KDL-40S4100 lcd help please

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dchang0
    Member
    • Jun 2014
    • 33
    • USA

    #41
    Re: KDL-40S4100 lcd help please

    I used ShopJimmy's online store to deduce that the KDL46S4100 main board I got is most likely part number 1-857-092-21 (not the alternative 1-857-092-41). The System Firmware value of "V1.021,V1.008P" has the "21" in it (presumably the 1.008P is the actual version, which does match what the main menu says and which is older than the newest 1.115). Also, the serial number reported in the factory service menu is in the correct range for the 1-857-092-21 board.

    Thus, I can deduce from ShopJimmy's store that the LCD panel that the main board is expecting is either the 46" LTY460HB10 or LTZ460HB10. There is no cross-reference anywhere I can find that shows what "LCD_AU037_1920" translates to, so I still cannot tell for sure whether the "Panel Version: LCD_AU037_1920" shown in the factory service menu is the LCD panel that the main board DETECTS that it's attached to or EXPECTS to be attached to.

    Comment

    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK

      #42
      Re: KDL-40S4100 lcd help please

      LTY460HB10 = Samsung 46" FHD Panel
      LCD_AU037_1920 = AUO 37" FHD Panel
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment

      • dchang0
        Member
        • Jun 2014
        • 33
        • USA

        #43
        Re: KDL-40S4100 lcd help please

        Thanks, tom66!

        Whoa, that's crazy! Then the 1-857-092-21 board from a 46S4100 somehow got configured with "Panel Version: LCD_AU037_1920" even though neither the 40S4100 nor 46S4100 has a 37" panel in it. I wonder what happened...

        It is probably safe to say then that the Panel Version is what the main board EXPECTS to be connected to and that it does not autodetect what it is actually connected to.

        Comment

        Related Topics

        Collapse

        • advant
          Driving a Sharp TCON/panel with a universal main board
          by advant
          This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

          I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
          02-03-2020, 12:25 AM
        • Awsmessymail
          Vizio E701i-A3 backlight only and now no backlight
          by Awsmessymail
          Hello all,
          I’ve tried to repair TVs in the past with some luck. Toms repair manuals got taken down and now thats a bit harder.
          I picked this TV up hoping for a quick fix. When the TV would power on, only the backlights would come on. The owner told me they heard loud screeching before it shut off. This alone makes me want to think the main board has an issue.
          As I researched, I found the TCON/driver boards were an issue on this unit. I went in troubleshooting the TCON but found good voltages on the TCON. I followed shop jimmys guide to test the transistors and they seem okay....
          02-13-2024, 11:04 PM
        • maxim2511
          LG 55EC930V OLED - swich on swich of no screen
          by maxim2511
          My Oled Tv is 55inch tv, 3 days ago I notice that middle of the screen is getting warmer and on picture I have ghosting, missing red color. Color red was still displaying, but it was not so strong as corners of the screen and watching some movies makes me angry.
          Then I get an idea to take it apart and clean boards from dust.
          In side of Tv was not so bad, I take compressed air in can, and gently blow up.

          Also I was thinking to styrofoam sponge to isolate power board from screen that the middle of the screen will not worm so much. Because Led on screen when gets higher...
          05-14-2021, 02:21 AM
        • EthanMai
          DELL INSPIRON 15 3501 LA-K035P MAIN+EC (The startup is very slow, please help me cleaning,Thanks)
          by EthanMai
          DELL INSPIRON 15 3501 LA-K035P MAIN+EC
          SN : CNXRSD3
          LA-K035P
          The startup is very slow, please help me cleaning
          Thanks...
          07-22-2024, 07:07 PM
        • x_orange90_x
          TCL 50S535 bad tcon or panel issue?
          by x_orange90_x
          Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
          03-29-2025, 11:02 PM
        • Loading...
        • No more items.
        Working...