Samsung LCD LN46C670M1FXZA

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • JFur13
    Member
    • Jun 2013
    • 12
    • USA
    #1

    Samsung LCD LN46C670M1FXZA

    Hello all,

    I have a Samsung TV that when plugged in shows the standby light but will not power on. After searching through the forum I found the following thread with a very similar model and situation.

    https://www.badcaps.net/forum/showthread.php?t=28593

    Checking the model numbers on the power board and mainboard I followed the instructions given.

    So far I have performed the following steps.

    1. Visually inspected the capacitors, I have no visible bulges, leaks, or burns
    2. Replaced the fuses
    3. Disconnected the power cable from the power supply board to and powered on the TV which resulted in the backlight coming on
    4. Disconnected the cable from the main board to the T-Con board and powered on the TV which resulted in just the standby light again.
    5. I have red in multiple places that cutting the JP852, but I don't think this going to solve my problems.


    My question is as follows with the following symptoms does it pretty much rule out the capacitor issue and my solution is purchasing a main board.

    Thank you in advance for the help.

    Regards,

    Jake
    Attached Files
    Tags: None
    • truep
      Badcaps Veteran
      • Aug 2010
      • 373
      • USA
      #2
      Re: Samsung LCD LN46C670M1FXZA

      Cutting JP 852 fixes an issue where the backlight flashes on and off. as far as I know it is only the BN44-00201 series opwer supplies.

        Comment

        • JFur13
          Member
          • Jun 2013
          • 12
          • USA
          #3
          Re: Samsung LCD LN46C670M1FXZA

          Thanks Truep. That is what I had read for the most part as well and when the TV was working it was not an issue so I will leave it for now.

            Comment

            • johnboy1313
              Badcaps Legend
              • Nov 2012
              • 1959
              • USA
              #4
              Re: Samsung LCD LN46C670M1FXZA

              Originally posted by JFur13
              3. Disconnected the power cable from the power supply board to and powered on the TV which resulted in the backlight coming on

              My question is as follows with the following symptoms does it pretty much rule out the capacitor issue and my solution is purchasing a main board.

              Thank you in advance for the help.

              Regards,

              Jake
              Yes, main board. The backlights coming on when the main is disconnected is the confirmation.

                Comment

                • JFur13
                  Member
                  • Jun 2013
                  • 12
                  • USA
                  #5
                  Re: Samsung LCD LN46C670M1FXZA

                  Johnboy, thanks for the help. I have located a mainboard for it and will install it when it arrives and let everyone know how I make out.

                    Comment

                    • JFur13
                      Member
                      • Jun 2013
                      • 12
                      • USA
                      #6
                      Re: Samsung LCD LN46C670M1FXZA

                      Update: The motherboard finally came in after the UPS guy refused to leave it at my door twice. I got a chance after work to install it and we are back up and running good as new. Thanks everyone for the help in this thread and the original that set me on the right track!
                      I think I might have just found a new hobby as well!

                        Comment

                        • kevin-waterford
                          New Member
                          • Nov 2013
                          • 4
                          • USA
                          #7
                          Re: Samsung LCD LN46C670M1FXZA

                          I have the same set and get no picture or sound, the power light doesn't even light. I replaced the blown 6.3 fuse on the power board with exact match, plugged it back in and the fuse blew again. I don't see any capacitors that look bad but some are sitting crooked, what else should i look for?

                            Comment

                            • budm
                              Badcaps Legend
                              • Feb 2010
                              • 40746
                              • USA
                              #8
                              Re: Samsung LCD LN46C670M1FXZA

                              @KEVIN, that means it has shorted out components in the power supply board, you can try fixing it by troubleshooting it down to component level or replace the board, and hopefully the main board is OK.
                              Never stop learning
                              Basic LCD TV and Monitor troubleshooting guides.
                              http://www.badcaps.net/forum/showthr...956#post305956

                              Voltage Regulator (LDO) testing:
                              http://www.badcaps.net/forum/showthr...999#post300999

                              Inverter testing using old CFL:
                              http://www.badcaps.net/forum/showthr...er+testing+cfl

                              Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                              http://s807.photobucket.com/user/budm/library/

                              TV Factory reset codes listing:
                              http://www.badcaps.net/forum/showthread.php?t=24809

                                Comment

                                • kevin-waterford
                                  New Member
                                  • Nov 2013
                                  • 4
                                  • USA
                                  #9
                                  Re: Samsung LCD LN46C670M1FXZA

                                  where should i start looking? Nothing on the board looks like it has been cooked and i have tested the rectifier ( tested ok). Also, I unplugged all the connections from the board, installed another new fuse, plugged the power cord back in and it immediately blew the new fuse, so i tested the voltage on the live side of the dead fuse, i dont remember the reading but it was not higher than the 6.3A fuse.

