NEC Px42VM3A lost all display

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #101
    Re: NEC Px42VM3A lost all display

    Can I see a picture?
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • Dblueman
      Senior Member
      • Nov 2012
      • 84
      • United States

      #102
      Re: NEC Px42VM3A lost all display

      if you lookup towards PH and PD connectors in slot L10 these are what I see
      Attached Files

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #103
        Re: NEC Px42VM3A lost all display

        They are inductors not fuses, should test shorted.

        What about that white ceramic resistor, how does it test & what does it say? Hard to see with focus, remember I do not have this board in front of me.

        I have only worked on a 50" NEC chassis and it was reasonably modern, PSU made by Hitachi, main board by NEC & rest of plasma screen made by Pioneer (ex-NEC manufacturing.)
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • Dblueman
          Senior Member
          • Nov 2012
          • 84
          • United States

          #104
          Re: NEC Px42VM3A lost all display

          G5W 47 OHM J micro 1DT

          Comment

          • tom66
            EVs Rule
            • Apr 2011
            • 32560
            • UK

            #105
            Re: NEC Px42VM3A lost all display

            Does it test at 47 ohm or nearabouts.
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • Dblueman
              Senior Member
              • Nov 2012
              • 84
              • United States

              #106
              Re: NEC Px42VM3A lost all display

              46.8 ohms

              Comment

              • Dblueman
                Senior Member
                • Nov 2012
                • 84
                • United States

                #107
                Re: NEC Px42VM3A lost all display

                I am greatful for the help. I know it is difficult when you don't have the PSU in front of you.

                Comment

                • Dblueman
                  Senior Member
                  • Nov 2012
                  • 84
                  • United States

                  #108
                  Re: NEC Px42VM3A lost all display

                  the 4 white resistors that show G5W 4.7 ohm Micro 1DT are reading only 3.6
                  these are up by the 1500uf 200V cap

                  Comment

                  • Dblueman
                    Senior Member
                    • Nov 2012
                    • 84
                    • United States

                    #109
                    Re: NEC Px42VM3A lost all display

                    lets visit again tomarrow or the day after that.

                    Comment

                    Related Topics

                    Collapse

                    Working...