Samsung UN55J6200AFXZA Splash Screen Comes up, goes out, screen flashes one time and won't turn off

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • JunkmanJimbo
    Senior Member
    • Mar 2017
    • 194
    • United States
    #1

    Samsung UN55J6200AFXZA Splash Screen Comes up, goes out, screen flashes one time and won't turn off

    Samsung UN55J6200AFXZA Splash Screen Comes up, goes out, screen flashes one time and then tv won't turn off.
    No picture. No sound that I can tell. Backlights are on and have been checked. Flashlight test no image on screen. I replaced the Eprom chip hoping that was the problem but nothing changed.
    Please help. Thanks in advance!
    Tags: None
    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12206
      • U.S.
      #2
      Had one of these models that did the same thing, a replacement mainboard fixed it.

        Comment

        • JunkmanJimbo
          Senior Member
          • Mar 2017
          • 194
          • United States
          #3
          Thank you for the quick reply nomoresonys. I will get a mainboard ordered. Thanks again!!!

            Comment

            • EazyBone
              Badcaps Legend
              • Jun 2023
              • 1342
              • United states
              #4
              If you turn it on and leave it for like 20-30 minutes some Samsungs will show a Samsung logo move across the screen like the old direct TV used to be. Told me it was main board before. Mine was a older QLED that did that.

                Comment

                • lotas
                  Badcaps Legend
                  • Jan 2016
                  • 4618
                  • Russia
                  #5
                  Problem with eMMC.

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • Ryan.man
                      Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                      by Ryan.man
                      Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                      My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                      This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                      02-04-2025, 12:23 PM
                    • reformatt
                      Macbook Air M2 A2681 Kernel panics after screen replacement
                      by reformatt
                      Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

                      It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
                      07-31-2025, 08:37 PM
                    • Scruit
                      Does the Oak OTI067 have a splash screen / initialization message at bootup?
                      by Scruit
                      tl;dr ... Question: Does the Oak OTI067 have a splash screen / initialization message at bootup?

                      More detail:

                      Working on "Uncle Sherman", my Mitsubishi MP-3200 386 from 1988. Before I start up old computers I have a process where I disassemble, test for shorts, visually inspect, capture EPROM images etc.

                      My T866II+ give me a "pins not detected" error on the EPROM from the Oak-based (OTI067 GPU but apparently a no-name card??) I assumed the EPROM was bad, ordered a replacement and figured I'd program a downloaded ROM image to it....
                      04-17-2022, 06:03 AM
                    • smic717394
                      iphone XS turns off when press on screen.
                      by smic717394
                      Hi,

                      I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                      07-25-2024, 10:16 AM
                    • Chrissygizmo
                      Samsung UE55JU6800K half screen dark
                      by Chrissygizmo
                      Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
                      I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
                      02-10-2025, 12:33 AM
                    • Loading...
                    • No more items.
                    Working...