Had no backlight. Tried another P.S. same. Jumpered back light on and screen lite up but no pic or sound. Main board is bad because it does not send backlight on command to P.S. No sound either. So is thee tcon and screen bad also?Screen colors move around a little
-
-
Re: Sony KDL46S5100 Screen or Main Board?
Sorry. Messed up using smart phone. -
Re: Sony KDL46S5100 Screen or Main Board?
Try disconnecting the cable to the T-CON board, but at this point it does sound like the main board problem because it is not sending the command signals to the power supply board.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Sony KDL46S5100 Screen or Main Board?
Pic of screenAttached FilesComment
-
-
Re: Sony KDL46S5100 Screen or Main Board?
So is this with forcing bL_ON and PS_ON?Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Sony KDL46S5100 Screen or Main Board?
YesComment
-
Re: Sony KDL46S5100 Screen or Main Board?
Main board gives the P.S. on command but no BL-on or dim.Comment
-
Re: Sony KDL46S5100 Screen or Main Board?
Hi Ltank. Did you ever get this issue resolved? I'm having the same problem.Comment
-
Re: Sony KDL46S5100 Screen or Main Board?
I have a KDL46S5100 with a slightly different issue, double images, mostly on the left side of the screen. I thought right off the bat, T-CON but I was wrong, would a main create this problem or is it a bad screen? It plays TV, it is just all double images.Comment
-
Re: Sony KDL46S5100 Screen or Main Board?
That sounds more like bad tab bonding.
https://www.badcaps.net/forum/showthread.php?t=37887
http://s807.photobucket.com/user/bud...?sort=3&page=1
https://www.badcaps.net/forum/showpo...&postcount=113Last edited by budm; 11-12-2014, 09:29 PM.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Sony KDL46S5100 Screen or Main Board?
After looking at your links I totally agree, I removed the aluminum frame and put pressure on all the tabs but couldn't change the look of the picture, I would love to fix it but I don't know how and I didn't want to tweak the screen for fear of breaking it so any suggestions? Is this an easy fix or should I just part it out and move on?Comment
-
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.
Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
Power Board Connector that goes to Main board
CN6401
Pin 01 NC
Pin 02 NC
Pin 03 "BL_ON": 0V
Pin 04 "N/C"
Pin 05 "STBY 3.3V": 3.5V
Pin 06 "GND": N/C
Pin 07 "AC_OFF"... -
ONN 100012588
Issue: No Power, Then Rebooting After Main Board Change
Short answer: replace main board and power board
Technical answer: replace main board and Q306 & Q307 on power board.
Long answer:
TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge.... -
For anyone interested just repaired this Sony Main board TV that had a 2 blink error code, the chassis is a RB2G which is common to quite a few different Sony models. The Ceramic 10uF 25V X7R 1206 capacitor C9114 was shorted which took the smd 2A 0603 fuse out F9101. This was powering the Buck converter TPS54332 which caused no 5V output from it.
See the attached picture of the locations of both components. I also attach the best service manual I found for this board for anyone else in a similar position of trying to repair this main board. It's not specific to the TV model however it gives...01-08-2024, 05:56 AM -
This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.
I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
Comment