Visio VX32L-HDTV10A - no picture

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • budm
    Badcaps Legend
    • Feb 2010
    • 40746
    • USA
    #21
    Re: Visio VX32L-HDTV10A - no picture

    OK, if the backlights are on but no pictures, then the voltage at the T-CON board fuse needs to be checked next.
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

      Comment

      • Acorlin
        Member
        • Aug 2010
        • 11
        #22
        Re: Visio VX32L-HDTV10A - no picture

        Thanks for all the help. When I took off the metal cover under the power supply and main board to expose the T-CON board it became obvious that the cable running from the main board to the T-CON board was not fully plugged in to the T-CON board. I replugged it and now the set works great. So I surmise the U33 repair was the original culprit.
        Many thanks to all of you who took your time to help me out.

          Comment

          • tom66
            EVs Rule
            • Apr 2011
            • 32560
            • UK
            #23
            Re: Visio VX32L-HDTV10A - no picture

            Nice fix. Sometimes it really is that simple.
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

              Comment

              • johnboy1313
                Badcaps Legend
                • Nov 2012
                • 1959
                • USA
                #24
                Re: Visio VX32L-HDTV10A - no picture

                Good news.

                  Comment

                  • Dman924s
                    New Member
                    • Nov 2014
                    • 2
                    • USA
                    #25
                    Re: Visio VX32L-HDTV10A - no picture

                    I have the same problem with the same model TV. If I am not an electronics technician, would it be cheaper to replace or have it repaired?

                      Comment

                      • Dman924s
                        New Member
                        • Nov 2014
                        • 2
                        • USA
                        #26
                        Re: Visio VX32L-HDTV10A - no picture

                        Worth getting repaired or buying new TV?

                          Comment

                          Previous 1 2 template Next

                          Related Topics

                          Collapse
                          • Tr0ll
                            T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
                            by Tr0ll
                            Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

                            The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

                            Original T-con:
                            Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

                            First replacement T-con:

                            I thought it might be t-con and ordered new t-con from china(supposedly tested)...
                            10-07-2023, 07:48 PM
                          • JJAAMM
                            SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
                            by JJAAMM
                            This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

                            Problem
                            TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
                            07-06-2023, 06:01 AM
                          • TR103
                            Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
                            by TR103
                            Hi, I have a Samsung UE50TU with:
                            - sound and backlight, but no picture
                            - when it arrived, it had a picture for a few seconds
                            - it keeps rebooting
                            - without ribbon cable between the two panel boards, it does not reboot but I have no picture
                            - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
                            - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

                            - without cable between mainboard and lcd panel and with a jumpered...
                            01-22-2025, 04:12 PM
                          • Mgiffune
                            Samsung UN60EH6000F Black Screen, Backlight and Sound Good. Power Cycle Returns Picture
                            by Mgiffune
                            I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.

                            I ordered a supposedly ‘new' Tcon board this time, and                            ...
                            06-09-2024, 10:28 AM
                          • CyberPhoenix
                            Issue with picture quality of Sony bravia TV
                            by CyberPhoenix
                            Hello, Last week I bought the 50" Sony X80j tv everything was working fine, untill I plugged the tv in a ups power supply 650va the tv remote control became unresponsive and the TV became laggy after a while the picture quality isn't the same as before the tv seems less brighter and the picture is somehow blurry, people's faces don't look as natural as before, there is a mini orange-pink tint to the edge of people's faces especially in NETFLIX Dolby Vision like in One Piece ep1 Alvida skin tone, my intention was to protect the tv but something went wrong I checked the ups with a multimeter,...
                            Badcaps Electronics Repair Forum & Schematic Search - Badcaps
                            https://www.badcaps.net
                            01-22-2024, 02:08 AM
                          • Loading...
                          • No more items.
                          Working...