Hello.
for rewrite nandflash you need programmer.
for usb upgrade : https://yadi.sk/d/YY_0QmW3sezsDg
sorry my english
-
Re: 17mb60-4 firmware
Hello.
for rewrite nandflash you need programmer.
for usb upgrade : https://yadi.sk/d/YY_0QmW3sezsDg
sorry my english
-
Re: 17mb60-4 firmware
Hi arizanotlari. I have a JVC LT-40C860 uhd led tv Mainboard 17MB120 It is in a
boot cycle and I think the nand is corrupt the JVC logo comes on in a constant loop. I have searched the net but cant find the software files to restore as explained in the 17MB120 chassis pdf.
1. mb120_en.bin, RomBoot.bin, PM51.bin and usb_auto_update_G6F.txt documents should be copied directly
inside of a flash memory (not in a folder).
2. Insert flash memory to the TV when TV is powered off.
3. While pushing the OK button in remote control, power on and wait. TV will power-up itself.
4. If First Time Installation screen comes, it means software update procedure is successful.
Any thoughts? If I could get a nand dump It might work alsoLeave a comment:
-
-
Leave a comment:
-
Re: 17mb60-4 firmware
Does anyone have 17mb70-5p firmware for sharp Lc40LE511E. I have got it to boot but doesn't recognise remote or touch panel.
Had to heat cpu to get boot would a reflow cure the remote problemLeave a comment:
-
Re: 17mb60-4 firmware
please up load firmwares you have in zip file with extra infoHello, I have a big thing to ask you, have a lcd tv, ALBA LED16911HD that has software problems, motherboard is Vestel 17mb60-4 I tried several versions of software toshiba, sharp, but the software image is negative, or divided into four parts, it seems that the problem is due to the 16inch display resolution, 720p, mounted on the tv, I'm interested in a firmware that contain rules bg dk UHF VHF VHL, thank you and please excuse my English, I use e Translate goo ...
iuliantv@yahoo.com
Please put these into zip file with a text file holding info
Info need
Make of set
Model number
Board number for instance 17mb60-1 or 17mb61 or 17mb70
Screen type and part number
Product Code on the back Label for instance 37654321Leave a comment:
-
Re: 17mb60-4 firmware
vestel tech note for mb70
so works on mb60 mb61 and mb70
also note this need P+ button instead of ok button on remote
so best to try both if trying to upload file
if OK button not work try again with P+ buttonLast edited by FIXITNOW; 11-04-2014, 05:59 AM.Leave a comment:
-
Re: 17mb60-4 firmware
usb stick 17MB60 to cure Flashing Front LED fault which is now getting very common
Could all members do this when they see one of these sets
This is how to
Plug empty USB Stick in to usb port (must be empty else will try coping file from stick into tv !!)
Switch on set Access hidden Menu by
Pressing MENU button then 7935
select
Copy NVRAM data
You should get 2 to 7 bin files maybe more
Please put these into zip file with a text file holding info
Info need
Make of set
Model number
Board number for instance 17mb60-1 or 17mb61 or 17mb70
Screen type and part number
Product Code on the back Label for instance 37654321
If you get a working set saving this will help otheres with Flashing Front LED fault
To save a set to your tv copy correct file to usb stick plug into turn tv on via mains while holding down ok button on remote
Remember Data is unique per ModelLeave a comment:
-
Re: 17mb60-4 firmware
What kind of lcd panel is there in your set.
CMO, AUO or LG ?
No DVD ?
There is a label on the rear with modelname
and bar-codes.
Obove the the codes there are numbers.
Perhaps one with 18 numbers .
There are no method for extracting the softwareLeave a comment:
-
Re: 17mb60-4 firmware
maybe someone knows a method for extracting functional software on a TV without the need to remove the flash memory on the motherboard, through RS232, JTAG, USB. all the bestLeave a comment:
-
Re: 17mb60-4 firmware
thank you for clarification, I complemented location, same motherboard uses the same 16-inch LED display and TELETECH 16912, Saba 1600jc , Telefunken TE16912B17, Vestel 16vh3021,and do not think that I am alone, all the best
Last edited by iuliantv; 10-03-2014, 11:20 AM.Leave a comment:
-
Re: 17mb60-4 firmware
Please update your info and dont make your email public. firmware for unknown brands is always hard to find, i wish you luck in that.Leave a comment:
-
17mb60-4 firmware
Hello, I have a big thing to ask you, have a lcd tv, ALBA LED16911HD that has software problems, motherboard is Vestel 17mb60-4 I tried several versions of software toshiba, sharp, but the software image is negative, or divided into four parts, it seems that the problem is due to the 16inch display resolution, 720p, mounted on the tv, I'm interested in a firmware that contain rules bg dk UHF VHF VHL, thank you and please excuse my English, I use e Translate goo ...
Last edited by SMDFlea; 03-20-2023, 11:22 AM.
-
Hello to everyone ,
This is my first post here, and i would like to share with you a small story in case you can help me.
Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.
All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work
I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help...02-10-2024, 02:07 PM -
Hi,
I have an Anker SoundCore 2 (A3105) that I saved from the trash (well, I guess there's a reason why it was supposed to go into the trash...). The problem is that it always turns off after a few seconds (sometimes it stays on a bit longer, between 30 and 60 seconds, but it still turns off). The power light turns on and the bluetooth light starts blinking, but both abruptly turn off again. The "turn off sound" is still played after the lights turn off. Sometimes, it also loops the on-off cycle several times without me pressing any buttons. If I connect an AUX cable, music...Yesterday, 02:14 PM -
Hi guys.
I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.
So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
Got New chip and writes good.
THE PROBLEM...
It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.
Does anyone have a Good Firmware I can have?... -
Hello Badcaps Community,
I purchased a preowned AOC monitor that is not working and out of warranty. It was sold as not working. I am looking for guidance on self-repair. In particular, I am after the firmware for the monitor. At the end, I have included monitor model information and links to pics and vids of the issue.
The problem is that it will not display a picture on any of its inputs. And the on-screen menu does not appear. The power button works properly. It powers on with the remote as well. But the on-screen menu does not appear, even when not connected to any... -
Hello,
I hope this message finds you well. I wanted to share a recent experience I had with a laptop that had a Type-C Port issue, specifically related to a PD (Power Delivery) controller problem. After replacing the damaged PD controller chip with a new one I purchased from AliExpress, the laptop now charges properly and negotiates power as expected, allowing the device to power up. I've replaced this chip twice just in case.
However, it seems that the laptop's BIOS is detecting an older version of the PD Firmware on the newly installed chip. As a result, it attempts...
Leave a comment: