37LG6000 replaced fuse but now cant change input or use remote

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • shepp
    Badcaps Veteran
    • Mar 2012
    • 377
    • England

    #21
    Re: 37LG6000 replaced fuse but now cant change input or use remote

    just retested and i can use the remote for about 2 seconds as the back light comes on and also the buttons, the white led goes from bright white to dim then it doesnt do anything, ive tried putting aerial in and a scart input and that does nothing either, and there isnt enough time to change the input to check if a picture shows up

    i have included 2 more pics, as you can see the menu comes up, but then freezes after a couple of seconds on start up, ill will check the voltage regulators tonight to see if there ok

    first picture is when switched on, then other pic is me pressing the input button on start up, i tried the power button thing....nothing happened...
    Attached Files

    Comment

    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK

      #22
      Re: 37LG6000 replaced fuse but now cant change input or use remote

      Might be corrupted firmware. Does TV have USB?
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment

      • shepp
        Badcaps Veteran
        • Mar 2012
        • 377
        • England

        #23
        Re: 37LG6000 replaced fuse but now cant change input or use remote

        yes it does but i cant find a firmware update or instructions from LG website

        i have managed to get it to tune DTV but it froze just after it got to 100%, so gonna try and get to factory reset settings if i can

        i have seen some firmware updates available to download but not from LG so wasnt sure if i should download it?

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK

          #24
          Re: 37LG6000 replaced fuse but now cant change input or use remote

          Originally posted by shepp
          yes it does but i cant find a firmware update or instructions from LG website

          i have managed to get it to tune DTV but it froze just after it got to 100%, so gonna try and get to factory reset settings if i can

          i have seen some firmware updates available to download but not from LG so wasnt sure if i should download it?
          LG service menu - Try pressing "OK" on remote while pressing "OK" on TV.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment

          • shepp
            Badcaps Veteran
            • Mar 2012
            • 377
            • England

            #25
            Re: 37LG6000 replaced fuse but now cant change input or use remote

            i got the firmware anyway, had to register on some polish website, but ill try that in a bit, then ill update the firmware and see what happens

            Comment

            • selldoor
              Slow Learner
              • Dec 2010
              • 7870

              #26
              Re: 37LG6000 replaced fuse but now cant change input or use remote

              I think I just mentioned the one voltage regulator but there are several on that same board
              one has the same number as 1001 but cant read the others.

              There are also fuses on the other boards as well as the power supply one you replaced - did you
              check them all.
              Last edited by selldoor; 08-12-2012, 11:09 AM.
              Please upload pictures using attachment function when ask for help on the repair
              http://www.badcaps.net/forum/showthread.php?t=39740

              Comment

              • shepp
                Badcaps Veteran
                • Mar 2012
                • 377
                • England

                #27
                Re: 37LG6000 replaced fuse but now cant change input or use remote

                Originally posted by selldoor
                I think I just mentioned the one voltage regulator but there are several on that same board
                one has the same number as 1001 but cant read the others.

                There are also fuses on the other boards as well as the power supply one you replaced - did you
                check them all.
                checked the ones i could see, and they were ok, but ill investigate further in about an hour, think the mrs needs to go somewhere

                Comment

                • shepp
                  Badcaps Veteran
                  • Mar 2012
                  • 377
                  • England

                  #28
                  Re: 37LG6000 replaced fuse but now cant change input or use remote

                  Just checked regulators 2 78R33 there ok, working ok, there is another 1 a 78R05 that's got 12v in but only 400mV out, and also the 400V on the power supply is only reading 275v

                  Comment

                  • tom66
                    EVs Rule
                    • Apr 2011
                    • 32560
                    • UK

                    #29
                    Re: 37LG6000 replaced fuse but now cant change input or use remote

                    Originally posted by shepp
                    Just checked regulators 2 78R33 there ok, working ok, there is another 1 a 78R05 that's got 12v in but only 400mV out, and also the 400V on the power supply is only reading 275v
                    What 400V regulator???

