I had a Westinghouse Ltv-32w6 given to me and was wanting to revive it.
First of all, I have followed budm helping lilmonk3 and have the same thing wrong
I do have the right voltages on the PS and have a back light but very dark
When I press the OSD a vertical band of garbled colors appear in the center and change in width every time I press the OSD
budm, if you help me, I have the right voltages to the T-CON FUSE1 and I'm asking if this confirms a bad T-CON board before I order one or is there other test I should make first
Thanks to all for any help
sprocket
First of all, I have followed budm helping lilmonk3 and have the same thing wrong
I do have the right voltages on the PS and have a back light but very dark
When I press the OSD a vertical band of garbled colors appear in the center and change in width every time I press the OSD
budm, if you help me, I have the right voltages to the T-CON FUSE1 and I'm asking if this confirms a bad T-CON board before I order one or is there other test I should make first
Thanks to all for any help
sprocket
Comment