Lg 47lm860v 3d tv- no picture

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Diah
    Badcaps Legend
    • Feb 2013
    • 6421
    • Germany

    #61
    Originally posted by Longon
    Have flux in syringe, or should I try without first?
    i would sugust with out... but if you like to use it try use high pressure cold air to let it go via the chip down side

    Comment

    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12218
      • U.S.

      #62
      Originally posted by Longon



      Wow...I’ve been nothing but polite and accommodating, yet I encountered rudeness that was unnecessary and really perturbed me. This behaviour is not acceptable and gives the forum a bad image. I hope this is not your normal attitude. As someone new to forums, I’m still figuring things out, and it would have been more constructive to raise concerns respectfully. Communication can be tough, but respect should always be part of the conversation. I get comfort from Karma so I'll sleep soundly tonight...will you!!!
      I agree 1,000 percent, there is a problem here. HOPEFULLY someone in charge will correct it.

      Comment

      • Longon
        long
        • Jul 2025
        • 37
        • United Kingdom

        #63
        Click image for larger version

Name:	20250917_224402.jpg
Views:	37
Size:	665.5 KB
ID:	3727890
        Originally posted by Diah

        i would sugust with out... but if you like to use it try use high pressure cold air to let it go via the chip down side
        Hey Diah.....I followed your original instruction rather than over complicate things using flux. I used what we call masking tape and heated up the said chip what felt like ages...see attached.....maybe not long enough but started to worry a little, unfortunately no difference.
        Attached Files

        Comment

        • Diah
          Badcaps Legend
          • Feb 2013
          • 6421
          • Germany

          #64
          Originally posted by Longon
          Click image for larger version  Name:	20250917_224402.jpg Views:	0 Size:	665.5 KB ID:	3727890

          Hey Diah.....I followed your original instruction rather than over complicate things using flux. I used what we call masking tape and heated up the said chip what felt like ages...see attached.....maybe not long enough but started to worry a little, unfortunately no difference.
          this is nothings... heat not enough or time of heating are short... the whole should bean near to black color

          Comment

          • Longon
            long
            • Jul 2025
            • 37
            • United Kingdom

            #65
            OK I'll be a little more aggressive this time.....just was unsure whether to continue. learning as I go...

            Comment

            • Longon
              long
              • Jul 2025
              • 37
              • United Kingdom

              #66
              Originally posted by Diah

              this is nothings... heat not enough or time of heating are short... the whole should bean near to black color
              Attempt no.2........was there for so long my arm nearly fell asleep!! The temperature was not directly under the heat gun but close by..going to give it 30 min and I'll retry.
              Attached Files

              Comment

              • Longon
                long
                • Jul 2025
                • 37
                • United Kingdom

                #67
                Originally posted by Diah

                this is nothings... heat not enough or time of heating are short... the whole should bean near to black color
                Hi Diah..............Still no change matey!!

                Comment

                Related Topics

                Collapse

                • JJAAMM
                  SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
                  by JJAAMM
                  This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

                  Problem
                  TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
                  07-06-2023, 06:01 AM
                • Fly_Among_Stars
                  VIZIO E70-E3 Half picture with half TCON
                  by Fly_Among_Stars
                  Hi,
                  I have a VIZIO E70-E3.
                  Symptoms: Black screen, no picture, but LED backlights are working.
                  I probed the power board and voltages are as listed on the board.
                  Main board appears fine, too.
                  I believe the problem is either a bad T-CON board, or connection to LCD, or bad LCD.
                  There are two separate ribbon cables feeding the LCD.
                  If both are connected, the screen is black.

                  If only the ribbon cable that feeds the right side of the screen (when viewed from the front) is disconnected, the left side of the screen shows picture and...
                  04-24-2023, 08:20 PM
                • noisykid
                  Sony XBR-85X950G Gray horizontal lines and vertical picture shift diagnosis?
                  by noisykid
                  5.5 year old 85 inch Sony Bravia X950G started showing gray horizontal lines across the bottom of the screen and the picture shifts slightly vertically when it happens. The lines sometimes get bigger/smaller vertically and bounce back. See the video for the problem. It seems to be happening after it warms up after an hour or so. Happens regardless of source. Right now there's nothing but power cable connected and it's happening. We did hook up a new Nintendo Switch to our HDMI switching receiver today, and played for a while with no issues, but this problem didn't occur til a few hours later while...
                  12-30-2024, 07:15 PM
                • iglitare
                  Sony KD-75XF9005 grey Picture but Sound. TCON or panel?
                  by iglitare
                  Hi,

                  i want to repair a Sony KD-75XF9005 TV that initially only showed a grey picture.
                  Backlight seems to work, Sound (Setup menu after reset) works.
                  If i dissconnect the left FFC cable from TCON to panel i have half a screen on the right. If left cable is connected always only the grey screen.
                  Interchanged the cables, its always only the right side that is working. Always grey if left side is connected.
                  With my small knowledge i would think at least the cables are good.

                  Can this happen because of a bad tcon board?
                  Or is it always a bad/shorted...
                  09-04-2025, 07:13 AM
                • kca
                  LG 82UN8570AUD ~ TCON or PANEL?
                  by kca
                  Hello all ~

                  Hope this finds you well. This LG 82UN8570AUD (April 2021 model) 4K UHD television has full audio capabilities but video is compromised / problematic.

                  When I picked up this large LG tv it had a full black screen upon startup. Previous owner said it just went black one day. No popping sound or anything else of note.

                  I got the display to work by taping off several traces of the right-hand side ribbon cable on the TCON that leads from TCON to PANEL. However, despite dozens and dozens of attempts to find the right combination / range of traces taped...
                  08-31-2025, 06:38 AM
                • Loading...
                • No more items.
                Working...