Matsui M32LW409 no picture but sound

[ReeceyBurger123]

Re: Matsui M32LW409 no picture but sound

So did you ever sort the tv ?

[Andyd1970]

Re: Matsui M32LW409 no picture but sound

OK great advice, I see one on ebay for £5.99, so just ordered it, will update you once it arrives.

[tom66]

Re: Matsui M32LW409 no picture but sound

You should buy a URC3940 or URC3910 as a general purpose remote for future use, it will control any set when programmed properly.

I usually sell sets with no remotes with a URC3940 remote as it will operate all the important functions.

Can't guarantee a specific Vestel/Philips remote will work - as Vestel use different codes for Hitachi badged sets, they could also do the same for yours...

[Andyd1970]

Re: Matsui M32LW409 no picture but sound

Hi Tom,

I have searched everywhere and do not have any vestel or philips remotes, so if I just search on ebay for cheapest vestel remote control anyone of them will do?

Thank you

[tom66]

Re: Matsui M32LW409 no picture but sound

I do not think the T-con is causing this (unless it's the wrong T-con for this TV which I think is unlikely)
See what panel options you have in the service menu.

[Andyd1970]

Re: Matsui M32LW409 no picture but sound

Hi Tom,

OK Would it not be easier to just replace the TCON? or do you just think it is a setting issue? if so what settings an I looking at or adjusting

[tom66]

Re: Matsui M32LW409 no picture but sound

Hi TOM, The LVDS cable is nice a secure, I do not have a remote for the set can I still get access to service menu? what setting am I looking at adjusting/checking?

Any Vestel or Philips remote will work.
You WILL need a remote to access it.

[vinceroger69]

Re: Matsui M32LW409 no picture but sound

just looked andy at all my t cons i have sorry none that match at all.

[Andyd1970]

Re: Matsui M32LW409 no picture but sound

Hi TOM, The LVDS cable is nice a secure, I do not have a remote for the set can I still get access to service menu? what setting am I looking at adjusting/checking?

[tom66]

Re: Matsui M32LW409 no picture but sound

Check LVDS cable and setting in service menu (Menu-4-7-2-5)

[Andyd1970]

Re: Matsui M32LW409 no picture but sound

Hi, The TCON number is V315B3-C01

Thank you

[vinceroger69]

Re: Matsui M32LW409 no picture but sound

whats the part number of the tcon board? i will look to see if i have one in my spares pile.

[Th3_uN1Qu3]

Re: Matsui M32LW409 no picture but sound

Hmm. Looks like something else on that T-con is fried also.

[Andyd1970]

Re: Matsui M32LW409 no picture but sound

Hi Tom,

I fitted the two caps and replaced the fuse and I get a picture but see the attachments as it looks awful.

[tom66]

Re: Matsui M32LW409 no picture but sound

these would be OK
http://www.ebay.co.uk/itm/CAP-MLCC-2...item51bf2f7f8f

[Andyd1970]

Re: Matsui M32LW409 no picture but sound

http://www.ebay.co.uk/itm/YAGEO-PHYC...item2a32113721


Or I have a TCON from another make and model of TV that I could remove caps from assuming they are the correct value?

[tom66]

Re: Matsui M32LW409 no picture but sound

That is quite big.
Can you link to the YAGEO ones?

[Andyd1970]

Re: Matsui M32LW409 no picture but sound

Hi Tom,

Picture of the 16v 22uf cap, I have a 35v 22uf one as well. Or shall I do what I suggested in last post?

Thank you

[Andyd1970]

Re: Matsui M32LW409 no picture but sound

Hi Tom,

OK will do, but just a thought one of the caps fails when I use my ESR meter with it removed from the PCB, the other gives a reading of 18.54uf, ESR 0.02ohms. I have found on ebay YAGEO surface mount caps, 22uf 16volt, would they be better suited to replace the pair from the TCON or replace the one that indicates 18.54uf and one new 22uf 16volt one? or the ones I have that need to be in correct orientation?

[tom66]

Re: Matsui M32LW409 no picture but sound

Can you supply a picture of the capacitor