Announcement

Collapse
No announcement yet.

LG OLE65C1 Stand-By issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    So I had the time to take my TV apart again. I soldered out C601 capacitor. I measured it. It was 720nF instead of 820nF. I ordered the spare parts but unfortunately I didn't get them yet, I was just curious how bad they are. As far as I understand these capacitors are for interference filtering. Do they really influence the power supply of the TV?

    Another note: Sometimes my TV's LED turns off and only comes baxk, if I unplug it from the wall for a few minutes. Does it make the capacitors more suspicious?

    Thanks for the answer!

    Comment


      #22
      LED turns off and only comes baxk, if I unplug it from the wall for a few minutes
      remove the comma... :-)

      820nF minus 20% of tolerance is less than 720nF, so i think the problem is not there.. a filter is important when the input is dirt, when it is not i guess is irrelevant for the set, if

      Comment


        #23
        Originally posted by Titus6 View Post
        So I had the time to take my TV apart again. I soldered out C601 capacitor. I measured it. It was 720nF instead of 820nF. I ordered the spare parts but unfortunately I didn't get them yet, I was just curious how bad they are. As far as I understand these capacitors are for interference filtering. Do they really influence the power supply of the TV?

        Another note: Sometimes my TV's LED turns off and only comes baxk, if I unplug it from the wall for a few minutes. Does it make the capacitors more suspicious?

        Thanks for the answer!
        Hi Titus6, did you ever find the faulty cap?

        Comment


          #24
          Hi Nousernameavailable!

          No I didn't. Right now I'm just dealing with my TV as it is. Still working, sometimes I have to
          unplug it from wall socket and connect it again.

          I spoke with a local LG service not far from me, but I didn't take my TV to them yet. They said in the phone that according to my symptoms they guess my Main Board is the problem, but they have to investigate it in person. Unfortunately they don't come to my house, I have to deliver my TV to the service. Since it's a pain in the ass I only take the TV to them if my symptomps getting worse.

          Long story short, no solution yet

          Comment


            #25
            Originally posted by Titus6 View Post
            Hi Nousernameavailable!

            No I didn't. Right now I'm just dealing with my TV as it is. Still working, sometimes I have to
            unplug it from wall socket and connect it again.

            I spoke with a local LG service not far from me, but I didn't take my TV to them yet. They said in the phone that according to my symptoms they guess my Main Board is the problem, but they have to investigate it in person. Unfortunately they don't come to my house, I have to deliver my TV to the service. Since it's a pain in the ass I only take the TV to them if my symptomps getting worse.

            Long story short, no solution yet
            Ok thanks for the reply anyway. I found some more info in another (German) forum https://www.repdata.de/wbb2/forum/in...t-das-netzteil
            I'm going to try replacing C601 + C602 with Würth 890324025047CS.

            Comment


              #26
              I changed the caps and all is well again 👍

              Click image for larger version

Name:	20250513_115518.jpg
Views:	21
Size:	1.34 MB
ID:	3637209

              Comment


                #27
                Originally posted by Nousernameavailable View Post
                I changed the caps and all is well again 👍
                why you linked external answer and in this threat the answer was there post #3 ?!

                Comment


                  #28
                  Originally posted by Diah View Post

                  why you linked external answer and in this threat the answer was there post #3 ?!
                  My bad, I read so many posts I lost track

                  Comment


                    #29
                    Originally posted by Nousernameavailable View Post
                    I changed the caps and all is well again 👍

                    Click image for larger version

Name:	20250513_115518.jpg
Views:	13
Size:	1.34 MB
ID:	3637209
                    Thank you for letting us know your results. As Diah mentioned he already suggested this solution in this thread. I also ordered the same Würth cap and I will try it as well.

                    Hope it solve my issue too.

                    Comment

                    Working...
                    X