Re: JVC LT-32A61SU bad picture
Or could it be noise in the picture as the service informations said...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: LCD TV and Monitor basic troubleshooting guides
To all Samsungs fans
Call Center_2012 Model Training
[url]http://s000.tinyupload.com/?file_id=31182561998826677518[/url]Re: LCD TV and Monitor basic trouble...26677518[/url]
Leave a comment:
-
-
Re: Samsung Un55h800af no pic , curved tv
Found nothing on H8000, but on H6500 there is a note
that you could remove the cable, pretty sure you could even do it on 8000...
Leave a comment:
-
Re: Samsung Un55h800af no pic , curved tv
Be very careful if you put it down.
If you see nothing with the flashlight,
you could check the t-con first with mute 369 mute....
Leave a comment:
-
-
Re: 52" RCA CRT Rear Proj ITC222 or ITC222a
This manual is from a Thomson 52" ptv.
OK button should activate the grid pattern....
Leave a comment:
-
-
Re: Sharp Aquos LC-52LE700UN No Sound No Picture
If it blinks it means that the mainboard is ok
You have tried “VOL (–)” and “INPUT” keys at a time,
and plug in the AC cord of the main unit to turn on the power.
Sure you got the right keys on the front ? Nothing.
Try this "channel DOWN and volume UP" and plug in the AC cord of the main unit to turn on the power.
Software problem ?
Leave a comment:
-
Re: Sharp Aquos LC-52LE700UN No Sound No Picture
This RUNTKA611WJQZ is for LC-52LE700 and 52LE600 european and russia market
The manual should be the same.
Lots of protections in the set so if there is no error codes
it could perhaps be the software.
Does the "heart beat indicator" blinks...
Leave a comment:
-
Re: TC-P50VT20 10 Blink Code
Perhaps number of case could give a hint...
Leave a comment:
-
Re: Panasonic TX-P42U30B Service Manual
Someone who is interested?
Something to read in the weekend...
Leave a comment:
-
Re: Quadro tft 37kl25 hd
Had a PW20 that went to standby after about an hour.
It was ic807 which was temperature sensitive.
Leave a comment:
-
-
Re: Samsung un40f6300 power issue
Many "Power Fail Count" so it seems to be problems with the PSU.
As you said many have had their PSU replaced.
As you also said it could work randomly,
so I have checked the connector CNM803 to see that there is no
poor connection....
Leave a comment:
-
Re: Samsung UN40F5500AF No back light
If the LED backlights do not illuminate,
disconnect the cable between the Main Board and the SMPS.
Perhaps this could help you....
Leave a comment:
No activity results to display
Show More
Leave a comment: