JRade
Member
Last Activity: 04-26-2025, 09:39 AM
Joined: 11-14-2013
Location: Kursumlija
-
I'm waiting for IC, I'll get back to you when I try it. -
Here is the schematic of the power supply board.
Can I know which IC111 this is?
Thanks!Leave a comment:
-
Leave a comment:
-
LG 37LP1R-ZE,NO 5V IN THE MAINS
Model:37LP1R//37LP1R-ZE//37LP1R-ZE.ALEWLF
Power supply(SMPS)-KNP-3371(IDTV6 & DCR)//KNP-3372 (Tornado)//REV:A 05. 3.21
it is model:KNP-3372//6871TPT315B
It has an 8-pin IC111 connected to a small transformer T101 in the network,
which probably gives a voltage of 5V, but the IC is broken and I don't know the label.
Please if anyone knows the IC111 marking or the schematic of this network.
Thanks! -
Re: Samsung UE48H6620SV, no picture
All the lights are the same 3V model, I tested them
all the lights are onLeave a comment:
-
Re: Samsung UE48H6620SV, no picture
single leds
??Last edited by JRade; 10-26-2022, 11:52 AM.Leave a comment:
-
Re: Samsung UE48H6620SV, no picture
Ok,thanks!Leave a comment:
-
Samsung UE48H6620SV, no picture
The backlight was not working properly, I replaced it and it works
but when I installed the board and connected the 2 straight cables to the T-con, there is no backlight.
I connected the satellite receiver with a scart cable and there are tons of them.
When I disconnect one flat cable (left or right) there is a backlight, but there is no image on the display, but of course there is sound.
When the backlight is on, the entire screen is dark blue.
There is a voltage of 12V DC on the T-con and the fuse on the T-con is correct.
Please... -
TV:LG55LB630V ZA,no backlight
Respect
Please, can you write a backlight label for this TV?
Thanks! -
Re: restart problem with Bush LED TV
Data from the cover of the TV...Leave a comment:
-
Re: restart problem with Bush LED TV
TV LED Telefunken,T50FX182LPS
Please if anyone has the firmware for the motherboard:Vestel 17MB95S-1,170912
Label:10086139 23128614 256 50"
V219f_MB95S(OEM)
27034366 CMOC6
Best Regards!Leave a comment:
-
-
TV CRT Thomson 32WR45E G
Hello,
It is chassis:ICC20 EN
Error: There is no horizontal synchronization.
I replaced the CC060 / 1uF, the error has not been corrected.
Could it be a bad processor IC001 / TDA9321H?
Thanks in advance!...Last edited by JRade; 09-07-2015, 04:24 PM. -
Re: Panasonic Plasma TV TX-P50X50B - Shorted power supply
See link:[url]http://www.radeel.co/index.php/en/various-parts[/url]Re: Panasonic Plasma TV TX-P50X50B -...us-parts[/url]Leave a comment:
-
Re: Panasonic Plasma TV TX-P50X50B - Shorted power supply
It is.
Sorry!...Leave a comment:
-
Re: Panasonic Plasma TV TX-P50X50B - Shorted power supply
It is shema
Best Regards!...Leave a comment:
-
Re: Panasonic Plasma TV TX-P50X50B - Shorted power supply
I ask because I have a Panasonic TX-P50X50E
with the same Error: Invalid MOSFETs Q207 and Q208 ?
Please reply
Best Regards!Leave a comment:
-
Re: Panasonic Plasma TV TX-P50X50B - Shorted power supply
Is power panels repaired and which parts were replaced?
Please reply.
Best RegardsLeave a comment:
No activity results to display
Leave a comment: