Probably the main processor -- most likely needing a new board unless you have a scope to trace through everything!
People have the boards for sale for about £50.
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
yes ive tryed pressing that button its still the same,any other tests would be well appreciated. could it be the cable between the 2 boards main-control
Try holding MENU on TV plus MENU on remote at same time.
Doing the auto gen has ruled out all boards as good, except the main board.
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Well, damn, that's surprising. You get that faint static on most inputs though? A good portion of the main board is working if you can get OSD.
Try and see what's under SYSTEM CONTROL.
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
OK, I don't see a reset there, you'll need to look through all of the menus and try and find a reset option.
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Comment