ok sir i will program and with sold the contacts if and i think my mainboard has someone problem and causes this result
-
-
sir lotas something other that i want to ask you
and the times that is going in the menu the tv i have control from the remote control for few seconds and goes in this menu like the photo
do you suspect something ? i want to say is meaning something this or is accidental ?Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
In Russian there is "No signal".Comment
-
ok so is accidental
the fact that when is going from logo and shows me the menu and after few seconds is stuck
is curious in your opinion or is the same as the fact that is stuck on logo ?Comment
-
Hey everyone,
I’ve got a MacBook Air A2179 that got some water damage through the keyboard. Now it powers on, shows the Apple logo, but just stays stuck there — no startup chime, no keyboard backlight, and no progress bar under the Apple logo.
When I try to boot into Internet Recovery (Option + Command + R), the mouse cursor is extremely slow and laggy — like when I lift my finger off the trackpad, the cursor keeps drifting slowly for a second or two.
I opened it up and found some corrosion around the LED driver IC area on the logic board. I cleaned... -
I just got this tv today and it's getting stuck on the wallpaper. When I first power it on it goes to the V logo, then a black screen for about 15 seconds, then a Chromecast error for just a few seconds, and then finally to a wallpaper. It stays frozen on this wallpaper and does not respond to anything on the remote besides power on/off. Likewise the buttons on the tv do nothing either (besides power). I did the "reset" by holding the volume down and input buttons together for 10 seconds. It showed a message at the top of the screen saying it was Wiping Data and would restart soon. After... -
Hi everyone,
I’m trying to bring a LG SK10Y soundbar back to life. Currently it is stuck in the “PLEASE WAIT” loop.
My conclusion so far is that something fails to boot fully, but it does start via eARC and can play perfectly good sound until watchdog shuts it down.
After dumping NAND with a T48 programmer, extracting with binwalk and exploring with Ghidra I think:- Kernel B is present, but no Kernel A. Is that normal?
- SquashFS A/B are present
- Bootloader is present
- UBI region is completely empty (only volume 0 / layout volume exists)
- No system.cfg,
11-13-2025, 03:19 PM -
Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.
It does power up when pressing the power button.
I already try the power button while plugin the plug with no result.
Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.
Could this be an PSU or eMMC issue ? -
Hi i need this bios it stuck in dell logo can help me
MB: starlord13 b 152641
SN: 5F50ZB2...
Comment