Re: Sceptre X32GV-Komodo Turns on but then turns back off, after logo, with some flic
If the 5V supplied to the main board is steady but the main board is not staying on, then the problem will be in the man board, but we need to find out if the 5V is OK or not first, then we will have to check and see if the main board also sends the command signals to the power supply board or not.
I cannot see all the labels for all the pins which is important info we need.
Re: Sceptre X32GV-Komodo Turns on but then turns back off, after logo, with some flic
OK, nothing on the main board either.
I will have to trace the connection on the bottom side of the power supply board next.
BTW, there are some 3-pin Voltage regulator ICs on the main board that you can do some Voltage testing to see if they are OK or not.
See the link on how to test them under my signature.
OK, nothing on the main board either.
I will have to trace the connection on the bottom side of the power supply board next.
BTW, there are some 3-pin Voltage regulator ICs on the main board that you can do some Voltage testing to see if they are OK or not.
See the link on how to test them under my signature.
Appreciate the help! I will try to test those and will let you know! Thanks
Re: Sceptre X32GV-Komodo Turns on but then turns back off, after logo, with some flic
I think my meter is messed up because I am not reading anything. My friend who did the capacitor change, measured the voltage while I was there and everything was reading correct. He said the board was working like it should. Brought it home, hooked it back up and now it just does a quick blue power light flash and nothing.
Comment