Visio VX32L-HDTV10A - no picture

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • budm
    Badcaps Legend
    • Feb 2010
    • 40746
    • USA
    #21
    Re: Visio VX32L-HDTV10A - no picture

    OK, if the backlights are on but no pictures, then the voltage at the T-CON board fuse needs to be checked next.
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

      Comment

      • Acorlin
        Member
        • Aug 2010
        • 11
        #22
        Re: Visio VX32L-HDTV10A - no picture

        Thanks for all the help. When I took off the metal cover under the power supply and main board to expose the T-CON board it became obvious that the cable running from the main board to the T-CON board was not fully plugged in to the T-CON board. I replugged it and now the set works great. So I surmise the U33 repair was the original culprit.
        Many thanks to all of you who took your time to help me out.

          Comment

          • tom66
            EVs Rule
            • Apr 2011
            • 32560
            • UK
            #23
            Re: Visio VX32L-HDTV10A - no picture

            Nice fix. Sometimes it really is that simple.
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

              Comment

              • johnboy1313
                Badcaps Legend
                • Nov 2012
                • 1959
                • USA
                #24
                Re: Visio VX32L-HDTV10A - no picture

                Good news.

                  Comment

                  • Dman924s
                    New Member
                    • Nov 2014
                    • 2
                    • USA
                    #25
                    Re: Visio VX32L-HDTV10A - no picture

                    I have the same problem with the same model TV. If I am not an electronics technician, would it be cheaper to replace or have it repaired?

                      Comment

                      • Dman924s
                        New Member
                        • Nov 2014
                        • 2
                        • USA
                        #26
                        Re: Visio VX32L-HDTV10A - no picture

                        Worth getting repaired or buying new TV?

                          Comment

                          Previous 1 2 template Next

                          Related Topics

                          Collapse
                          • Tr0ll
                            T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
                            by Tr0ll
                            Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

                            The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

                            Original T-con:
                            Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

                            First replacement T-con:

                            I thought it might be t-con and ordered new t-con from china(supposedly tested)...
                            10-07-2023, 07:48 PM
                          • JJAAMM
                            SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
                            by JJAAMM
                            This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

                            Problem
                            TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
                            07-06-2023, 06:01 AM
                          • TR103
                            Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
                            by TR103
                            Hi, I have a Samsung UE50TU with:
                            - sound and backlight, but no picture
                            - when it arrived, it had a picture for a few seconds
                            - it keeps rebooting
                            - without ribbon cable between the two panel boards, it does not reboot but I have no picture
                            - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
                            - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

                            - without cable between mainboard and lcd panel and with a jumpered...
                            01-22-2025, 04:12 PM
                          • Daudi83
                            Gigabyte GA-EVEMLK RAZOR BLADE RZ09-00830
                            by Daudi83
                            Hello everyone. I looking for a bios dump for this laptop. Razer Blade RZ09-0083 motherboard number: GA-EVEMLK rev:1.0
                            It was another shop and they gave back with an empty bios chip.
                            01-25-2023, 07:20 AM
                          • kartush45
                            razor blade Stealth RZ09-02810E71
                            by kartush45
                            I need a schematic and BRD VIEW file for a Razor Blade Stealth RZ09-02810E71
                            02-19-2022, 10:04 AM
                          • Loading...
                          • No more items.
                          Working...