LG OLD55CX6LA TCON Short - Help Identifying Component

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • spookt
    New Member
    • Apr 2022
    • 4
    • United Kingdom

    #1

    LG OLD55CX6LA TCON Short - Help Identifying Component

    Hi Folks

    I've got a friend's LG OLED on the bench (well the dining table given the size of it!). It immediately powers off when turned on and sits in standby. PSU voltages are good and after disconnecting the TCON board there is stable 12V and 22V coming out of the PSU board.

    Hunting around the TCON board there appears to be a shorted power rail (DVDD09_CORE) but I'm having issues identifying the component which is shorted. I've attached a picture. It's sitting before the coil so I'm assuming it's a MOSFET of some description, but the markings I can make out don't seem to match up. Under the scope it's marked 2J = L2M. I can't easily find anything with that designation. I know I can buy a 2nd hand TCON board for cheap, in fact I have one coming, but it annoys me that I'm potentially going to junk a perfectly good card for the sake of a $1 part.

    The TCON part number is 6870c-0852A.

    Any clues?

    Thanks!

  • Diah
    Badcaps Legend
    • Feb 2013
    • 6355
    • Germany

    #2
    did you make the test on the IC U21 while the panel disconnected from T-CON?

    Comment

    • R_J
      Badcaps Legend
      • Jun 2012
      • 9534
      • Canada

      #3
      U21 seems to be a Richtek RT6257BHGJ6F

      Comment

      • Davi.p
        Hobbist Tech
        • Sep 2009
        • 4281
        • Italy - Milan

        #4
        be clear... what strange noting is 2J = L2M? Have you added "="?

        the tv model seems wrong..

        Comment

        • adamok7
          Member
          • Feb 2023
          • 19
          • Kazakhstan

          #5
          Originally posted by R_J
          U21 seems to be a Richtek RT6257BHGJ6F
          You are 100% right.

          Comment

          • lotas
            Badcaps Legend
            • Jan 2016
            • 4512
            • Russia

            #6
            Originally posted by Davi.p
            be clear... what strange noting is 2J = L2M? Have you added "="?

            .
            Everything is correct, you need to know the labeling of the manufacturers.
            Attached Files

            Comment

            • spookt
              New Member
              • Apr 2022
              • 4
              • United Kingdom

              #7
              Thanks for everyone's help! Definitely wouldn't have got there on my own!

              Originally posted by Davi.p
              be clear... what strange noting is 2J = L2M? Have you added "="?

              the tv model seems wrong..
              Yes, apologies - I missed a D from the model number should be OLED55CX6LA

              ​Cheers

              Comment

              • Repairtechlcd
                Member
                • Nov 2013
                • 12
                • Malta

                #8
                Did you desolder the I.C to confirm that it's s/c and not some other component.?

                Comment

                Related Topics

                Collapse

                • Tynan Dill
                  Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                  by Tynan Dill
                  I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                  Upon bringing it home and plugging it up, it showed a standby light.

                  I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                  The screen seems to blackout and stay black, but with a flashlight I can see the display.

                  With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                  Assuming...
                  11-22-2024, 01:46 PM
                • advant
                  Driving a Sharp TCON/panel with a universal main board
                  by advant
                  This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

                  I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
                  02-03-2020, 12:25 AM
                • m1ch43lzm
                  HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                  by m1ch43lzm
                  Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                  Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                  05-12-2025, 08:37 PM
                • duwane
                  MacBook Air A2337 - 820-02016 - Stuck at 5v - Varying current draw - Board had short
                  by duwane
                  Hi All.

                  I have an 820-02016 board (A2337 M1) that has come in for data recovery. Reported as liquid damage, but no visible evidence of any liquid damage.

                  Board was initially stuck at 5v, and current only spiking occasionally to around 400mA and cycling.

                  After initial troubleshooting, found that C7800 (which feeds the power rail PP5V_BSTLQ_VOUT_SPMU) was dead short to ground.

                  Replaced C7800 and short gone. Board still stuck at 5v. Current draw behaviour changed. It now spikes up for a second to around 100mA to 130mA, then drops down to...
                  10-17-2023, 07:48 PM
                • sfernandes
                  Sega Dreamcast NTSC-U Revision 0 Launch Unit GD ROM PCB Board Short
                  by sfernandes
                  Hi everyone,

                  Symptom: When I press the power button the power LED lights up for a second and the fan etc spins for a second then the unit turns itself off and will not do the same thing again unless I unplug the power cable for a few minutes then plug it back in otherwise if I just turn the power switch off and back on right after it comes on for a second it will not come on again unless like I said unplug the power cord for a few minutes then plug it back in.

                  What I have done to try to isolate the issue so far:

                  The system powers on and stays on with...
                  01-23-2023, 06:03 PM
                • Loading...
                • No more items.
                Working...