                    78R05 is probably the problem. I will check if schematics are available.
                    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                    Comment

                    • shepp
                      Badcaps Veteran
                      • Mar 2012
                      • 377
                      • England

                      #30
                      Re: 37LG6000 replaced fuse but now cant change input or use remote

                      I'm on my phone at the minute so can't look at the 78R data sheet to check output Mrs is on computer!

                      400v from PSU that goes to the other PSU is only reading 275v dc, not sure if that's gonna matter to be far if the back light is working and TVs powering up

                      Comment

                      • tom66
                        EVs Rule
                        • Apr 2011
                        • 32560
                        • UK

                        #31
                        Re: 37LG6000 replaced fuse but now cant change input or use remote

                        Yes, schematics are available - THANK you LG -

                        http://www.tgohome.com/ServiceManual...&Search=Submit

                        Schematics at end - 78R05 only powers "CI" slot for Freeview, and has ON/OFF control pin. Check ON/OFF pin is good. Even if it failed, it should only affect the CI slot not everything else.
                        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                        Comment

                        • shepp
                          Badcaps Veteran
                          • Mar 2012
                          • 377
                          • England

                          #32
                          Re: 37LG6000 replaced fuse but now cant change input or use remote

                          ye i see it shame....lol, thought id found some thing
                          Last edited by shepp; 08-12-2012, 02:06 PM.

                          Comment

                          • shepp
                            Badcaps Veteran
                            • Mar 2012
                            • 377
                            • England

                            #33
                            Re: 37LG6000 replaced fuse but now cant change input or use remote

                            right, i can get the right board i.e part number....but its from a 42" not a 37"

                            if i was to load the Firmware that i have for the 37" into the new board when it arrives would it work? or would i still need to go into service menu and make adjustments?

                            Comment

                            • tom66
                              EVs Rule
                              • Apr 2011
                              • 32560
                              • UK

                              #34
                              Re: 37LG6000 replaced fuse but now cant change input or use remote

                              Originally posted by shepp
                              right, i can get the right board i.e part number....but its from a 42" not a 37"
                              It might work fine. You may need to change panel settings. However, you cannot guarantee it will work perfectly.

                              I don't know if you'd need to swap firmware (I'd doubt it); but if you did, I would have no idea how, other than swapping the flash chips themselves.
                              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                              Comment

                              • shepp
                                Badcaps Veteran
                                • Mar 2012
                                • 377
                                • England

                                #35
                                Re: 37LG6000 replaced fuse but now cant change input or use remote

                                Originally posted by tom66
                                It might work fine. You may need to change panel settings. However, you cannot guarantee it will work perfectly.

                                I don't know if you'd need to swap firmware (I'd doubt it); but if you did, I would have no idea how, other than swapping the flash chips themselves.
                                the online shop said they couldnt accept the return if i changed settings in service mode and it didnt work, so its not worth the risk given the fact the board is £40

                                might as well wait a bit and see if the right one comes up

                                Comment

                                • tom66
                                  EVs Rule
                                  • Apr 2011
                                  • 32560
                                  • UK

                                  #36
                                  Re: 37LG6000 replaced fuse but now cant change input or use remote

                                  Originally posted by shepp
                                  the online shop said they couldnt accept the return if i changed settings in service mode and it didnt work, so its not worth the risk given the fact the board is £40

                                  might as well wait a bit and see if the right one comes up
                                  I would just stick it up on eBay for the price you bought it for and write it off as one you couldn't fix - I've had a few. I put the Samsung LE32N73BD up and it was gone in two hours for £45 - couldn't believe it!
                                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                  Comment

                                  • shepp
                                    Badcaps Veteran
                                    • Mar 2012
                                    • 377
                                    • England

                                    #37
                                    Re: 37LG6000 replaced fuse but now cant change input or use remote

                                    sounds like a good idea mate, gonna give it a couple a weeks or until i need the space, then put it up on there, you win some you lose some i guess....im just not very good at being defeated! lmao

                                    Comment

                                    • jpalmeida
                                      Member
                                      • May 2008
                                      • 11

                                      #38
                                      Re: 37LG6000 replaced fuse but now cant change input or use remote

                                      Originally posted by shepp
                                      I'm on my phone at the minute so can't look at the 78R data sheet to check output Mrs is on computer!

