any one can help me where can i buy this t-con
need t-con for sony klv-40w450a
Collapse
X
-
Tags: None
-
Re: need t-con for sony klv-40w450a
Part # on the T-con? Pictures? Anything?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search. -
Re: need t-con for sony klv-40w450a
Originally had a link in his post but did not leave a gap
http://flattvparts.co.uk/index.php?m...oducts_id=1093
Please update your profile with country and mains voltagePlease upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
-
Re: need t-con for sony klv-40w450a
This model is not sold in USA, so what country are you in.
Since SONY uses more than one maufacturers to supply the LCD panel, do you know if it is using SONY/SAMSUNG panel, AUOPTO panel, CHI-MEI panel?Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
-
Re: need t-con for sony klv-40w450a
So Asia/Pacific model, what is model of the LCD panel (e.g. LTA40...)Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: need t-con for sony klv-40w450a
What is wrong with the one you have got - put some pictures up and we can look at it. Have you tested the fuse?Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
Re: need t-con for sony klv-40w450a
yah A/P i already inquire the parts to oriss/ap but it supply end
hers the panel model LTY[Z]400HC02001Comment
-
Re: need t-con for sony klv-40w450a
hi sir selldoor the defect is white screen i already test all voltage/resistance/leakage etc.. its possible have defect on gamma control i.c but that i.c is much hard to find.. unlike other gamma i.c like as15 as04 as34 already avail in black market.. so i trying to look for hole control mt board shortly t-conComment
-
Re: need t-con for sony klv-40w450a
Fuse good? Supply 12V or 5V to T-con good?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: need t-con for sony klv-40w450a
yis sir all suply is good even the output of dc to dc converter i meashured it using scopeComment
-
Re: need t-con for sony klv-40w450a
Check good boost voltage... typically 15V.
Check good CORE voltage for T-con IC... typically 1.2V to 2.5V.
I see at least six LDOs on that board; all good?
Check the crystal and see if it's oscillating.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: need t-con for sony klv-40w450a
sir tom66 do u have idea where can i buy that t-con? any website or parts supplierComment
-
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: need t-con for sony klv-40w450a
Just to check - you did clean and reseat the connectors from the tcon to the panel? - have you checked out the cables- they can become brittle and broken due to age and heat. Perhaps update your profile with your country in case there are any members in your country who can assist with finding one.Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
Related Topics
Collapse
-
by Daren87Hello everyone,
I've recently been given a Sony 8k Z8H. It's got a white screen with two vertical black bars. At times it's given me the 5 blink Tcon code. Testing voltage on the Tcon I can see some low or missing voltage. I've done a basic visual check of cables and the COF. Not seeing anything obvious. The original Tcon seemed to have good caps until turning it over. On the bottom I found maybe 10 caps with both sides of the caps shorting to ground. I thought ok these caps and likely other components on the Tcon are shorted so let's try a replacement Tcon. I just received the... -
by thelankanguyThe TV shows a black screen with no image.
TCON ribbon connectors were disconnected individually for image and there was no half image even.
Later both ribbons were disconnected and TCON voltages were tested.
12V, 3.3V, 1.8V were seen present but VONE signal reads 0V.
There is also a short to ground in this circled inductor.
Is this a TCON issue or something else ?... -
by bbrainHi,
I have this problem with my Sony 55' AG9.
It flashes 4x.
I have found the service manual, and seems it is the TCON.
Before I buy a TCON can someone check the vid?
Thanks in advance!... -
by rimwallHi, hoping for some views on this one which I've not come across before. The TV generates an image that has 12 noticeable bands across it. The image is still there and accurate, but the colour (or perhaps the brightness) changes gradually across each band which creates a noticeable 'step change' at the edge of each band. Given it's a 4K TV with 2160 rows of pixels, I'm guessing the 12 bands correspond to 12 gate drivers of 180 rows each. If this guess is right, then perhaps:
a) all the gate drivers are malfunctioning the same way (which seems unlikely), or
b) the Tcon board is malfunctioning,... -
by x_orange90_xJust bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
- Loading...
- No more items.
Comment