Hi all Happy Holidays! Was just wondering if you think this white vertical bar would be fixable. Maybe bad TCon or ribbon cable? Contemplating trading a 50 inch Hisense 4K Roku for the Samsung but might get burned lol. The Samsung is model QN65Q80AAFXZC QLED TV has a white vertical Bar. Any thought appreciated. Thanks.
-
-
I think she's dead. I'd be curious what others say but looks like panel short. Maybe something on buffer boards shorted?
Of course wait for another opinion -
please show us all boards from the tv... you have missing one channel video signal who knows and we don't see what insideComment
-
I don't actually have the tv ... I got an offer to trade a working tv for the Samsung with the vertical line. Just wanted to get some expert input from here. Yes I was thinking along the lines of what EazyBone says ... worst case scenario bad panel .. than I am out a good tv that I will have traded for the bad tv. And Diah is right too would be nice to actually see inside before doing a trade, but doubt the trader would go through that. So maybe is better to not take the risk and just forget the negotiation. Than again could be easy fix lol .. Ughhh hate these kind of choices. Thanks for the input everone.Comment
-
Difficulty: very hard to impossible.. not the better trade..Comment
-
Thanks for your input Diah, Davi.p.. if I understand correctly your advice is that you would not bother with this Samsung. I will take your advice ☺Comment
-
sorry, "not the best trade" i had to say.. some liquid got into the screen, and caused corrosion, i know works inside there takes very long and are not far relaxant, the biggest problem is the size of the beast..Comment
-
This specification for the Samsung 13.3IN CHROMEBOOK 2 8GB/128GB FHD QLED MERCURY GRAY I3-10110U Chromebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 13.3IN CHROMEBOOK 2 8GB/128GB FHD QLED MERCURY GRAY I3-10110U boardview and 13.3IN CHROMEBOOK 2 8GB/128GB FHD QLED MERCURY GRAY I3-10110U schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help...09-07-2024, 12:10 AM
-
This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...09-07-2024, 05:50 AM
-
I'm troubleshooting a Samsung LS28D590DS 28" 4K monitor which has white vertical banding in the center of the LCD panel. The image looks like it's distorted slightly as well in the middle. Am wondering if this could be caused by the panel, t-con board or the main board?
... -
TV: Samsung QLED QE65Q7FNAT
PSU: BN4400940A
MB: BN94-12832K
I got the tv in spring 2024. At that time it started, then ran 60 sec and poweroff. Seemed like reboot issue. I didn't have time and room to check it in summer so I plugged it in and now the standby light is on. I press button on remote, standby light goes off and tries to start?. No picture or backlight on LCD. I thought about removing diodes like in this thread: https://www.badcaps.net/forum/troubl...sung-qled-q60r... -
Hello everybody,
my TV has a problem. It keeps turning on and off. The speakers are still working, and I hooked up the TV to my PC, and it recognizes it as a Samsung device. I am able to get a stable backlight when I disconnect the cable(I believe it is called the LVDS cable) that connects the left lower board (which is connected to the "main board") and the right lower board. I have tried a taping method I saw on YouTube, where the CLK cables are taped off. In fact, I proceeded to figure out which pin I have to tape off in order to get a stable backlight. It doesn't matter...
Comment