26" Sharp LC-26DV22U LCD power problem.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • budm
    Badcaps Legend
    • Feb 2010
    • 40746
    • USA

    #41
    Re: 26" Sharp LC-26DV22U LCD power problem.

    Great! It has to be something in the circuits around those two transistors for the protection section that is not working right, we are in the right area. I wish I have the set in front of me to do deep analyzing.
    For now just use as it is with the kick start.
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment

    • GMAN884
      New Member
      • Nov 2012
      • 1
      • USA

      #42
      Re: 26" Sharp LC-26DV22U LCD power problem.

      New to badcaps. Was trying to find a schematic to be able to start work on the same model for a different situation. It is a coworkers TV and he asked me to give it a shot. With the schematic in this thread was able to get to work. Was quickly able to get to the problem. The switching regulator for T402 is inop. The surge absorber took a fatal hit also and am changing the AC input varistors as well. The set was off when a T-Storm with a few power surges came thru and the set did not work afterward. Have found replacement surge absorber and varistors at Digikey. Unable to find MIP2F4 in the Conus. Have found them on Ebay oveseas. Any insight to MIP2F4 being available anywhere in the US?

      Any insight appreciated.

      Comment

      • bluebear911
        New Member
        • Feb 2012
        • 2

        #43
        Re: 26" Sharp LC-26DV22U LCD power problem.

        Hi,

        I also have a problem with this board CEF273A. Plugged in, green led appears, relay make 1 click and that's it. No sreen no lights.

        I made some measures like in the pdf troubleshoot but are ok (IC401 IC402). I also measured D436 and D437 and makes 24v.

        What else can i test?

        Thanks...

        Comment

        • bluebear911
          New Member
          • Feb 2012
          • 2

          #44
          Re: 26" Sharp LC-26DV22U LCD power problem.

          The problem was at F404 12v rail....Now it's ok

          Comment

          Related Topics

          Collapse

          • theone111
            Problem with LG Plasma 60PM6700 - Random power downs
            by theone111
            I have an LG Plasma TV 60PM6700 for the past ~12 years.

            In the last ~3-4 months I have been having some issues.
            1. Problem: It started with random picture disappearing (sound still worked).
              Frequency: Happened about once a week.
              Solution: Had to turn off TV wait a few seconds before turning it on again.
            2. Problem: Then it got worse and the TV started to shut down and when turning on the no picture just sound.
              Frequency: Happened about once a week.
              Solution: Had to turn off TV wait about 10-20 seconds and turn it on again to solve.
            3. Problem: TV shuts down
            ...
            07-22-2024, 10:36 AM
          • Duranitron
            Asus x512dk rev 2.1 power on problem
            by Duranitron
            When I reflash again the bios of hoaca388 the unit powers on and the unit lives!!! Hooray!! All voltage in the coil 3.3v, 5v and 6.7v indicate charging are all present. including the cpu voltage , EEPROM and GPU voltage the unit is now alive, normal screen booting to windows and log in screen until I power it off. Then the unit never goes on even when pressing the power button in the keyboard.. Voltage reading 19v main , 3.3v VCC in IT8225E-128 and EEPROM VCC 0 volt and the charging voltage 0 volt.

            Try to trace the power switch button goin to the power switch IC PU8803 (APL3533AQBI-TRG)...
            11-26-2024, 10:22 PM
          • EazyBone
            LG OLED55C9PUA power problem
            by EazyBone
            Hello, trying to fix C9 55 inch. I have pulled the back and all looks completely normal with nothing burnt so far. This is first time attempting to fix a tv so any help is appreciated.

            Problem. I hit power button, red light on TV turns off and tries to turn on, no picture shows up and then shuts off. This occurred after house power turned on and off, not from a storm.

            I have tested the power going from power supply to main board, all 12v and 20 volt readings are proper when I hit power button.

            The power supply to t con is different story.
            This...
            06-23-2023, 07:43 AM
          • Dr.d
            Help please..Lenovo ideapad 5 14itl05 power and charging problem
            by Dr.d
            I have a lenovo ideapad 5 14itl05, board LA-K321P, That will only power up on Battery only, or with battery disconnected and power adapter only. If battery is connected and usb-c power plug connected. It only works on battery and will not charge. I can however force it to charge by connecting the battery from a disconnected state while the power USB c plug is powering the laptop.

            Additionally....to add to this strange situation. The usb-c power plug ONLY works to power the laptop on one side when inserted into the boards power usb c plug. If you rotate it 180 degrees, the board gets...
            04-05-2024, 11:48 AM
          • bscottjohnston
            Sharp LC-80UQ17U Power Supply Board problem
            by bscottjohnston
            I just picked up a Sharp LC-80UQ17U here in Denver on Craig's. The previous owner said he was watching it and "pop" it stopped. Opened it up to find a blown fuse on the high Voltage side of the PS. I bypassed it with a 7.5 Ampere automotive fuse and saw a flash in component NTC7001 (as the fuse popped). I am not going to try to apply any more power to the board until I can locate a schematic. Does anyone have the schematics to RUNTKB217WJQZ?

            ...
            02-17-2024, 06:03 PM
          • Loading...
          • No more items.
          Working...