lg lcd 32 shaddow on screen

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • adamp91gvm
    Badcaps Veteran
    • Jan 2014
    • 699
    • uk

    #1

    lg lcd 32 shaddow on screen

    Any one any idea how to get rid of these shaddows
    Attached Files
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 30950
    • Albion

    #2
    Re: lg lcd 32 shaddow on screen

    i call that "bruising",
    it's caused by pressure damaging the glass sandwich afaik.
    i'v also seen what looks like a liquid-stain in one corner once that i think is caused by ecessive heat.

    i dont think you can fix it.

    Comment

    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK

      #3
      Re: lg lcd 32 shaddow on screen

      I've had a few like that from my experience it cannot be fixed.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment

      • adamp91gvm
        Badcaps Veteran
        • Jan 2014
        • 699
        • uk

        #4
        Re: lg lcd 32 shaddow on screen

        Dam just made it work it would not turn on

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK

          #5
          Re: lg lcd 32 shaddow on screen

          For future reference would you share what you did to make it work?
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment

          • adamp91gvm
            Badcaps Veteran
            • Jan 2014
            • 699
            • uk

            #6
            Re: lg lcd 32 shaddow on screen

            Yer it was only a cap change so did not think it was worth it swollen caps

            Comment

            • tom66
              EVs Rule
              • Apr 2011
              • 32560
              • UK

              #7
              Re: lg lcd 32 shaddow on screen

              Was it a 32LC5D or 32LC7D?
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

              Comment

              • adamp91gvm
                Badcaps Veteran
                • Jan 2014
                • 699
                • uk

                #8
                Re: lg lcd 32 shaddow on screen

                32lc46

                Comment

                • tom66
                  EVs Rule
                  • Apr 2011
                  • 32560
                  • UK

                  #9
                  Re: lg lcd 32 shaddow on screen

                  Ah KK, yeah, same generation as the 5D/7D.
                  I had a 42LC46 with bad caps and it had no screen issues... guess it's just bad luck.
                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                  Comment

                  Related Topics

                  Collapse

                  • Ryan.man
                    Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                    by Ryan.man
                    Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                    My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                    This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                    02-04-2025, 12:23 PM
                  • smic717394
                    iphone XS turns off when press on screen.
                    by smic717394
                    Hi,

                    I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                    07-25-2024, 10:16 AM
                  • Chrissygizmo
                    Samsung UE55JU6800K half screen dark
                    by Chrissygizmo
                    Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
                    I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
                    02-10-2025, 12:33 AM
                  • spice_disc
                    Vizio TV M50-C1 reboot cycle and static on screen
                    by spice_disc
                    I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

                    The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
                    09-08-2024, 02:37 PM
                  • ipatch
                    ipad pro 9.7" blew a SMD component while replacing the screen 🤦‍♂️
                    by ipatch
                    i have an ipad pro 9.7" (1st gen) A1674 where i replaced the screen, but never attached the screen to the frame/chassis (glued down) due to the ipad being previously dropped so the new screen would never fit in the frame properly. so i need flex/bend the chassis to eventually fix the new screen in properly. so i temporarily just applied blue tape around the edges of the screen to keep it in place. when watching videos with the ipad the screen started flicker, so i though maybe the new quasi cheap amz screen i purchased was going out. so i disconnected then reconnected with power still on,...
                    08-24-2024, 02:36 PM
                  • Loading...
                  • No more items.
                  Working...