                                    Comment

                                    • budm
                                      Badcaps Legend
                                      • Feb 2010
                                      • 40746
                                      • USA
                                      #10
                                      Re: Samsung LCD LN46C670M1FXZA

                                      @kevin, is your board also BN44-00201?
                                      Never stop learning
                                      Basic LCD TV and Monitor troubleshooting guides.
                                      http://www.badcaps.net/forum/showthr...956#post305956

                                      Voltage Regulator (LDO) testing:
                                      http://www.badcaps.net/forum/showthr...999#post300999

                                      Inverter testing using old CFL:
                                      http://www.badcaps.net/forum/showthr...er+testing+cfl

                                      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                                      http://s807.photobucket.com/user/budm/library/

                                      TV Factory reset codes listing:
                                      http://www.badcaps.net/forum/showthread.php?t=24809

                                        Comment

                                        • kevin-waterford
                                          New Member
                                          • Nov 2013
                                          • 4
                                          • USA
                                          #11
                                          Re: Samsung LCD LN46C670M1FXZA

                                          Bn44-00341b

                                            Comment

                                            • tom66
                                              EVs Rule
                                              • Apr 2011
                                              • 32560
                                              • UK
                                              #12
                                              Re: Samsung LCD LN46C670M1FXZA

                                              SCH available
                                              http://tgohome.com/ServiceManuals/?d...h=Submit+Query
                                              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                                Comment

                                                Previous template Next

                                                Related Topics

                                                Collapse
                                                • m1ch43lzm
                                                  HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                                                  by m1ch43lzm
                                                  Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                                                  Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                                                  05-12-2025, 08:37 PM
                                                • ohren
                                                  Upgrading a Samsung ue55nu7096u with logic board from an ue55ru7105k -- good idea?
                                                  by ohren
                                                  I hope this is the right forum to post in despite not technically being a repair, but still a question of swapping boards.

                                                  I thought I'd explore the possibility to upgrade an existing working Samsung ue55nu7096u with the logic board (and power board if needed) of a newer model (ue55ru7105k) of the same size and appearance (and resolution). The reason being I'd like the extra inputs of that board including component in, an extra HDMI port and bluetooth. Its panel is broken so I have no use for the board otherwise.

                                                  The models launched in 2018 and 2019 respectively....
                                                  09-08-2023, 05:24 PM
                                                • Document Archive
                                                  Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
                                                  by Document Archive
                                                  This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
                                                  09-07-2024, 05:50 AM
                                                • Nicktronic
                                                  Samsung Power Supply Board BN44-00874F
                                                  by Nicktronic
                                                  Hey everyone,

                                                  This power supply board is hard to find but there are repair kits available. This board had a blown fuse, FP801S, blown PFC MOSFET, QP802CS and ceramic cap, CP809. I replaced them with parts I already had and tested the rest of the parts that would've come in the repair kit and they were fine. I powered the board up on the bench expecting, in typical Samsung power supply board fashion, to see all my output voltages but, nothing. 0 volts on CNL801, CNM801 and CNT801. The only thing I have is 170vdc on the filter caps. No standby voltage either.

                                                  Anybody...
                                                  03-17-2025, 06:20 AM
                                                • valvashon
                                                  Samsung UN65KU6290F PS board blows fuses
                                                  by valvashon
                                                  Samsung UN65KU6290F (May 2017); received from local Buy Nothing group. Was listed as "just went dead" and they wanted it gone. I brought it home, didn't notice anything visually wrong with the power supply board, looked up the cost of a new one and that's about as far as it went. Family was tired of tripping on the foot of the set so I decided to dig in and repair or toss.

                                                  Can't believe that I didn't check it earlier but I found the main 8 amp fuse blown. Jumped across it with a 10 amp blade style fuse and you can see that it literally exploded inside the second I plugged...
                                                  4 Photos
                                                  11-27-2023, 01:09 PM
                                                • Loading...
                                                • No more items.
                                                Working...