Hey guys I was poking around the forum for an answer and still dont have a clear answer as to what could be the cause the video and audio not to work on this Vizio Model # e701i-a3. Serial # LFTRNXAP1002583
My suspicions are either Main Board or T-CON .
What I've done so far...
Tested the power supply for power with meter and seems to be in good working condition.
No signs of bad Fuses
No signs of bad caps.
No signs of bad Diodes.
Tested each HDMI port on the Main Board for audio/video and nothing.
Unplugged one ribbon from each side of the T-con at a time and no change was seen.
Disconnected the ribbons going to the power buttons and to the IR sensor one at a time and vice versa and no change
I dont think the T-con would be responsible because I know the T-con isnt responsible for audio issues.
I've heard about the recall with the 70" Vizio's however the one I have doesn't fall under the ones recalled, however its almost doing the same thing as those other ones.
All in all, im suspecting a bad Main board.
Any input at all would be helpful
Thank you,
My suspicions are either Main Board or T-CON .
What I've done so far...
Tested the power supply for power with meter and seems to be in good working condition.
No signs of bad Fuses
No signs of bad caps.
No signs of bad Diodes.
Tested each HDMI port on the Main Board for audio/video and nothing.
Unplugged one ribbon from each side of the T-con at a time and no change was seen.
Disconnected the ribbons going to the power buttons and to the IR sensor one at a time and vice versa and no change
I dont think the T-con would be responsible because I know the T-con isnt responsible for audio issues.
I've heard about the recall with the 70" Vizio's however the one I have doesn't fall under the ones recalled, however its almost doing the same thing as those other ones.
All in all, im suspecting a bad Main board.
Any input at all would be helpful
Thank you,
Comment