hi guys i have a beko 32wla520hd lcd tv.just wondering if anyone could help me with it.the fault is the picture goes from the tv but the sound stays.swapped the inverter board and the tcon board but the fault is still there.looked at the power board and cant see any raised caps and only have a multimeter so cant even check the capacitors.but when the picture does go and sound stays when i turn the tv off then back on the picture returns.not realy experienced with tvs have fixed a few by swapping the power board caps for new ones.just wondering if it would be worth swapping the caps on this tv power board.any advice would be appreciated
32 inch lcd sound no picture
Collapse
X
-
Re: 32 inch lcd sound no picture
hi guys i have a beko 32wla520hd lcd tv.just wondering if anyone could help me with it.the fault is the picture goes from the tv but the sound stays.swapped the inverter board and the tcon board but the fault is still there.looked at the power board and cant see any raised caps and only have a multimeter so cant even check the capacitors.but when the picture does go and sound stays when i turn the tv off then back on the picture returns.not realy experienced with tvs have fixed a few by swapping the power board caps for new ones.just wondering if it would be worth swapping the caps on this tv power board.any advice would be appreciatedPlease Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: 32 inch lcd sound no picture
Could you post pictures please.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: 32 inch lcd sound no picture
so these are some pics as you can see in the inverter cable at the top of the mainboard not sure if that looks like a burnt cable second from the end,could that be the cause? as you can see there is no way to test the inverter while its connected to the mainboards as it is under the main chasse.i took a picture of the old inverter i pulled out.can i check voltage from mainboard to inverter from that inverter cable at the top of the mainboard.once again any help is appreciated.Comment
-
Re: 32 inch lcd sound no picture
Check if the psu and motherboard are giving voltage to the inverter, dont test the inverter only test the connectors coming off the psu/mainboard.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: 32 inch lcd sound no picture
could you explain in detail how i do this.im new to a multimeter.do i put the red and black cable of the multimeter in the red and black on the mainboard inverter connector.did you notice the burnt cable in that picture?and how would i check the psu.thanks in advanceComment
-
Re: 32 inch lcd sound no picture
Can you take a picture of your meter please just help clarify things better.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: 32 inch lcd sound no picture
this is my multimeter.as i say i am new to this kind of operation i have repaired things like ghd cables ghd fuses iphone screens but there basicly taking things apart and replacing voltage troubleshooting is all new to me i do appreciate your help on thisComment
-
Re: 32 inch lcd sound no picture
so these are some pics as you can see in the inverter cable at the top of the mainboard not sure if that looks like a burnt cable second from the end,could that be the cause? as you can see there is no way to test the inverter while its connected to the mainboards as it is under the main chasse.i took a picture of the old inverter i pulled out.can i check voltage from mainboard to inverter from that inverter cable at the top of the mainboard.once again any help is appreciated.Comment
-
Re: 32 inch lcd sound no picture
took the plug out of the socket and the pins on the mainboard are fine as are the clips inside the plug.is there a way to cut that burnt looking cable back and reinsert it into the plug.looks like its hanging on by a thread.Comment
-
Re: 32 inch lcd sound no picture
To test that cable simply set your meter to ohms and the probe on one end of the wire and on the pin out on the bottom of the inverter and see if the ammount of ohms changes this will show if there is a connection or not make sure the set is off, also pull the wire block out of the connector and inspect it physically then resolder it if it is loose.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: 32 inch lcd sound no picture
Ok now put the inverter back in and set your meter to 20-200v dc then put the black probe to a ground then use the red probe to see if there is a voltage going though the connectors to the inverter while the set is on, can you get the model numbers of the psu ect and I will find a pin out diagram and show you where to test.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Comment
-
Re: 32 inch lcd sound no picture
Can you take a picture of the sceen with the set on so we can see if the backlights are on or not.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: 32 inch lcd sound no picture
so the problem with this tv is that from a cold start it would work for like an hour then loose picture but not sound with scart,tried svideo yesterday and the same.got sky hd plugged in today and its been going for 3 to 4 hours and hasnt lost picture yet.gonna leave it plugged into the sky hd all night and i will report back if it does loose picture.i plugged it into the sky hd to try and get a picture that reecey requested when it does loose picture but as i say its been going 3 to 4 hours on a hd connection with no loss of picture.Last edited by gobby009; 10-30-2014, 10:49 AM.Comment
-
Re: 32 inch lcd sound no picture
So those Voltage readings on the inverter connector as shown when the backlights are not on?
https://www.badcaps.net/forum/attach...2&d=1414623817Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
Related Topics
Collapse
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?by Tynan DillI was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming...7 Photos -
by m1ch43lzmHi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
by TR103Hi, I have a Samsung UE50TU with:
- sound and backlight, but no picture
- when it arrived, it had a picture for a few seconds
- it keeps rebooting
- without ribbon cable between the two panel boards, it does not reboot but I have no picture
- without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
- when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.
- without cable between mainboard and lcd panel and with a jumpered... -
by slimmy182Hello, I bought this Mac from a friend, he said that it simply stop working. The MacBook looks very clean but does not power on, stuck on 5v 0.42A, and sometimes display 5V and 0A (then 0.071A and again 0A).
I opened it looking for some problem, it was not touched before for sure and the board is very clena, no spot of corrosion at all from what I can see. Voltage on multimeter of the board off the case it's the same, 5V 0.42A. But then I noticed this "clicking sound" come from the board ( I attached here the audio file).
Looking on google I found this:... -
by IerwinHello everyone,
Ive got a UE60KU6079 on the workbench that is giving me some headaches trying to troubleshoot.
The previous owner stated that there had been white dots on the screen which from the description sounded like some lenses fell of the backlight LEDs.
He had opened the TV from the back, trying to get to the backlight, supposedly gave up, reassebled everything and gave the TV to me.
I expected the worst like ripped COF cables or a cracked panel but could not find anything like that yet.
Anyway I still fully expect that there has been something seriously damaged... - Loading...
- No more items.
Comment