hello, I have a Visio p50 HDTV20A and the bottom half of picture is yellow red with pink lines floating is my tv shot?? or can I replace a board of some sort?? any help would be amazing.
Announcement
Collapse
No announcement yet.
vizio p50 hdtv20a half screen pic if problem attached
Collapse
X
-
Re: vizio p50 hdtv20a half screen pic if problem attached
Just saying, if it were mine, that's the board I would replace.Last edited by cliff_hootarski; 03-22-2013, 07:03 PM.
Comment
-
Re: vizio p50 hdtv20a half screen pic if problem attached
Sorry, forgot the link:
http://blog.coppelltvrepair.com/2010...er-boards.html
And here is a video:
https://www.youtube.com/watch?v=51SZsfH60EY
Comment
-
Re: vizio p50 hdtv20a half screen pic if problem attached
I'm going to disagree. The picture doesn't go crazy at exactly half of the screen. Probably the upper buffer -- one lower IC failed -- meaning the chained signal is getting lost for the rest.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Comment
-
Re: vizio p50 hdtv20a half screen pic if problem attached
i have the p50 hdtv20a. one of the buffer chips on the upper buffer board was noticeably burnt out, but i couldn't see anything wrong with the ysus board. i replaced the bad buffer chip, now the tv powers on, but only the top 1/4 of the picture comes on. ideas?
Comment
-
Re: vizio p50 hdtv20a half screen pic if problem attached
Could be other buffer chips bad. The signal between each is chained, so if one goes bad the signal can get lost.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Comment
-
Re: vizio p50 hdtv20a half screen pic if problem attached
There are 4 buffer chips per board, and 2 boards. since the top 1/4 of the screen shows picture, i'm guessing the top 2 are working, but something with the lower 2 aren't chaining the signal correctly? and since they aren't chaining, they also cause the lower buffer board to malfunction?
Comment
-
Re: vizio p50 hdtv20a half screen pic if problem attached
What I'm saying is it's possible that there are additional chips that are failed. In this case I'd look at replacing either the second or third chip, most likely third, from the top.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Comment
-
Re: vizio p50 hdtv20a half screen pic if problem attached
Check if -Vsc and Vsch are OK. You may only be able to locate -Vsc.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Comment
Comment