T-con Question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tom thumb
    Senior Member
    • Jul 2013
    • 66
    • USA

    #1

    T-con Question

    I can't find anything online so I'll ask here
    I have 2 cmo tcon boards v315b1-c01 and v320b1-c03
    What I want to know is if these are interchangable
    I know they are supposed to match up with panel numbers
    but these boards look identical the main cmo chip numbers are the same
    except for the last row of numbers that I assumed are lot or date codes.
    Is this chip programed for the differnt panels and therefore they are not interchangable or can i luck out and they would work.
    I have seen some tcon boards that had a smd resistor soldered on
    different pads for different sized panels ie 32 or 40- etc and so i thought
    that maybe these 2 boards are the same or am I just nuts and out of luck
    Attached Files
  • budm
    Badcaps Legend
    • Feb 2010
    • 40746
    • USA

    #2
    Re: T-con Question

    315 is for 31.50" LCD panel.
    320 is for 32.00" LCD panel.
    What is your panel sticker? 315 or 320?
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment

    • tom thumb
      Senior Member
      • Jul 2013
      • 66
      • USA

      #3
      Re: T-con Question

      Thanks for the info that is great to know.
      I am just keeping some boards as spare's since I salvaged them from tv's
      I get from a recycling place. these boards are in several brands of tv's
      so I thought it would be good to keep as a spare
      I might be able to use them in future tv's. I never thought about the exact panel
      size now I know that Thank you very much

      Comment

      Related Topics

      Collapse

      • x_orange90_x
        TCL 50S535 bad tcon or panel issue?
        by x_orange90_x
        Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
        03-29-2025, 11:02 PM
      • advant
        Driving a Sharp TCON/panel with a universal main board
        by advant
        This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

        I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
        02-03-2020, 12:25 AM
      • eccerr0r
        Sell or Shim Solar panels?
        by eccerr0r
        Well, due to my grid tie inverter not accepting high voltages, and the fact that the lions in my solar panels are 36V (72-cell) I think I need to stick with 72-cell.

        However I have a few smaller panels that are 36, 32, and two 30-cell. The 36 and 32 together run at 75% efficiency (and subtract more with additional inefficiencies) when running in parallel with the 72-cell panels. The kicker is that the two 30s... generate 0% power when connected in parallel(!)

        So now what to do with these small panels?

        I could sell them...

        Or I could shim them....
        03-29-2025, 01:07 AM
      • Hakuu
        LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
        by Hakuu
        Hi There,

        This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

        After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

        More Details

        TV Model - LG OLED77G1PUA

        Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
        07-12-2023, 02:37 PM
      • Daren87
        Sony 8K XBR-75Z8H White Screen Vertical Bars Tcon Code. Help NeededπŸ™
        by Daren87
        Hello everyone,

        I've recently been given a Sony 8k Z8H. It's got a white screen with two vertical black bars. At times it's given me the 5 blink Tcon code. Testing voltage on the Tcon I can see some low or missing voltage. I've done a basic visual check of cables and the COF. Not seeing anything obvious. The original Tcon seemed to have good caps until turning it over. On the bottom I found maybe 10 caps with both sides of the caps shorting to ground. I thought ok these caps and likely other components on the Tcon are shorted so let's try a replacement Tcon. I just received the...
        08-13-2023, 03:25 PM
      • Loading...
      • No more items.
      Working...