So I picked up a 55 inch Sony Bravia 1080p 240hz 3d LED tv. The previous owner stated they tripped over the cord and it stopped working.
When I pulled it apart I saw that the power connector was bent and one pin pulled out. I straightened it out and it and reconnected it and it fired right up.
After it powered up I noticed a white bar and faded bar next to it. Screen shots attached.
When I pulled it apart I saw that the power connector was bent and one pin pulled out. I straightened it out and it and reconnected it and it fired right up.
After it powered up I noticed a white bar and faded bar next to it. Screen shots attached.
Comment