Visio VX32L-HDTV10A - no picture

[budm]

Re: Visio VX32L-HDTV10A - no picture

OK, if the backlights are on but no pictures, then the voltage at the T-CON board fuse needs to be checked next.

[Acorlin]

Re: Visio VX32L-HDTV10A - no picture

Thanks for all the help. When I took off the metal cover under the power supply and main board to expose the T-CON board it became obvious that the cable running from the main board to the T-CON board was not fully plugged in to the T-CON board. I replugged it and now the set works great. So I surmise the U33 repair was the original culprit.
Many thanks to all of you who took your time to help me out.

[tom66]

Re: Visio VX32L-HDTV10A - no picture

Nice fix. Sometimes it really is that simple.

[johnboy1313]

Re: Visio VX32L-HDTV10A - no picture

Good news.

[Dman924s]

Re: Visio VX32L-HDTV10A - no picture

I have the same problem with the same model TV. If I am not an electronics technician, would it be cheaper to replace or have it repaired?

[Dman924s]

Re: Visio VX32L-HDTV10A - no picture

Worth getting repaired or buying new TV?