Announcement

Collapse
No announcement yet.

Samsung LE40A699 picture problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    Re: Samsung LE40A699 picture problem

    Hi Slovenac
    Did You check the flat cable, is there any corrosion or damaged pin???

    Comment


      #22
      Re: Samsung LE40A699 picture problem

      "More update. If I unplug one of four connectors that go to lcd panel, turn on TV, turn TV off, and then plug that connector back, and turn on TV, then the picture is almost 100% good. Maybe some problem with power supply on T-con board?"
      That is aout the same symptom as the LG I worked on.
      https://www.badcaps.net/forum/showthread.php?t=19884
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

      Comment


        #23
        Re: Samsung LE40A699 picture problem

        I changed the capacitors in the power supply, just in case, but it's still the same. I can get it working if I turn on and off the TV, until the picture is ok. But when I turn it off, the picture is bad again. Any more ideas?

        Comment


          #24
          Re: Samsung LE40A699 picture problem

          If I buy a new T-con board, which one is compatible? This?

          Comment


            #25
            Re: Samsung LE40A699 picture problem

            The part number "FRCM_TCON_V0.1" must be the same and the t-con must have the same connectors/connections.
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            Working...
            X