Announcement

Collapse
No announcement yet.

Memorex MLT4221P stuck in standby

Collapse
X
Collapse
 
  • Page of 4
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 template Next
    #61
    Re: Memorex MLT4221P stuck in standby

    Put the original caps back in so it fits.

    Odd, that the 18V rail is working fine at 12V. What a waste of time chasing down that rail.
    --- begin sig file ---

    If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

    We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

    Please do not post inline and offsite as they slow down the loading of pages.

    --- end sig file ---

    Comment

      #62
      Re: Memorex MLT4221P stuck in standby

      yep - nice of them to confuse anyone without the service manual by marking the pcb 18v. i put the old caps back in & tested the p/s and it worked fine. since the mb died & i found out the tv is used as an all day security multi-cam monitor, the old p/s prolly is likely not gonna last that much longer in the heat either.

      Comment

      Previous 1 2 3 4 template Next
      Working...