Bak
                                        Sony xbr-65x900c main board issues?
                                        by jb_Bak
                                        Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

                                        Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
                                        Power Board Connector that goes to Main board
                                        CN6401
                                        Pin 01 NC
                                        Pin 02 NC
                                        Pin 03 "BL_ON": 0V
                                        Pin 04 "N/C"
                                        Pin 05 "STBY 3.3V": 3.5V
                                        Pin 06 "GND": N/C
                                        Pin 07 "AC_OFF"...
                                        09-27-2021, 04:52 PM
                                      • JDC
                                        (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
                                        by JDC
                                        ONN 100012588
                                        Issue: No Power, Then Rebooting After Main Board Change

                                        Short answer: replace main board and power board
                                        Technical answer: replace main board and Q306 & Q307 on power board.

                                        Long answer:

                                        TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
                                        07-15-2022, 07:39 AM
                                      • Tynan Dill
                                        Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                                        by Tynan Dill
                                        I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                                        Upon bringing it home and plugging it up, it showed a standby light.

                                        I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                                        The screen seems to blackout and stay black, but with a flashlight I can see the display.

                                        With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                                        Assuming...
                                        11-22-2024, 01:46 PM
                                      • cheeky2
                                        Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
                                        by cheeky2
                                        I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
                                        Obviously the same LVDS connector for the screen connection...
                                        05-25-2024, 03:27 AM
                                      • Asraf Atb
                                        Help Needed: Samsung UE55MU8000 Dead - Possible Main Board Issue
                                        by Asraf Atb
                                        Hi everyone,

                                        Im looking for some advice regarding my Samsung UE55MU8000 TV with main board model BN94-11606C. The TV suddenly stopped turning on and now shows no signs of life at all not even the standby light at the bottom.

                                        Initially, I suspected an issue with the PSU, so I took it to a repair center. They tested it and confirmed that the PSU works perfectly, even on other TVs. Based on that, I started investigating the main board.

                                        I disconnected the main board from the PSU, and the backlight turned on, which seems to confirm the main board is the issue....
                                        01-27-2025, 05:02 PM
                                      • Loading...
                                      • No more items.
                                      Working...