                                      400v from PSU that goes to the other PSU is only reading 275v dc, not sure if that's gonna matter to be far if the back light is working and TVs powering up
                                      This happen because you are measuring it the wrong way. To check the 400V you should use the primary ground, the hot side, be careful, the hot side is not isolated.
                                      Regards.
                                      Joao Almeida

                                      Comment

                                      Related Topics

                                      Collapse

                                      • ugamazing
                                        820-02020 Super Weird Issue: Keyboard Input Character Map "Wrong"?
                                        by ugamazing
                                        So, I have a really bizarre issue that I'm struggling to identify the cause of. Working on an 820-02020 board with some bizarre keyboard/input-source character mapping. My suspicion is a possible damaged SPI ROM (U1970), perhaps, but I'm really not sure in this case:

                                        1. The issue is pretty weird, but when installing MacOS, I noticed my WiFi password did not work. I quickly realized the special characters (!@#$%^& etc) were not mapping correctly.

                                        2. I noticed the keyboard layout/input-source is defaulting to JAPANESE every single time I restore the board. I am not...
                                        04-10-2024, 08:06 AM
                                      • corrize
                                        A funny fuse story – Lumix LX100 II
                                        by corrize
                                        Hello, I disassembled this dead camera, and found this WTF… Two fuses soldered one above the other !
                                        I was pretty sure nobody touched it before, but that can't be from factory. There is flux, and capacitor is probably missing.
                                        The other weird thing : the fuses are « G » fuse : (0.75A – 8V), seems very low. The original fuse should be « O » : (32V 2,5A).
                                        There is « O » mark beside. All fuses have the same mark letter on main board. So, I can deduce it's a « O » fuse.
                                        And this correspond to the issus I saw : when I plug the battery, I measure the voltage dropping...
                                        10-19-2023, 09:58 AM
                                      • fixit007
                                        Samsung flicker - BN44-00932T board or else?
                                        by fixit007
                                        I picked up this TV that the prior owner said - just died.

                                        Tested the fuse - burnt. A dead capacitor is visible too on the hot side (CP801). Got the replacement power board (cheaply - used). Replaced the board - the TV turned ON!

                                        Now, about a month later (yesterday) I noticed the left side of the screen was flickering from time to time. That was already happening with the antenna input, not through HDMI.

                                        Also, some glitchiness with a Fire stick on HDMI3 - I hit an app with quick dark screen in stick, the TV goes - no input. Then I had to choose the stick...
                                        05-04-2024, 06:14 PM
                                      • jesterace
                                        Samsung UE46ES8000 Blown fuse but no other signs of short
                                        by jesterace
                                        Hi I wonder if anyone might be able to steer me in the right direction. I have this Samsung UE46ES8000 TV and it went bang during use. The main fuse on the PSU board is open. I've checked every diode/mosfet/transistor I can see and nothing appears to be short to cause the fuse to go. The DC output of the bridge rectifier is not short either. I've seen online that some of these models are known for having their PFC mosfet or other mosfets shorting and blowing the fuse but i'm not seeing that here. If anyone aware of these models having any issues to cause this? I'm reluctant to just replace the...
                                        09-11-2024, 03:14 PM
                                      • AccountSaver
                                        Lenovo Thinkpad E15 Gen 2 NM-D011 - No display ? External , yes!
                                        by AccountSaver
                                        Here is a pretty crazy one.

                                        Step 1.
                                        Laptop was brought to me as dead not working. Removed everything , cleared everything.
                                        Step 2.

                                        Some liquid damage close to the Type - C connector, and the connector even though it was cleaned wasn't charging the battery . Removed the Type-C port, and replaced it. Now the laptop turns on and charges battery. Shows external screen , not internal.
                                        Step 3.

                                        Took out the screen and checked it to a secondary Gen 2 i have, screen works like a charm.
                                        Step 4.

                                        Lets ,dive into the board. I see the edp cable on the...
                                        05-07-2025, 07:16 AM
                                      • Loading...
                                      • No more items.
                                      Working...